Top » Catalog » Lathes » Optimum Lathes » 3420310

€1,400.00 + VAT

TU 2004V
[3420310]

Convincing arguments: quality, efficiency and price

  • Stepless spindle speeds from 150 to 1,250 rpm and 300 to 2,500 rpm
  • Main spindle hardened and bedded in readjustable precision taper roller bearings
  • Hardened spindle nose (DIN 6350)
  • The tailstock may be shifted +/- 2.5 mm for taper turning
  • Wide threading range due to change gear kit
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Induction-hardened and ground prismatic bed made from cast iron
  • All guideways adjustable without clearance due to adjustable gibs
  • Powerful, maintenance-free motor
  • Right and left hand motion with zero adjustment
  • Manufactured to DIN 8606 (toolmaker´s precision)
  • Cost-efficient, precise and of stable value
     

  • Main spindle hardened and bedded in adjustable precision taper roller bearings
  • Taper roller bearings in P5 quality
  • Cylindrical centring consumption, hardened spindle noose with a spindle hole of 21 mm
  • Change gear mechanism
  • Continuous speed control

  • Precision-machined slide
  • Handwheels with adjustable precision scaling
  • Quadruple tool holder
  • All guideways adjustable without clearance due to adjustable gibs
  • Rolled trapezoid spindle


  • Tailstock adjustable for taper turning
  • Tailstock sleeve and handwheel with adjustable precision scaling


  • Induction-hardened solid prismatic bed

 

Extent of supply:

  • 3-jaw chuck Ø 80 mm
  • Steady centre MT 2
  • Steady centre MT 3
  • Lathe chuck protection
  • Rear splash guard
  • Chip pan
  • Quadruple tool holder
  • Operating tools
  • Change gear kit

Technical data 
Motor power 600 W 230 V ~50 Hz
Center height 100 mm
Center width 300 mm
Turning diameter (max.) 200 mm
Ø circulation via slide 110 mm
Spindle speed 150 - 2,500 rpm
Number of steps 2 steps
Spindle taper  MT 3
Spindle hole 21 mm
Passage 3-jaw chuck 20 mm 
Bed width 100 mm
Top slide - travel 55 mm
Compound slide - travel 75 mm
Tailstock taper MT 2
Tailstock sleeve travel 65 mm
Longitudinal feed 0.1/0.2 mm/rev
Pitch - Metric (11) 0.5 - 3 mm/rev
Pitch - Inch (8) 44 - 10 threads/1“
Quadruple tool holder Seat height . 12 mm
Dimensions (L x W x H) 830 x 396 x 355 mm
Net weight 55 kg

 

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Disc Sander TG 125/E
1 x Professional Drill/Grinder IBS/E
1 x sandpaper for PS 13 Grit 400
1 x Broca de ponto 3.15 x 1.00
2 x Broca de alta duração de 2.5mm
2 x 3-jaw chuck centrically clamping 160mm
2 x Cutting tool 10 mm
1 x Replacement carving blades for MSG
1 x Broca de alta duração de 1.3mm
2 x 3-jaw chuck centrically clamping 80mm
1 x Router base OFV
1 x Multiform grindstone
2 x Cutting tool HM 20 mm
2 x Cutter head for copy and surface milling MT2
2 x Cutting tool 8 mm
1 x TCMT110204
2 x 4-jaw chuck individually clamping 80mm
2 x 4-jaw chuck individually clamping 125mm
1 x Dial gauge
1 x MICRO Miller FF 500
2 x Broca de alta duração de 1.0mm
2 x 3-jaw chuck centrically clamping 125mm
2 x precision machine vices FMS100
1 x TCMT090204
1 x End milling cutter kit HSS 12 pcs
1 x MICROMOT 50/EF
2 x lathe tools 12mm
2 x SCMT060204
2 x Broca de alta duração de 1.1mm
2 x SCMT09T304
1 x WCMT050308
1 x Super-Cut
1 x Morse taper MT3 - B16
1 x Precision quick-action drill chuck 0-13mm B16
2 x Precision quick-action drill chuck 0-16mm B16
1 x Morse taper MT2 - B16
1 x Polishing felt, medium hard
2 x Precision magnetic gauge stand
1 x Precision quick-action drill chuck 0-10mm B16
1 x Table Saw FET
1 x Crosscut 'Super-Cut' blade
1 x Precision quick-action drill chuck 0-10mm B16
3 x broca de alta duração de 0,6mm
1 x Mill/Drill System BFW 40/E
2 x Precision quick-action drill chuck 0-8mm B16
1 x Three jaw chuck for the lathe DB 250
1 x DIL32/SOIC32 ZIF 445mil
1 x Angle cutter 45 °
1 x DIL3/SOT23-3 ZIF-CS
1 x Coarse-toothed (10 TPI per 25mm)
1 x DIL48/SOIC20 ZIF LPC-1
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x DIL24W/SOIC24 ZIF 300mil
1 x DIL8/SOIC8 ZIF 200mil
1 x Spiral blade. 125mm long with plain ends (without pins).
2 x High quality corundum grinding bits
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Coarse-toothed (18 TPI per 25mm)
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Band knife of hardened spring band steel (without teeth)
2 x Sanding bands 14x13mm
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x DIL20/SOIC20 ZIF 200mil
1 x DIL8W/SOIC8 ZIF 150mil
1 x DIL8W/SOIC8 ZIF 200mil
1 x DIL28W/SOIC28 ZIF 300mil
1 x Coarse-toothed (25 TPI per 25mm)
1 x DIL8/SOIC8-1 ZIF 170mil
2 x High quality corundum grinding bits
1 x Bottom PSOP44 NOR-2
1 x Bottom PSOP44 NOR-3
1 x DIL8/SOIC8 ZIF MB95-1
1 x DIL16W/SOIC16 ZIF 150mil
1 x Bottom PSOP44 NOR-1
1 x DIL48/PLCC52 ZIF-CS 68HC05BX
1 x Bench drill machine TBM 220
1 x Angle polisher WP/E
1 x DIL16/SOIC16-1 ZIF 170mil
1 x DIL40/SOIC16 ZIF MB-1
1 x Top PSOP44 ZIF 600mil
1 x DIL48/PLCC84 ZIF 68HC11
2 x lathe tools 8mm
1 x DIL18W/SOIC18 ZIF 300mil
1 x DIL48/SOIC24 ZIF MB95-1
1 x DIL28/PLCC84 ZIF HS538ESC01H
1 x DIL48/PLCC52 ZIF-CS 68HC11
1 x DIL20W/SOIC20 ZIF 300mil
1 x Super safety and specialty bit set, 75-piece
1 x DIL16W/SOIC16 ZIF 300mil
1 x BGA-Bottom-88
1 x Diamond Coated
1 x DIL14W/SOIC14 ZIF 150mil
1 x DIL40/SOIC20 ZIF MB95-1
2 x Fibre-Cut Discs
1 x Silicon-Carbide.
1 x Conjunto de três brocas de ponto
1 x HSS twist drill set with centring pin
1 x Flap Wheels
1 x HSS drill bits 1.0mm
1 x MICRO Miller FF 230
1 x HSS twist drill set to DIN 338
1 x HSS drill bits 1.6mm
2 x Fibre-Cut Discs
2 x High quality corundum grinding bits
1 x surface planing and thicknessing ADH 200
2 x Fibre-Cut Discs
1 x High quality corundum grinding bits
2 x Flexible silicon discs
1 x Insert CCGT060202-AK
1 x Long neck straight drill/grinder LB/E
2 x Felt polishers
1 x Tungsten carbide drills Ø1,5mm
1 x Complete Engraving Kit with trial glass
2 x Cotton polishers
2 x Cotton polishers
1 x HSS drill bits 1.2mm
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x Diamond Cutting Discs
2 x Insert CCGT120404-AK
1 x Sanding Discs
1 x HSS drill bits 0.5mm
1 x Sanding Drums
2 x Cotton polishers
2 x Steel brushes
2 x High quality corundum grinding bits
1 x Wood Lathe DB450
1 x Tungsten carbide drills Ø2mm
2 x Lathe tools 8mm pastilhados
2 x Felt polishers
1 x Broca de alta duração de 1.4mm
1 x Nylon Fleece Brushes
2 x lathe tools 10mm
1 x Sanding bands 14x13mm
2 x Fibre-Cut Discs
1 x MICROMOT steel collet set
1 x Broca de alta duração de 2.2mm
1 x Long neck angle grinder LHW
2 x BIT-SET
1 x DCGT 070202F-AL
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x High quality corundum grinding bits
1 x Sanding Drums
1 x Lathe System PD 400
1 x Three-jaw steel drill chuck
1 x Multipurpose Vices Primus 75
1 x Sanding Discs
1 x Fine dust paper filter for CW-matic
1 x Step clamps made of steel
1 x Flap Wheels
2 x Flexible polishing pad set
2 x High quality corundum grinding bits
2 x Metal Cutting Blades
1 x HSS drill bits 0.8mm
2 x Diamond Cutting Discs
1 x High quality corundum grinding bits
1 x Sanding Drums
1 x Tungsten carbide drills Ø1mm
1 x Protective device for hand-operated MICROMOT
2 x Felt polishers
1 x MICROMOT 50
1 x Solid carbide saw blade
2 x Stainless steel brushes
2 x Stainless steel cups
1 x Boring Bar for DCMT 10mm
1 x Grinding mop cylinder grit 120
1 x Boring Bar for CCMT 8mm
1 x Boring Bar for CCMT 16mm
2 x Wheels brushes
1 x Grinding mop cylinder grit 120
1 x Grinding mop cylinder grit 80
2 x Polishing paste
1 x Boring Bar for CCMT
1 x Fibre-Cut Discs
1 x Tungsten carbide cutters set
1 x Spare cutting wire
1 x Diamond Cutting Discs
2 x Stainless steel wheels
1 x Tungstein carbide rasp - and cutting disc
1 x sclcr2525M12
1 x Professional set for finish grinding and polishing
2 x Steel wheels
1 x Fibre-Cut Discs
1 x Pensander PS 13
2 x Tungsten carbide cutter 2.0mm
1 x Flexible silicon discs
1 x Super-fine sanding discs grain 000
1 x Grinding mop cylinder grit 240
1 x Corundum fan sander for LWS
1 x Flexible polishing pad set
2 x Steel cups
1 x Broca de alta duração de 0.7mm
1 x Broca de alta duração de 1.2mm
2 x Cups brushes
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Cutting tool 16 mm
1 x Diamond Cutting Discs
1 x Lathe tools 10mm pastilhados
1 x Compact workshop vacuum cleaner CW-matic
1 x Diamond-coated cutting and roughing disc
1 x SCLCR1010E06
2 x Brass brushes
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Felt polishers
1 x RT150 - Horizontal-vertical circular dividing table
1 x Centre Turning Attachment
2 x Collet Set for accurate use on round components
1 x Fixed Steady
1 x OPTI BF16 Vario
1 x IT 150 - Indirect dividing attachment
1 x quantum revolving center CM1
1 x Gear Chuck
1 x Cylinder shaped milling cutters
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x End milling cutter kit HSS 20 pcs
1 x Table Saw TKS 2500 SC
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x Four Jaw Chuck
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
€20,961.12
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
- Other products
What's New?
Grinding mop cylinder grit 120
Grinding mop cylinder grit 120
€8.33
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online