€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Manufacturers

Information

2 x	Three piece thread cutting set
1 x	Conjunto de três brocas de ponto
1 x	Combi cutter 6.5/2.5mm
1 x	Thicknesser DH 40
1 x	Diamond-coated cutting and roughing disc
1 x	Tungsten carbide drills Ø1,5mm
1 x	Corundum sanding discs for LWS
1 x	HSS drill bits 1.0mm
1 x	Digital caliper gauge 300 mm
1 x	Slot cutter 6.5mm
1 x	Cutting disc, with reinforcement
1 x	Polishing Set
1 x	Screwdriver bit set. 49-piece.
1 x	TU 2404
1 x	High quality corundum grinding bits
1 x	Rebating cutter 6.4mm
1 x	Tungsten carbide drills Ø1mm
1 x	Multiform grindstone
1 x	HSS drill bits 1.2mm
1 x	Corundum fan sander for LWS
1 x	Hot wire cutter THERMOCUT 650
1 x	TU 2004V
1 x	HSS drill bits 0.5mm
1 x	Diamond Coated
1 x	Table Sawr TKS 315 E
1 x	Tungsten Carbide Tipped (TCT)
1 x	HSS drill bits 1.6mm
1 x	Slot cutter 5.0mm
1 x	Corundum sanding discs for LWS
1 x	Diamond Cutting Discs
1 x	Nylon Fleece Brushes
1 x	Professional set for finish grinding and polishing
1 x	Table Saw TKS 2500 SC
1 x	Sanding Drums
1 x	Angle cutter 45 °
1 x	Corundum grinding disc for LWS
1 x	Tungsten carbide drills Ø2mm
1 x	Backing disc for LWS
1 x	Core box bit 3.2mm
1 x	Replacement carving blades for MSG
1 x	Sanding Drums
1 x	Slot cutter 3.2mm
1 x	Super safety and specialty bit set, 75-piece
1 x	Metal Cutting Blades
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	HSS drill bits 0.8mm
1 x	V-slot cutter 6.5mm
1 x	Sanding bands 14x13mm
1 x	TU 1503V
1 x	Diamond Cutting Discs
1 x	BGA-0245/0242
1 x	Lever Dial Indicator
1 x	Hand magnifier with LED light 3X
1 x	ESD Tweezers 5-193

€8,439.83