Top » Catalog » Drilling-milling machine » End mill » 3350212

€198.00 + VAT

Cutter head for copy and surface milling MT2
[3350212]

Cutter head for copy and surface milling “Made in Germany”

Universal insert to treat all steel and NE metals
For surface and copy milling
Made of special steel - highly coated
High surface and concentricity accuracy
Milling body with offset division for very smooth running and constant cutting
Base body and clamping shank form a unit, thus short projection length and stable tension
No additional milling plug-in mandrel is being used
Special geometry for milling at high speed
Economical, because the plate can be further turned with blunt cutter (can be used up to 12 times)
Incl. 5 indexable inserts RDET 1003 MOSN 8026 · Torx TX15

Technical data - MT 2
Number of cutters - 5
Outside diameter - 52 mm
Seat shaft - MT2/M10
Indexable inserts - Ø 10 mm
ISO designation - RDX. 1003 D52/R5

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
  End mill
  End miller cutter->
  Optimum Drilling-milling machine
  Optimum-Quantum accessories->
  Proxxon Drilling-milling machine
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Safety Insulated Phillips Screwdriver 14-634VDE
2 x	CM2 - B16 - M10
1 x	Morse taper MT2 - B16
2 x	V-slot cutter 6.5mm
2 x	Slot cutter 6.5mm
2 x	Rounding over cutter 6.4mm
2 x	Half round cutter 13mm
1 x	Morse taper MT3 - B16
2 x	Core box bit 3.2mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	Cutting tool 16 mm
1 x	3-jaw chuck centrically clamping 125mm
2 x	Cutter head for copy and surface milling MT3
2 x	Digital caliper gauge 300 mm
2 x	Dial gauge
1 x	centrically clamping 100mm
1 x	4-jaw chuck individually clamping 80mm
1 x	DCMT070204
1 x	Cutting tool 10 mm
1 x	Cutting tool HM 20 mm
1 x	End milling cutter kit HSS 12 pcs
1 x	3-jaw chuck centrically clamping 100mm
1 x	3-jaw chuck centrically clamping 80mm
1 x	4-jaw chuck individually clamping 125mm
1 x	Cutting tool 8 mm
1 x	centrically clamping 125mm
1 x	sandpaper for PS 13 Grot 180
1 x	10-piece wood router cutter set
1 x	Combi cutter 6.5/2.5mm
1 x	Rebating cutter 6.4mm
1 x	Angle cutter 45 °
1 x	Slot cutter 3.2mm
1 x	Edge cutter with pin 6.4mm
2 x	Screwdriver bit set. 49-piece.
2 x	sandpaper for PS 13 Grit 240
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Corundum fan sander for LWS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Blade holders for DS 460
1 x	Corundum fan sander for LWS
1 x	Steel tape measure
1 x	FLUX DISPENSING PEN, LEAD FREE
2 x	Coarse-toothed (25 TPI per 25mm)
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	Tungsten Carbide Tipped (TCT)
1 x	Corundum bound cutting disc for LWS
1 x	Sanding fleece for LWS
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Magnetic base
1 x	Fine dust paper filter for CW-matic
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Tungstein carbide rasp - and cutting disc
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Sanding fleece for LWS
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Corundum sanding discs for LWS
1 x	Precision magnetic gauge stand
1 x	Backing disc for LWS
1 x	MICRO Miller FF 500
1 x	Diamond-coated cutting and roughing disc
1 x	Corundum grinding disc for LWS
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	magnetic base 80kg
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Fluted filter for CW-matic
1 x	Corundum sanding discs for LWS
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	TU 2404
1 x	Cutting disc, with reinforcement
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	sandpaper for PS 13 Grit 400
1 x	Vacum SAA 901
1 x	Crosscut 'Super-Cut' blade
1 x	Diamond-coated cutting disc for MIC
1 x	Saw blade made of high-alloy special steel
1 x	End milling cutter kit HSS 20 pcs
1 x	Tungsten carbide cutters set
1 x	Super safety and specialty bit set, 75-piece
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Milling cutter set (2 - 5mm)
1 x	Milling cutter set (6 - 10mm)
1 x	Diamond blade

€7,370.58