Top » Catalog » Programmers and acessories » Socket converters » Converters » DIL/BGA » 70-0245/0242

€395.00 + VAT

BGA-0245/0242
[70-0245/0242]

BGA-0245/0242

special converter, assigned for memories in BGA package, for example S29AL016MxxBxx01 in BGA48
top board: BGA-Top-2 ZIF-CS (order no. 70-0242)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0242

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
  GANG programmers
  Socket converters->
    Converters->
      DIL/BGA
      DIL/LQFP
      DIL/MLF
      DIL/MQFP
      DIL/PLCC
      DIL/PQFP
      DIL/PSOP
      DIL/QFN
      DIL/QFP
      DIL/QSOP
      DIL/SDIP
      DIL/SOIC
      DIL/SOT
      DIL/SSOP
      DIL/TQFP
      DIL/TSOP
      DIL/TSSOP
      DIL/VQFP
  Universal programmers
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Slot cutter 6.5mm
1 x	DCMT070204
2 x	Core box bit 3.2mm
1 x	Rounding over cutter 6.4mm
1 x	Dial gauge
1 x	Steel brushes
1 x	BGA-Bottom-149
1 x	BGA-Bottom-139
1 x	BGA-Bottom-131
1 x	BGA-Bottom-151
1 x	BGA-Bottom-111
1 x	Stainless steel brushes
1 x	BGA-Bottom-150
1 x	BGA-Bottom-135
2 x	Brass brushes
1 x	BGA-Bottom-126
1 x	BGA-Bottom-148
1 x	BGA-0245/0243
2 x	Combi cutter 6.5/2.5mm
1 x	Steel wheels
1 x	BGA-Bottom-118
1 x	Steel cups
2 x	Cups brushes
1 x	TU 1503V
1 x	Glass fibre contact cleaner brush
1 x	BGA-Bottom-145
1 x	BGA-Bottom-147
1 x	BGA-Bottom-15
1 x	BGA-Bottom-141
1 x	BGA-Bottom-106
2 x	Ball shaped milling cutters
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Stainless steel cups
1 x	BGA-Bottom-132
1 x	BGA-Bottom-153
1 x	Wheels brushes
1 x	Glass fibre contact cleaner brush
1 x	BGA-Bottom-144
1 x	BGA-Bottom-154
1 x	Stainless steel wheels
1 x	BGA-0245/0241
1 x	TU 2404
1 x	BGA-Bottom-146
1 x	BGA-Bottom-138
1 x	BGA-Bottom-14
3 x	Broca de alta duração de 0.7mm
1 x	BGA-Bottom-125
1 x	TU 2004V
1 x	BGA-Bottom-140
1 x	BGA-Bottom-13
1 x	Diamond Grinding Bits 1,8mm
1 x	DIL48/QFP144 ZIF PLD-1
1 x	Metal Cutting Blades
1 x	Disc Sander TG 125/E
2 x	Diamond Twist Drills
3 x	Tungsten Carbide Tipped (TCT)
1 x	DIL48/QFP144 ZIF H8S-3
2 x	MICROFLAME burner MFB/E
1 x	Delta sander OZI/E
1 x	DIL48/QFP80 ZIF-CS Z8F-1
1 x	Broca de alta duração de 1.1mm
1 x	Three piece thread cutting set
1 x	DIL48/QFP80-1 ZIF MCS51-1
2 x	High quality corundum grinding bits
2 x	DIL48/SSOP90 ZIF Flash-1
1 x	HSS drill bits 0.5mm
4 x	Diamond Coated
2 x	Diamond Cutting Discs
1 x	DIL44/SSOP44 ZIF 240mil
1 x	Tungsten carbide drills Ø2mm
2 x	Diamond Cutting Discs
1 x	HSS drill bits 1.2mm
1 x	DIL48/QFP144 ZIF H8S-2
1 x	DIL48/QFP144 ZIF PLD-2
1 x	DIL48/QFP64 ZIF 68HC-1
1 x	Cylindrical cutters
1 x	Diamond blade
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	DIL48/QFP80-1 ZIF HC908-1
1 x	DIL48/QFP100-1 ZIF NEC-3
1 x	DIL48/QFP64-1 ZIF-CS NEC78K-1
1 x	Screwdriver bit set. 49-piece.
1 x	DIL48/QFP100-1 ZIF M16C/62-1
1 x	Tungsten carbide drills Ø1mm
1 x	Tungsten carbide drills Ø1,5mm
2 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 1mm
2 x	Diamond-coated cutting and roughing disc
1 x	High quality corundum grinding bits
1 x	HSS drill bits 1.0mm
1 x	DIL48/QFP64 ZIF PLD-1
1 x	Diamond blade for MBS 240/E
2 x	Diamond-coated cutting disc for MIC
1 x	DIL48/QFP100-2 ZIF M16C/62-1
3 x	Sanding Drums
1 x	DIL48/QFP80 ZIF HCS12-1
1 x	DIL8/SSOP8 ZIF 120mil
1 x	Diamond Grinding Bits 1,8mm
1 x	DIL48/QFP64 ZIF MSP430-1
1 x	DIL48/QFP64 ZIF 68HC-2
1 x	Disc cutters
1 x	DIL48/QFP120 ZIF-CS HD64F-1
1 x	HSS drill bits 0.8mm
2 x	Diamond cutting blade for OZI
1 x	DIL48/QFP208 ZIF PLD-1
2 x	Diamond Cutting Discs
1 x	Diamond Grinding Bits 5mm
1 x	Disc Sander TG 250/E
3 x	Sanding Discs
1 x	DIL48/QFP64 ZIF HD64-1
1 x	HSS drill bits 1.6mm
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Felt polishers
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Corundum fan sander for LWS
1 x	quantum revolving center CM2
2 x	Corundum grinding disc for LWS
1 x	Collet Set for accurate use on round components
1 x	Fixed Steady
1 x	Blade for Steel and brass
1 x	Fibre-Cut Discs
2 x	Conjunto de três brocas de ponto
1 x	Fibre-Cut Discs
2 x	Backing disc for LWS
1 x	Scroll saw DS 230/E
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Five piece HSS chisel set
2 x
2 x	Complete Engraving Kit with trial glass
3 x	2-speed scroll saw DSH
1 x	Cone shaped milling cutter
2 x	Corundum fan sander for LWS
1 x	Blade holders for DS 460
1 x	Jig saw STS 12/E
1 x	Hot wire cutter THERMOCUT 650
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Flame shaped milling cutters
1 x	Blade for Wood and Plastics
1 x	Coarse-toothed (10 TPI per 25mm)
2 x	Thicknesser DH 40
2 x	Chuck for TBM 220
1 x	Fine dust paper filter for CW-matic
1 x	Felt polishers
2 x	Corundum grinding disc for LWS
1 x	Broca de alta duração de 0.4mm
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Felt polishers
3 x	Engraving tool GG
1 x	Edge cutter with pin 6.4mm
1 x	Motor-driven carving device MSG
1 x	Fibre-Cut Discs
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Cut off/mitre saw KGS 80
1 x	Belt sander BS/E
2 x	Bench Circular Saw KS 230
1 x	Blade guides separately
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Polishing Set
1 x	quantum revolving center CM1
1 x	10-piece wood router cutter set
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	Corundum sanding discs for LWS
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Fibre-Cut Discs
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Corundum sanding discs for LWS
2 x	Bench drill press TBH
1 x	Ball-shaped diamond coated 3.2mm
1 x	Super safety and specialty bit set, 75-piece
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Table Saw FET
1 x	MICRO Band Saw MBS 240/E
1 x	Professional set for finish grinding and polishing
1 x	Surface planer AH 80
1 x	Belt sander BBS/S
1 x	Felt polishers
1 x	MICRO cutter MIC
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Fibre-Cut Discs
2 x	Sanding bands 14x13mm
3 x	DIL44/QFN44-2 ZIF-CS
3 x	DIL48/QFN48 ZIF-CS
1 x	Microfibre polishing wheel, 15-ply (100mm)
2 x	Nylon Fleece Brushes
1 x	4-jaw chuck individually clamping 80mm
2 x	Bottom PSOP44 NOR-2
1 x	Independent four jaw chuck for the DB 250
1 x	Replacement belts for BSL 220/E
1 x	Cutting disc, with reinforcement
2 x	Router base OFV
1 x	Cylinder shaped milling cutters
2 x	Sanding Discs
1 x	Replacement glue sticks for HKP 220
2 x	Lathe tools 10mm pastilhados
2 x	Sanding Drums
1 x	Step clamps made of steel
1 x	Dividing attachment TA 230 for PF 250
1 x	Cotton polishers
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Three-jaw steel drill chuck
1 x	Crosscut 'Super-Cut' blade
3 x	DIL28/QFN28-2 ZIF-CS
1 x	Universal and oil siphoning pump AP 12
1 x	Cotton polishers
2 x	Sanding Drums
1 x	Corundum bound cutting disc for LWS
1 x	Cotton polishers
1 x	Mini side cutters EUROline-Conductive
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Sanding Drums
1 x	Centre Turning Attachment
1 x	Three jaw chuck for the lathe DB 250
1 x	Pensander PS 13
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Flap Wheels
1 x	DIL48/QFP100 ZIF MB90F-1
1 x	Grinding mop cylinder grit 120
1 x	Universal holder UHZ
1 x	Flexishaft MICROMOT 110/BF
1 x	DIL32/QFP64 ZIF H8-1
1 x	BGA-Bottom-166
1 x	Sanding fleece for LWS
1 x	BGA-Bottom-19
1 x	BGA-Bottom-187
1 x	Super-fine sanding discs grain 000
1 x	Super-Cut
1 x	DIL48/QFP100 ZIF PLD-2
1 x	Fluted filter for CW-matic
1 x	Gear Chuck
1 x	BGA-Bottom-191
1 x	DIL48/SSOP70 ZIF OKI-1
1 x	BGA-Bottom-157
1 x	Grinding mop cylinder grit 80
1 x	Lambswool polishing disc
1 x	DIL28/QFP52 ZIF-CS SX52
1 x	DIL40/QFP144 ZIF LPC-1
1 x	Four Jaw Chuck
1 x	DIL40/QFP144 ZIF H8S-1
1 x	MICRO Heat gun MH 550
1 x	DIL28/QFP64 ZIF H8/3644
1 x	DIL40/QFP64-1 ZIF-CS NEC-1
2 x	Flexible silicon discs
1 x	BGA-Bottom-194
1 x	Grinding mop cylinder grit 240
1 x	MICROFLAM gas soldering set MGS
1 x	DIL40/QFP64-2 ZIF-CS NEC-1
1 x	MICRO-screwdrivers
1 x	BGA-Bottom-180
2 x	Flexible silicon discs
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	BGA-Bottom-16
1 x	BGA-Bottom-165
1 x	BGA-Bottom-169
1 x	Super-fine sanding discs grain 2000
1 x	BGA-Bottom-171
1 x	DIL34/SSOP34-1 ZIF-CS
1 x	Footswitch FS
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	DIL48/QFP100 ZIF PLD-4
1 x	DIL48/SSOP56 ZIF Flash-2
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	BGA-Bottom-177
1 x	Flap Wheels
1 x	DIL48/SSOP48 ZIF 300mil
1 x	DIL48/QFP100 ZIF MSP430-1
1 x	BGA-Bottom-174
1 x	Flexible polishing pad set
1 x	DIL48/QFP100 ZIF PLD-3
1 x	Flexishaft MICROMOT 110/P
1 x	DIL48/QFP100 ZIF PLD-1
1 x	BGA-Bottom-195
1 x	Flexible silicon discs
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	DIL40/QFP80 ZIF M37702
1 x	DIL40/QFP100 ZIF AVR-1
1 x	BGA-Bottom-167
1 x	Broca de alta duração de 2.1mm

€32,045.03