Top » Catalog » Drilling-milling machine » End mill » 3350212

€198.00 + VAT

Cutter head for copy and surface milling MT2
[3350212]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 2
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT2/M10
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Supercut jig saw blades of special steel
1 x	Jig saw blades made of HSS
1 x	Spare cutting wire
1 x	Crosscut 'Super-Cut' blade
2 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Solid carbide saw blade
1 x	Saw blade made of high-alloy special steel
1 x	Footswitch FS
1 x	Revolving center with replacement lathe centers
1 x	quantum revolving center CM1
1 x	Tungsten tipped saw blade
1 x	EUROline snipe nose pliers
1 x	quantum revolving center CM2
1 x	Diamond blade
2 x	Grinding mop cylinder grit 120
1 x	Grinding mop cylinder grit 120
1 x	Micro Compound Table KT 70
1 x	Tungsten carbide cutters set
1 x	Replacement belts for BSL 220/E
1 x	Slot cutter 6.5mm
1 x	Polishing Set
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICRO-screwdrivers
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Grinding mop cylinder grit 80
1 x	Grinding mop cylinder grit 240
1 x	Independent four jaw chuck for the DB 250
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Sanding fleece for LWS
1 x	MICRO Heat gun MH 550
1 x	Router base OFV
1 x	Backing disc for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Corundum fan sander for LWS
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Edge cutter with pin 6.4mm
1 x	MICROFLAME burner MFB/E
1 x	Slot cutter 3.2mm
1 x	Three piece thread cutting set
1 x	Corundum sanding discs for LWS
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	EUROline end cutter
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Replacement belts for BSL 220/E
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	MICROMOT glue gun HKP 220
1 x	Half round cutter 13mm
1 x	Combi cutter 6.5/2.5mm
1 x	Corundum sanding discs for LWS
1 x	Universal and oil siphoning pump AP 12
1 x	Diamond-coated cutting disc for MIC
1 x	Silicon-Carbide.
1 x	Slot cutter 5.0mm
1 x	Special Fused Alumina (Hardness N).
1 x	Core box bit 3.2mm
1 x	Corundum grinding disc for LWS
1 x	Replacement glue sticks for HKP 220
1 x	Precision lathe PD 250/E
1 x	Angle cutter 45 °
1 x	Five piece HSS chisel set
1 x	Rounding over cutter 6.4mm
1 x	HSS boring tool set, 6 pieces
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Corundum fan sander for LWS
1 x	Sanding fleece for LWS
1 x	Rebating cutter 6.4mm
1 x	Lathe System PD 400
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	10-piece wood router cutter set
1 x	Universal holder UHZ
1 x	Corundum bound cutting disc for LWS
1 x	Corundum grinding disc for LWS
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Step clamps made of steel
1 x	Complete Engraving Kit with trial glass
1 x	Machine Vice MS 4
1 x	V-slot cutter 6.5mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Blade holders for DS 460
1 x	Engraving tool GG
1 x	Diamond-coated cutting and roughing disc
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Precision steel vice PM 40
1 x	MICROFLAM gas soldering set MGS
1 x	Super safety and specialty bit set, 75-piece
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	4-jaw chuck individually clamping 100mm
1 x	centrically clamping 125mm
1 x	Dial gauge
1 x	Cutter head for copy and surface milling MT3
1 x	3-jaw chuck centrically clamping 100mm
1 x	Polishing felt, medium hard
1 x	Cutter head for copy and surface milling MT2
1 x	3-jaw chuck centrically clamping 160mm
1 x	CM2 - B16 - M10
1 x	3-jaw chuck centrically clamping 80mm
1 x	Precision quick-action drill chuck 0-13mm B16

€6,375.37