Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
    submodule
  Universal programmers
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	lathe tools 10mm
1 x	Protective device for hand-operated MICROMOT
1 x	MICROMOT steel collet set
1 x	Cotton polishers
2 x	Three-jaw steel drill chuck
2 x	Multipurpose Vices Primus 75
1 x
1 x	Lathe tools 8mm pastilhados
1 x	Cotton polishers
1 x	sandpaper for PS 13 Grit 240
1 x	Grinding mop cylinder grit 120
2 x	sandpaper for PS 13 Grot 180
2 x	PLCC Extractor
1 x	sandpaper for PS 13 Grit 400
1 x	Fine dust paper filter for CW-matic
1 x	Flexible silicon discs
1 x	Grinding and Polishing Machine SP/E
2 x	Half round cutter 13mm
2 x	Grinding mop cylinder grit 240
1 x	High quality corundum grinding bits
1 x	Flexible silicon discs
1 x	Flap Wheels
1 x	Flexishaft MICROMOT 110/P
1 x	Fluted filter for CW-matic
1 x	Universal polishing paste
1 x	Four Jaw Chuck
1 x	Flat nose pliers 165mm
1 x	Chuck for TBM 220
1 x	Telephone pliers straight 205mm
1 x	MICROFLAM gas soldering set MGS
1 x	Side cutters 195mm
1 x	Telephone pliers bent 205mm
2 x	Combination pliers 210mm
1 x	Band knife of hardened spring band steel (without teeth)
2 x	Blade for Wood and Plastics
2 x	Diamond blade for MBS 240/E
1 x	Blade guides separately
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Broca de alta duração de 1.5mm
1 x	Broca de alta duração de 2.2mm
1 x	Fibre-Cut Discs
2 x	Diamond Cutting Discs
1 x	Broca de alta duração de 2.3mm
1 x	Broca de alta duração de 0.7mm
2 x	Metal Cutting Blades
1 x	Broca de alta duração de 2.5mm
2 x	Diamond Cutting Discs
1 x	Broca de alta duração de 1.3mm
1 x	Broca de alta duração de 1.1mm
2 x	Diamond Cutting Discs
1 x	Broca de alta duração de 0.4mm
1 x	Broca de alta duração de 0.3mm
2 x	Fibre-Cut Discs
1 x	Super-fine sanding discs grain 000
1 x	Broca de alta duração de 2.1mm
1 x	broca de alta duração de 0,6mm
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Fibre-Cut Discs
1 x	Slot cutter 6.5mm
1 x	Combi cutter 6.5/2.5mm
1 x	Inspector mirror
1 x	Fibre-Cut Discs
1 x	Rounding over cutter 6.4mm
1 x	Core box bit 3.2mm
1 x	Fibre-Cut Discs
1 x	10-piece wood router cutter set
1 x	Fibre-Cut Discs
1 x	Slot cutter 3.2mm
1 x	Router base OFV
2 x	Independent four jaw chuck for the DB 250
1 x	Three jaw chuck for the lathe DB 250
2 x	Drill chuck with sliding sleeve for the tailstock
2 x	Multiform grindstone
2 x	Five piece HSS chisel set
1 x	Machine Vice MS 4
1 x	Professional Drill/Grinder IBS/E
2 x	Replacement carving blades for MSG
1 x	High quality corundum grinding bits
1 x	Sanding bands 14x13mm
1 x	High quality corundum grinding bits
1 x	Sanding bands 14x13mm
1 x	End side cutters EUROline-Conductive
1 x	Disc cutters
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	Delta sander OZI/E
2 x	EUROline mini side cutter
2 x	End side cutters 45º EUROline-Conductive
1 x	Diamond blade
2 x	Round nose pliers 45º EUROline-Conductive
2 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Round nose pliers 185mm
1 x	Diamond-coated cutting and roughing disc
1 x	Diamond Grinding Bits 1,8mm
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Mini side cutters EUROline-Conductive
1 x	Side cutters 160mm
1 x	Mini side cutters EUROline-Conductive
1 x	Cross-recess Screwdrivers 0
1 x	HSS boring tool set, 6 pieces
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	Combination pliers 185mm
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Combination pliers 160mm
1 x	Cross-recess Screwdrivers 0
1 x	Combination pliers 170mm
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	ESD-handling set
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	Side cutters 180mm
1 x	Side cutters 160mm
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	Broca de alta duração de 2.4mm
1 x	Broca de ponto 5.00 x 2.00
1 x	Broca de ponto 3.15 x 1.25
1 x	Broca de ponto 6.30 x 2.50
1 x	Cylinder sander WAS/E
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	Broca de ponto 8.00 x 3.15
1 x	Beeprog2C
1 x	Conjunto de três brocas de ponto
1 x	Broca de ponto 3.15 x 1.00
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	BGA-0246/0244
1 x	DIL40/TQFP44 ZIF EM652X
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	BGA-Bottom-1
1 x	Special Fused Alumina (Hardness N).
1 x	sanding belts for BBS/s Grit 150
1 x	BGA-Bottom-125
1 x	BGA-Bottom-105
1 x	BGA-Bottom-115
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	DIL32/MLF32-1 ZIF
1 x	BGA-0245/0241
1 x	BGA-Bottom-103
1 x	DIL44/TQFP44-2 ZIF
1 x	MICROMOT Mains Adapter NG 2/S
1 x	DIL8/SSOP8 ZIF 120mil
1 x	DIL40/TQFP64 ZIF EM652X
1 x	DIL28/TSSOP28 ZIF 170mil
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL40/TQFP44 ZIF AWM-1
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	Titan Tweezers 5-037

€9,245.49