€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Combi cutter 6.5/2.5mm
1 x	V-slot cutter 6.5mm
1 x	Special Fused Alumina (Hardness N).
3 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Polishing Set
1 x	Half round cutter 13mm
1 x	Rounding over cutter 6.4mm
1 x	Universal polishing paste
1 x	Bench Circular Saw KS 230
1 x	MICROMOT glue gun HKP 220
1 x	Replacement glue sticks for HKP 220
1 x	Spare cutting wire
1 x	Precision Vice FMS 75
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Grinding mop cylinder grit 240
1 x	10-piece wood router cutter set
1 x	Fine dust paper filter for CW-matic
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Multipurpose Vices Primus100
1 x	Precision steel vice PM 40
1 x	MICRO Heat gun MH 550
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 2/S
1 x	BeeHive208S
1 x	Multipurpose Vices Primus 75
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Combination pliers 210mm
1 x	Footswitch FS
1 x	Jig saw STS 12/E
1 x	Machine Vice MS 4
1 x	Precision Vice FMZ
2 x	Super safety and specialty bit set, 75-piece
2 x	sanding belts for BBS/s Grit 80
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	ANTISTATIC 200ml
1 x	Universal and oil siphoning pump AP 12
2 x	sandpaper for PS 13 Grot 180
1 x	sandpaper for PS 13 Grit 240
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Corundum bound cutting disc for LWS
1 x	DIL28/QFN28-2 ZIF-CS
1 x	BGA-0245/0242
1 x	High quality corundum grinding bits
1 x	Round nose pliers 165mm
1 x	DIL48/SDIP56 ZIF 68HC05Bx
1 x	Felt polishers
1 x	MICROMOT 50/E
1 x	BGA-Bottom-103
1 x	BGA-Bottom-11
1 x	BGA-Bottom-101

€9,182.00