Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Precision caliper square
4 x	HSS twist drill set to DIN 338
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	PLCC Puller
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	MICRO shaper MP 400
1 x	Side cutters EUROline-Conductive
1 x	PLCC Extractor
2 x	Mini side cutters EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Plastic magnifying glass
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	MICRO Band Saw MBS 240/E
1 x	Diamond blade
1 x	TORX-screwdrivers T10
2 x	Socket Wrenches 5.5
2 x	Socket Wrenches 3.5
2 x	Socket Wrenches 4.0
2 x	Tungsten carbide drills Ø2mm
1 x	TORX-screwdrivers T10
1 x	Sanding Drums
1 x	TORX-screwdrivers T20
1 x	Tungsten carbide drills Ø1,5mm
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	Socket Wrenches 1.5
1 x	TORX-screwdrivers T5
1 x	ESD Brushe
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x	Socket Wrenches 4.5
1 x	HSS drill bits 1.6mm
1 x	ESD Tweezers 5-195
1 x	TORX-screwdrivers T4
1 x	ESD Tweezers 5-192
1 x	TORX-screwdrivers T8
1 x	Tungsten carbide drills Ø1mm
1 x	ESD Tweezers 5-191
1 x	TORX-screwdrivers T7
1 x	HSS drill bits 0.5mm
1 x	End side cutters EUROline-Conductive
2 x	Socket Wrenches 2.0
2 x	HSS drill bits 1.2mm
1 x	TORX-screwdrivers T15
1 x	ESD Tweezers 5-194
1 x	Slot cutter 6.5mm
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	TORX-screwdrivers T9
1 x	MICROMOT glue gun HKP 220
2 x	Socket Wrenches 3.0
1 x	TORX-screwdrivers T6
1 x	HSS twist drill set with centring pin
3 x	Replacement belts for BSL 220/E
3 x	Replacement belts for BSL 220/E
3 x	Replacement belts for BSL 220/E
3 x	Replacement belts for BSL 220/E
1 x	Conjunto de três brocas de ponto
1 x	Tungsten Carbide Tipped (TCT)
1 x	Wrench Keys 0.9
1 x	3-jaw chuck centrically clamping 80mm
2 x	Professional polishing sponge
1 x	Five piece HSS chisel set
1 x	Socket Wrenches 5.0
1 x	Wrench Keys 1.5
1 x	3-jaw chuck centrically clamping 125mm
1 x	Wrench Keys 0.7
1 x	3-jaw chuck centrically clamping 160mm
1 x	3-jaw chuck centrically clamping 100mm
1 x	Wrench Keys 1.3
1 x	centrically clamping 100mm
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	surface planing and thicknessing ADH 200
1 x	centrically clamping 125mm
1 x	4-jaw chuck individually clamping 100mm
1 x
3 x	Independent four jaw chuck for the DB 250
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Inspector mirror
1 x	IC tweezers
1 x	EUROline-Conductive set of pliers
1 x	Mini side cutters EUROline-Conductive
1 x	Floor cover ESD
1 x	Hand magnifier with LED light 3X
1 x	Inpection mirror 1-978
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Hand Magnifier 2-293
1 x	Flap Wheels
2 x	Vacum SAA 901
1 x	Glass fibre contact cleaner brush
1 x	Mini side cutters EUROline-Conductive
1 x	Glass fibre contact cleaner brush
1 x	Cross-recess Screwdrivers Pozidriv 2
2 x	Table Saw FET
1 x	Screwdriver 4.0
1 x	Angle cutter 45 °
1 x	Corundum fan sander for LWS
1 x	Screwdriver 2.5
2 x	Rounding over cutter 6.4mm
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Screwdriver 5.5
1 x	Screwdriver 5.5
1 x	Edge cutter with pin 6.4mm
1 x	Long neck angle grinder LHW
2 x	surface planing and thicknessing ADH 250
1 x	Four Jaw Chuck
2 x	Surface planer AH 80
2 x	Microfibre cloth
1 x	V-slot cutter 6.5mm
2 x	Pinça SOIC de 8 pinos
1 x	Super safety and specialty bit set, 75-piece
1 x	BGA-Bottom-177
1 x	BGA-Bottom-231
2 x	Super-fine sanding discs grain 400
1 x	BGA-Bottom-191
1 x	Professional set for finish grinding and polishing
1 x	BGA-Bottom-194
1 x	BGA-Bottom-224
1 x	Steel wheels
2 x	Super-Cut
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	BGA-Bottom-16
1 x	BGA-Top-3 ZIF-CS
1 x	Router base OFV
1 x	Fibre-Cut Discs
1 x	Sanding bands 14x13mm
1 x	Backing disc for LWS
1 x	Rebating cutter 6.4mm
1 x	BGA-Bottom-164
1 x	BGA-Bottom-165
1 x	BGA-Bottom-8
1 x	Step clamps made of steel
1 x	BGA-Bottom-5
1 x	Polishing felt, medium hard
1 x	BGA-Bottom-19
1 x	BGA-Bottom-88
1 x	BGA-Bottom-169
1 x	Three-jaw steel drill chuck
1 x	Lambswool polishing disc
1 x	BGA-Bottom-170
1 x	Steel cups
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	BGA-Bottom-173
1 x	BGA-Top-132 ZIF-CS
1 x	BGA-Bottom-221
1 x	Sanding bands 14x13mm
1 x	Supercut jig saw blades of special steel
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	BGA-Bottom-9
1 x	BGA-Bottom-222
2 x	Super-fine sanding discs grain 000
1 x	Tool holder for rotary tools
1 x	BGA-Bottom-180
1 x	BGA-Bottom-166
1 x	BGA-Bottom-225
1 x	Replacement carving blades for MSG
1 x	BGA-Bottom-187
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	BGA-Bottom-167
1 x	BGA-Top-4 ZIF-CS
1 x	Tungsten carbide cutter 1.0mm
1 x	BGA-Bottom-223
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	BGA-Bottom-171
1 x	Fibre-Cut Discs
1 x	BGA-Bottom-174
1 x	BGA-Bottom-195
1 x	Protective device for hand-operated MICROMOT
2 x	Super-fine sanding discs grain 2000
1 x	BGA-Bottom-157
1 x	BGA-Top-5 ZIF-CS
1 x	Three jaw chuck for the lathe DB 250
1 x	BGA-Bottom-229
1 x	Tungstein carbide rasp - and cutting disc
1 x	BGA-Bottom-192
1 x	Combi cutter 6.5/2.5mm
1 x	BGA-Bottom-126
1 x	BGA-Bottom-21
1 x	BGA-Bottom-216
1 x	BGA-Bottom-218
1 x	BGA-Bottom-199
1 x	BGA-Bottom-115
1 x	BGA-Bottom-2
1 x	BGA-Bottom-209
2 x	BGA-0245/0243
1 x	BGA-Bottom-212
2 x	BGA-0245/0242
1 x	Grinding mop cylinder grit 240
1 x	BGA-Bottom-217
2 x	BGA-Bottom-105
1 x	BGA-Bottom-22
2 x	BGA-0246/0243
1 x	BGA-Bottom-208
1 x	BGA-Bottom-10
1 x	BGA-Bottom-211
1 x	BGA-Bottom-106
1 x	BGA-Bottom-202
2 x	BGA-Bottom-102
1 x	Revolving center with replacement lathe centers
1 x	BGA-Bottom-215
1 x	BGA-Bottom-108
1 x	BGA-Bottom-11
1 x	BGA-Bottom-198
1 x	BGA-Bottom-201
1 x	BGA-Bottom-20
2 x	BGA-Bottom-101
1 x	BGA-Bottom-207
1 x	BGA-Bottom-214
2 x	BGA-Bottom-103
1 x	BGA-Bottom-204
2 x	BGA-0246/0244
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-6
1 x	DIL28/TSOP28 ZIF 11,8mm Flash
1 x	DIL32/TSOP32 ZIF 12.4mm Flash
1 x	Belt sander BS/E
1 x	BGA-Bottom-111
1 x	sanding belts for BBS/s Grit 80
1 x	sanding belts for BBS/s Grit 240
1 x	Delta sander OZI/E
1 x	BGA-Bottom-127
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-3
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	DIL48/TSOP56 ZIF 18.4mm Flash-5
1 x	DIL40/TSOP40 ZIF 18.4mm Flash-1
1 x	BGA-Bottom-118
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	BGA-Bottom-125
1 x	DIL48/TSOP48 ZIF 15.4mm
1 x	Disc Sander TG 250/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Replacement glue sticks for HKP 220
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	IC Test clip 20 pins

€22,246.66