Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0254/0241

€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	BGA-Bottom-215
1 x	Insulation Resistance Tester MG125
1 x	Insulation Resistance Tester MG500
1 x	BGA-Bottom-209
1 x	BGA-Bottom-21
1 x	BGA-Bottom-196
1 x	BGA-Bottom-214
1 x	BGA-Bottom-199
1 x	BGA-Bottom-202
1 x	BGA-Bottom-192
1 x	BGA-Bottom-198
1 x	BGA-Bottom-204
1 x	BGA-Bottom-194
1 x	BGA-Bottom-208
1 x	HSS cutting blade for OZI
1 x	BGA-Bottom-207
1 x	BGA-Bottom-195
1 x	BGA-Bottom-211
1 x	BGA-Bottom-191
1 x	BGA-Bottom-20
1 x	BGA-Bottom-201
1 x	Thicknesser DH 40
1 x	BGA-Bottom-212
1 x	BGA-Bottom-2
2 x	BeeHive208S
2 x	Replacement belts for BSL 220/E
2 x	BGA-0246/0243
1 x	BGA-Bottom-16
2 x	BGA-0245/0241
1 x	BGA-Bottom-173
1 x	BGA-Bottom-125
1 x	BGA-Bottom-18
1 x	Gear Chuck
3 x	BGA-Bottom-11
1 x	BGA-Bottom-170
2 x	BGA-Bottom-103
2 x	BGA-Bottom-115
1 x	BGA-Bottom-164
1 x	BGA-Bottom-180
1 x	BGA-Bottom-153
1 x	BGA-Bottom-150
1 x	BGA-Bottom-151
1 x	BGA-Bottom-174
1 x	BGA-Bottom-177
1 x	BGA-Bottom-118
1 x	BGA-Bottom-169
2 x	BGA-Bottom-105
1 x	Blade holders for DS 460
1 x	BGA-Bottom-19
1 x	BGA-Bottom-167
2 x	BGA-Bottom-108
2 x	BGA-0246/0244
1 x	BGA-Bottom-154
1 x	BGA-Bottom-157
1 x	BGA-Bottom-165
1 x	BGA-Bottom-187
1 x	BGA-Bottom-171
2 x	BGA-Bottom-111
1 x	Grinding and Polishing Machine SP/E
1 x	BGA-Bottom-166
1 x	Supercut jig saw blades of special steel
1 x	BGA-Bottom-229
1 x	Beeprog2C
1 x	Bottom PSOP44 NOR-1
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Bottom-217
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	BGA-Bottom-218
1 x	BGA-Bottom-106
1 x	BGA-Bottom-222
1 x	BGA-Bottom-5
1 x	BGA-Bottom-88
1 x	BGA-Top-5 ZIF-CS
1 x	BGA-Bottom-221
1 x	BGA-Bottom-223
1 x	BGA-Bottom-216
1 x	BGA-0245/0243
1 x	MICRO-screwdrivers
1 x	BGA-Top-132 ZIF-CS
1 x	BGA-Bottom-9
1 x	BGA-Bottom-22
1 x	BeeProg2
1 x	BGA-Top-4 ZIF-CS
1 x	BGA-Bottom-224
1 x	BGA-Bottom-231
1 x	BGA-Bottom-8
2 x	BGA-Bottom-10
1 x	BGA-Bottom-102
1 x	BGA-Bottom-225
1 x	Jig saw blades made of HSS
1 x	Earth wire
1 x	Sanding pads for OZI 220/E grit 240
1 x	Earthing module
1 x	Crocodile clip
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Three-jaw steel drill chuck
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	DIL48/PLCC52 ZIF-CS 68HC11
1 x	Earth wire
1 x	Earth wire with dummy Schunko-plug
1 x	Contact bracelet with spiral cord
1 x	ESD Tweezers 5-191
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	Conj 5 pinças ESD
1 x	Crosscut 'Super-Cut' blade
1 x	ESD Tweezers 5-192
1 x	Screwdriver 4.0
1 x	Screwdriver 0.8
1 x	Screwdriver 5.5
1 x	DIL44/TQFP44-1 Zif
1 x	DIL40/TQFP80-1 ZIF AWM-1
1 x	DIL44/TQFP44-3 ZIF
1 x	DIL40/TQFP44 ZIF EM652X
1 x	Screwdriver 3.0
1 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	Screwdriver 1.5
1 x	DIL40/TQFP44 ZIF PIC-1
1 x	DIL40/TQFP64 ZIF EM652X
1 x	ESD Tweezers 5-194
1 x	Screwdriver 2.5
1 x	Tungsten Carbide Tipped (TCT)
1 x	DIL40/TQFP44-1 ZIF MCS51
1 x	DIL48/TQFP48-1 ZIF
1 x	DIL48/TQFP144 ZIF ST10-1
1 x	Sanding Drums
1 x	DIL40/TQFP52 ZIF EM652X
1 x	Screwdriver 1.2
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	DIL48/TQFP64 ZIF HC908-1
1 x	DIL40/TQFP64 ZIF CC-1
2 x	Replacement glue sticks for HKP 220
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	DIL48/TQFP100 ZIF PLD-2
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	ESD Tweezers 5-193
1 x	6-piece set of ESD/EGB tweezers
1 x	DIL40/TQFP64 ZIF AVRmega-2
1 x	Screwdriver 2.0
1 x	DIL48/TQFP100-2 ZIF PLD-1
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	ESD Tweezers 5-195
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	DIL44/TQFP44-2 ZIF
1 x	Screwdriver 1.8
1 x	Screwdriver 5.5
1 x	DIL48/MQFP80 ZIF C164
1 x	10-piece wood router cutter set
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
3 x	Slot cutter 3.2mm
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	Cross-recess Screwdrivers 1
1 x	Cotton polishers
1 x	DIL48/QFP100 ZIF PLD-1
1 x	Felt polishers
1 x	6-piece screwdriver and cross-recess set ESD
1 x	DIL32/QFP64 ZIF H8-1
1 x	Flexible silicon discs
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
1 x	Mini side cutters EUROline-Conductive
1 x	DIL32/SOIC32 ZIF 300 mil
1 x	Floor cover ESD
1 x	Flexible silicon discs
1 x	Mini side cutters EUROline-Conductive
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	Felt polishers
1 x	V-slot cutter 6.5mm
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	Core box bit 3.2mm
1 x	Solid carbide stylus for engraving
1 x	Set of precision cutters
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	Wolfram vanadium steel milling bits
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Cross-recess Screwdrivers 0
1 x	6-piece screwdriver set ESD
1 x	Cross-recess Screwdrivers 000
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	Tungsten carbide cutter 1.0mm
1 x	DIL40/QFP144 ZIF LPC-1
1 x	DIL16/SOIC16 ZIF 200 mil
1 x	Cone shaped milling cutter
1 x	Cylindrical cutters
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL40/QFP100 ZIF AVR-1
1 x	DIL48/QFP100 ZIF PLD-4
1 x	6-piece wrench key set ESD
1 x	Half round cutter 13mm
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	DIL48/QFP100 ZIF PLD-2
1 x	Ball shaped milling cutters
1 x	Combi cutter 6.5/2.5mm
1 x	DIL32/SOIC32 ZIF 445mil
1 x	Cross-recess Screwdrivers 2
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
2 x	Rebating cutter 6.4mm
2 x	EUROline-Conductive set of pliers
1 x	DIL14W/SOIC14 ZIF 150mil
1 x	Flexible silicon discs
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	ACCENT SERVICE TOOLS SET
1 x	6-piece socket wrenches ESD
1 x	Cross-recess Screwdrivers 1
1 x	Felt polishers
1 x	Cotton polishers
1 x	Flame shaped milling cutters
1 x	Slot cutter 5.0mm
1 x	Tungsten carbide cutters set
1 x	DIL40/QFP64-4 ZIF NEC-1
1 x	Disc cutters
1 x	Cross-recess Screwdrivers 00
1 x	DIL28W/SOIC28 ZIF 300mil
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	DIL40/TSOP40 ZIF-CS 12.4mm
1 x	Flexible polishing pad set
1 x	DIL40/SOIC16 ZIF MB-1
1 x	Wolfram vanadium steel milling bits
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	Angle cutter 45 °
1 x	DIL28/SOIC28 ZIF 330 mil
1 x	DIL40/MQFP52 ZIF ADuC812
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	End side cutters EUROline-Conductive
1 x	DIL48/QFP100 ZIF PLD-3
1 x	DIL44/SOIC44 ZIF-CS
1 x	DIL40/SOIC28 ZIF AWM-1
1 x	End side cutters 45º EUROline-Conductive
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	Flexible polishing pad set
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	DIL48/MQFP80 ZIF C500
1 x	Polishing paste
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	DIL44/TSOP44-II ZIF 400mil
1 x	Rounding over cutter 6.4mm
1 x	DIL48/TSOP48 ZIF 18.4mm
1 x	Felt polishers
1 x	6-piece TORX-screwdriver-set ESD
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	DIL48/QFP100 ZIF NEC-1
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL40/QFP64 ZIF LPC-1
1 x	Edge cutter with pin 6.4mm
1 x	DIL20/SOIC20 ZIF 200mil
1 x	DIL40/TSOP40 ZIF 18.4mm
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Side cutters EUROline-Conductive
1 x	DIL48/QFP100 ZIF NEC-2
1 x	DIL20W/SOIC20 ZIF 300mil
1 x	Tungsten carbide cutter 3.0mm
1 x	DIL40/QFP144 ZIF H8S-1
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	DIL40/SOIC20 ZIF AWM-1
1 x	Mini side cutters EUROline-Conductive
1 x	Cross-recess Screwdrivers 2
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-2
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL20/SOIC20 ZIF 300 mil
1 x	DIL40/QFP80 ZIF M37702
1 x	Cotton polishers
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Socket Wrenches 3.2
1 x	Socket Wrenches 1.5
1 x	Socket Wrenches 3.5
1 x	Socket Wrenches 2.5
1 x	BGA-Bottom-126
1 x	BGA-0245/0242

€48,662.89