Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x
1 x	BGA-Bottom-22
1 x	BGA-Bottom-221
1 x	Ball shaped milling cutters
1 x	Bench Circular Saw KS 230
2 x	Backing disc for LWS
1 x	BGA-Top-132 ZIF-CS
2 x	Bench drill machine TBM 220
2 x	Aluminium Die-Cast
1 x	BGA-Bottom-216
1 x	BGA-Bottom-223
1 x	BGA-Top-3 ZIF-CS
1 x	Band knife of hardened spring band steel (without teeth)
1 x	BGA-Top-5 ZIF-CS
1 x	Ball-shaped diamond coated 2.2mm
1 x	sandpaper for PS 13 Grit 240
1 x	BGA-Bottom-5
1 x	Belt sander BS/E
2 x	Bench drill press TBH
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Blade for Steel and brass
1 x	Angle polisher WP/E
1 x	BGA-Bottom-217
1 x	BGA-Bottom-88
1 x	sandpaper for PS 13 Grit 400
1 x	BGA-Bottom-225
2 x	10-piece wood router cutter set
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Ball-shaped diamond coated 1.2mm
1 x	Ball-shaped diamond coated 3.2mm
2 x	14-piece parallel supports set
1 x	BGA-Bottom-231
1 x	BGA-Bottom-224
1 x	BGA-Bottom-9
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Bottom-218
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	2-speed scroll saw DSH
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	BGA-Bottom-8
1 x	Belt sander BBS/S
2 x	Angle cutter 45 °
1 x	BGA-Bottom-222
1 x	Universal polishing paste
1 x	sandpaper for PS 13 Grot 180
1 x	Bottom PSOP44 NOR-1
1 x	BGA-Bottom-229
1 x	DIL28/PLCC28 ZIF
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Dividing attachment TA 230 for PF 250
2 x	Micro Compound Table KT 70
1 x	Supercut jig saw blades of special steel
1 x	Grinding mop cylinder grit 120
1 x	DIL20/PLCC20 ZIF-CS
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	MICROMOT drill stand MB 200
1 x	Jig saw blades made of HSS
1 x	MICROMOT tool holder
1 x	Five piece HSS chisel set
1 x	Mill/Drill Unit BFB 2000.
1 x	Independent four jaw chuck for the DB 250
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	DIL16W/SOIC16 ZIF 150mil
2 x	Footswitch FS
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	MICROMOT extension cord. 300cm.
1 x	Grinding mop cylinder grit 80
1 x	MICROMOT steel collet set
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	Flexishaft MICROMOT 110/BF
1 x	Grinding mop cylinder grit 240
1 x	DIL28/PLCC32 ZIF EPROM
1 x	Bottom PSOP44 NOR-2
3 x	BGA-Bottom-101
1 x	DIL24/QSOP24 ZIF 150mil
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	DIL20/SOIC20 ZIF 200mil
1 x	Flexishaft MICROMOT 110/P
1 x	DIL28/PLCC28 ZIF-CS
1 x	Spare cutting wire
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Protective device for hand-operated MICROMOT
1 x	Three jaw chuck for the lathe DB 250
1 x	Three-jaw steel drill chuck
1 x	DIL28/PLCC84 ZIF HS538ESC01H
1 x	Bottom PSOP44 NOR-3
1 x	Grinding mop cylinder grit 120
1 x	DIL20W/PLCC20 ZIF
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	Diamond-coated cutting and roughing disc
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	Diamond-coated cutting disc for MIC
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Long neck straight drill/grinder LB/E
2 x	BGA-Bottom-115
1 x	MICROMOT 230/E
1 x	Super-fine sanding discs grain 000
1 x	Beeprog2C
1 x	BGA-Bottom-194
1 x	Tungsten carbide cutters set
2 x	BGA-0245/0242
1 x	Mill/Drill System BFW 40/E
1 x	Precision drill grinder FBS 12/EF
1 x	BGA-Bottom-207
1 x	BGA-Bottom-198
2 x	BGA-Bottom-10
1 x	Sanding pads for OZI 220/E grit 80
1 x	Super-fine sanding discs grain 400
1 x	MICROMOT 50/EF
1 x	BGA-Bottom-118
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
3 x	BeeHive204
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Professional set for finish grinding and polishing
1 x	BGA-Bottom-204
1 x	BGA-Bottom-195
3 x	BGA-Bottom-103
1 x	Edge cutter with pin 6.4mm
1 x	BGA-Bottom-199
1 x	Slot cutter 6.5mm
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	BGA-Bottom-212
1 x	Super-fine sanding discs grain 2000
1 x	Sanding pads for OZI 220/E grit 150
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Replacement glue sticks for HKP 220
1 x	Rebating cutter 6.4mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	sanding belts for BBS/s Grit 150
1 x	BGA-Bottom-20
2 x	BGA-0245/0243
1 x	BGA-Bottom-211
1 x	Microfibre cloth
2 x	BGA-0246/0243
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Sanding pads for OZI 220/E grit 240
1 x	BGA-Bottom-196
2 x	BGA-Bottom-108
1 x	HSS immersion saw blades for OZI
3 x	BGA-Bottom-11
1 x	BGA-Bottom-208
1 x	BGA-Bottom-214
1 x	Blade holders for DS 460
1 x	MICROMOT 50/E
1 x	Half round cutter 13mm
1 x	BGA-Bottom-209
2 x	BGA-Bottom-106
1 x	MICRO Miller MF 70
2 x	BGA-Bottom-111
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	BGA-Bottom-125
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	BGA-0245/0241
1 x	Professional Drill/Grinder IBS/E
1 x	HSS immersion saw blades for OZI
1 x	Rounding over cutter 6.4mm
1 x	BGA-Bottom-202
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	BGA-Bottom-2
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	BGA-Bottom-191
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Diamond cutting blade for OZI
2 x	Precision steel vice PM 40
1 x	Machine Vice MS 4
1 x	BGA-Bottom-215
1 x	Combi cutter 6.5/2.5mm
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Precision Drill/Grinder FBS 240/E
1 x	BGA-Bottom-21
1 x	sanding belts for BBS/s Grit 240
1 x	Slot cutter 3.2mm
1 x	Lambswool polishing disc
1 x	V-slot cutter 6.5mm
1 x	Step clamps made of steel
1 x	MICROMOT 50
1 x	sanding belts for BBS/s Grit 80
1 x	BeeHive208S
1 x	Slot cutter 5.0mm
1 x	Core box bit 3.2mm
1 x	HSS cutting blade for OZI
1 x	Professional polishing sponge
1 x	BGA-Bottom-192
1 x	MICRO Miller FF 230
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	MICRO Miller FF 500
1 x	BGA-Bottom-201
1 x	Chuck for TBM 220
1 x	BGA-Bottom-105
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Polishing felt, medium hard
1 x	Fine dust paper filter for CW-matic
1 x	Glass fibre contact cleaner brush
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Brass contact cleaner brush
1 x	Fluted filter for CW-matic
1 x	Replacement belts for BSL 220/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	OPTI BF20L VARIO
1 x	Hot wire cutter THERMOCUT 12/E
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Multipurpose Vices Primus 75
1 x	Hot wire cutter THERMOCUT 650
1 x	Replacement belts for BSL 220/E

€40,370.81