€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

1 x	Grinding and Polishing Machine SP/E
1 x	lathe tools 8mm
2 x	Three jaw chuck for the lathe DB 250
1 x	Tungstein carbide rasp - and cutting disc
1 x	Lathe tools 8mm pastilhados
1 x	Corundum bound cutting disc for LWS
2 x	Snipe nose pliers 45º EUROline-Conductive
1 x	RT150 - Horizontal-vertical circular dividing table
1 x	Flame shaped milling cutters
1 x	Corundum sanding discs for LWS
1 x	Cone shaped milling cutter
1 x	Multipurpose Vices Primus100
1 x	Sanding fleece for LWS
1 x	Disc cutters
1 x	lathe tools 12mm
1 x	Corundum fan sander for LWS
1 x	Machine Vice MS 4
1 x	End mill for aluminium 4mm
1 x	Precision steel vice PM 40
1 x	End mill for aluminium 3mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Precision magnetic gauge stand
1 x	End side cutters 45º EUROline-Conductive
1 x	Replacement belts for BSL 220/E
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Replacement belts for BSL 220/E
1 x	BIT-SET
1 x	Vacum SAA 901
1 x	TU 1503V
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	Five piece HSS chisel set
1 x	Side cutters EUROline-Conductive
1 x	Replacement belts for BSL 220/E
1 x	DIL48/LQFP64 ZIF M16C/Tiny
1 x	Mini side cutters EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Wood Lathe DB450
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	End side cutters EUROline-Conductive
1 x	EUROline-Conductive set of pliers
1 x	Mini side cutters EUROline-Conductive
1 x	Independent four jaw chuck for the DB 250
1 x	MICRO Miller FF 500
1 x	BGA-Bottom-111

€5,775.53