€395.00 + IVA

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Comentários

Categorias

Marcas

Informações

1 x	Conjunto de polimento
3 x	Pastilha DCMT070204
1 x	Jogo de ferros HM 10mm
2 x	Pastilha SCMT060204
2 x	Pastilha TCMT090204
2 x	Broca de alta duração de 2.0mm
2 x	Pastilha CCMT09T304
1 x	Porta ferrametas aperto rápido SWH 1-A
2 x	Bucha 4 grampos independentes 100mm
2 x	Pastilha VCMT070204
2 x	Pastilha WCMX050308F
3 x	Broca de alta duração de 1.0mm
2 x	Pastilha WCMT050308
2 x	Ponto rotativo com pontas intermutáveis CM2
2 x	Pastilha de roscar 60º
2 x	Pastilha de roscar 60º
1 x	Peclise digital 150mm
2 x	Pastilha TCMT110204
1 x	Jogo de ferros 10 mm
1 x	Pastilha SCMT09T304
2 x	Pastilha SCMT09T304
2 x	Fresa diamante 1,8mm
2 x	Disco de corte diamantado com ventilação Ø38mm
2 x	Fresa diamante 5mm
2 x	Fresa diamante esférica 1,8mm
2 x	Fresa diamante esférica 1.2mm
2 x	Disco de corte diamantado Ø38mm
2 x	Fresa diamante esférica 1mm
1 x	Broca de alta duração de 0.8mm
2 x	Conjunto de 2 brocas diamantadas 0.8 e 1.2mm
1 x	Disco de corte diamantado com ventilação Ø20mm
1 x	Pastilha CCMT060204
1 x	Conjunto profissional de polimento e acabamento.
1 x	broca de alta duração de 0,6mm
1 x	Pastilha CCGT120404-AK
1 x	Lixa para BBS/S grão 150
1 x	BGA-Bottom-11
1 x	BGA-Bottom-1
1 x	BGA-0245/0243
1 x	BGA-Bottom-125
1 x	Fixed Steady
1 x	BGA-Bottom-106
1 x	BGA-Bottom-101
1 x	BGA-Bottom-10
1 x	DIL8/QFN8-1 ZIF-CS
1 x	Conjunto de 10 fresas para tupia
1 x	BGA-Bottom-103
1 x	BGA-Bottom-108
1 x	BGA-Bottom-127
1 x	Four Jaw Chuck
1 x	BGA-Bottom-111
1 x	BGA-0246/0244
1 x	BGA-Bottom-105

€4,885.14