Top » Catalog » Lathes » Optimum Lathes » 3420310

€1,400.00 + VAT

TU 2004V
[3420310]

Convincing arguments: quality, efficiency and price

  • Stepless spindle speeds from 150 to 1,250 rpm and 300 to 2,500 rpm
  • Main spindle hardened and bedded in readjustable precision taper roller bearings
  • Hardened spindle nose (DIN 6350)
  • The tailstock may be shifted +/- 2.5 mm for taper turning
  • Wide threading range due to change gear kit
  • Taper roller bearings in P5 quality
  • Rolled trapezoid spindle
  • Thrust bearing
  • Leadscrew run on two porous bearings
  • Leadscrew for threading or automatic longitudinal feed
  • Induction-hardened and ground prismatic bed made from cast iron
  • All guideways adjustable without clearance due to adjustable gibs
  • Powerful, maintenance-free motor
  • Right and left hand motion with zero adjustment
  • Manufactured to DIN 8606 (toolmaker´s precision)
  • Cost-efficient, precise and of stable value
     

  • Main spindle hardened and bedded in adjustable precision taper roller bearings
  • Taper roller bearings in P5 quality
  • Cylindrical centring consumption, hardened spindle noose with a spindle hole of 21 mm
  • Change gear mechanism
  • Continuous speed control

  • Precision-machined slide
  • Handwheels with adjustable precision scaling
  • Quadruple tool holder
  • All guideways adjustable without clearance due to adjustable gibs
  • Rolled trapezoid spindle


  • Tailstock adjustable for taper turning
  • Tailstock sleeve and handwheel with adjustable precision scaling


  • Induction-hardened solid prismatic bed

 

Extent of supply:

  • 3-jaw chuck Ø 80 mm
  • Steady centre MT 2
  • Steady centre MT 3
  • Lathe chuck protection
  • Rear splash guard
  • Chip pan
  • Quadruple tool holder
  • Operating tools
  • Change gear kit

Technical data 
Motor power 600 W 230 V ~50 Hz
Center height 100 mm
Center width 300 mm
Turning diameter (max.) 200 mm
Ø circulation via slide 110 mm
Spindle speed 150 - 2,500 rpm
Number of steps 2 steps
Spindle taper  MT 3
Spindle hole 21 mm
Passage 3-jaw chuck 20 mm 
Bed width 100 mm
Top slide - travel 55 mm
Compound slide - travel 75 mm
Tailstock taper MT 2
Tailstock sleeve travel 65 mm
Longitudinal feed 0.1/0.2 mm/rev
Pitch - Metric (11) 0.5 - 3 mm/rev
Pitch - Inch (8) 44 - 10 threads/1“
Quadruple tool holder Seat height . 12 mm
Dimensions (L x W x H) 830 x 396 x 355 mm
Net weight 55 kg

 

Reviews
Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x surface planing and thicknessing ADH 250
1 x Slot cutter 6.5mm
1 x Rounding over cutter 6.4mm
2 x Glass fibre contact cleaner brush
2 x V-slot cutter 6.5mm
2 x VASELINE 200ml
2 x Replacement carving blades for MSG
1 x Slot cutter 3.2mm
1 x Slot cutter 5.0mm
1 x Diamond blade
3 x Angle cutter 45 °
2 x CD-CLEANER 200ml
1 x Solid carbide saw blade
2 x POLISHER 200ml
2 x TOP-PIN 200ml
2 x MULTI 200ml
1 x Wood Lathe DB900
2 x VIDEOCLEAN 200ml
2 x SCREEN 200ml
1 x DEGRESER 200ml
2 x PROTECTION 200ml
2 x SILICONE 200ml
2 x ANTISTATIC 200ml
1 x Edge cutter with pin 6.4mm
1 x PROLUB 200ml
1 x ESD-handling ser 9-361
2 x HSS drill bits 0.5mm
1 x Screwdriver bit set. 49-piece.
2 x High quality corundum grinding bits
2 x Tungsten carbide drills Ø2mm
1 x Combination pliers 205mm
3 x Tungsten carbide drills Ø1mm
1 x Lever Dial Indicator
1 x Sanding Drums
1 x Diamond Twist Drills
2 x HSS drill bits 0.8mm
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x Nylon Fleece Brushes
1 x magnifier 3.25 x Ø 45mm with additional lens
2 x Footswitch FS
2 x 14-piece parallel supports set
2 x Cutting disc, with reinforcement
1 x Sanding Discs
1 x Tungsten carbide drills Ø1,5mm
1 x Sanding Drums
1 x SPRAYOIL 200ml
2 x HSS drill bits 1.0mm
2 x Spare cutting wire
1 x Sanding bands 14x13mm
1 x Angle polisher WP/E
2 x FREEZER-TOP 200ml
2 x HSS drill bits 1.2mm
1 x Steel brushes
1 x 
1 x Telephon pliers straight 160mm
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Telephon pliers straight 200mm
2 x Compact workshop vacuum cleaner CW-matic
2 x MICROMOT extension cord. 300cm.
1 x Three jaw chuck for the lathe DB 250
1 x Sanding pads for OZI 220/E grit 240
1 x Flap Wheels
2 x Independent four jaw chuck for the DB 250
1 x Plastic magnifying glass
1 x Lathe System PD 400
1 x Felt cloth polishing disc (100 x 15mm)
2 x Wolfram vanadium steel milling bits
1 x Step clamps made of steel
1 x Engraving tool GG
1 x Sanding pads for OZI 220/E grit 150
1 x Precision Vice FMS 75
2 x Chuck for TBM 220
1 x Three piece thread cutting set
1 x Combination pliers 160mm
1 x Fluted filter for CW-matic
1 x Flat nose pliers 160mm
1 x Wire strippers 160mm
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Stainless steel cups
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Router base OFV
1 x Cotton polishers
1 x MICROFLAM gas soldering set MGS
1 x MICROMOT 50
1 x Precision lathe PD 250/E
4 x Centre Turning Attachment
1 x Telephon pliers bent 160mm
2 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
3 x Ball shaped milling cutters
1 x Precision Vice FMZ
1 x Side cutters 160mm
3 x Fixed Steady
2 x Brass brushes
2 x Long neck angle milling/drilling unit LWB 220/E
1 x Pensander PS 13
2 x Radius Cutting Attachment, complete with pointed tool
1 x Mill/Drill System BFW 40/E
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Bench drill press TBH
1 x Multipurpose Vices Primus 75
1 x Cups brushes
2 x MICRO Miller FF 500
2 x Four Jaw Chuck
1 x Replacement glue sticks for HKP 220
2 x Cutting tools of high quality cobalt HSS steel, ground
2 x Crimping plier for BNC
1 x Floor cover ESD
2 x MICRO Miller MF 70
3 x Set of special steel cutters
1 x High quality corundum grinding bits
2 x HSS twist drill set with centring pin
2 x Combination pliers 185mm
1 x High quality corundum grinding bits
3 x Tungsten carbide cutters set
2 x Combi cutter 6.5/2.5mm
1 x Coarse-toothed (18 TPI per 25mm)
1 x Blade for Wood and Plastics
1 x Fibre-Cut Discs
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Machine Vice MS 4
1 x MICROMOT drill stand MB 200
2 x Micro Compound Table KT 70
1 x Milling cutter set (6 - 10mm)
1 x Wire strippers 165mm
1 x Five piece HSS chisel set
1 x Protective device for hand-operated MICROMOT
1 x Blade guides separately
1 x Mill/Drill Unit BFB 2000.
1 x Blade holders for DS 460
1 x Wire strippers 160mm
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Fibre-Cut Discs
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Tungsten carbide cutter 1.0mm
1 x Side cutters 160mm
1 x Metal Cutting Blades
1 x Professional polishing sponge
1 x Antiallergical Tweezers 5-117-1
1 x Three-jaw steel drill chuck
1 x Aluminium Die-Cast
2 x Cylindrical cutters
1 x Coarse-toothed (25 TPI per 25mm)
1 x Flexible polishing pad set
2 x High quality corundum grinding bits
1 x Super-fine sanding discs grain 400
1 x Fibre-Cut Discs
2 x High quality corundum grinding bits
1 x Professional set for finish grinding and polishing
3 x Flame shaped milling cutters
1 x Flexible polishing pad set
1 x Telephone pliers straight 205mm
1 x Telephone pliers stright 205mm
1 x MICRO Heat gun MH 550
2 x Solid carbide stylus for engraving
1 x Fibre-Cut Discs
1 x Side cutters 170mm
1 x Super-fine sanding discs grain 2000
1 x Telephone pliers bent 205mm
2 x Tungsten carbide cutter 3.0mm
1 x Flexishaft MICROMOT 110/P
2 x Super-fine sanding discs grain 000
1 x Tool holder for rotary tools
2 x MICROMOT steel collet set
1 x Flat nose pliers 185mm
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Cylinder shaped milling cutters
1 x Complete Engraving Kit with trial glass
1 x High quality corundum grinding bits
1 x Set of precision cutters
1 x MICRO shaper MP 400
1 x Gear Chuck
1 x MICROMOT tool holder
1 x Microfibre cloth
1 x Backing disc for LWS
1 x Round nose pliers 185mm
1 x Jig saw blades made of HSS
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x MICRO Band Saw MBS 240/E
1 x Jig saw STS 12/E
1 x TORX-screwdrivers T20
1 x TORX-screwdrivers T10
2 x ESD Tweezers 5-192
1 x ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x TORX-screwdrivers T15
2 x ESD Tweezers 5-191
2 x TORX-screwdrivers T9
1 x TORX-screwdrivers T10
2 x Conj 5 pinças ESD
2 x 6-piece set of ESD/EGB tweezers
1 x Wrench Keys 0.7
1 x Wolfram vanadium steel milling bits
1 x Cone shaped milling cutter
1 x Wrench Keys 0.9
1 x ESD Brushe
2 x ESD Tweezers 5-194
2 x ESD Tweezers 5-195
2 x Disc cutters
3 x Ceramic-tipped tweezers and ESD 5-095
1 x Contact bracelet with spiral cord
1 x Combination pliers 190mm
1 x Wrench Keys 1.5
2 x Ceramic-tipped tweezers and ESD 5-096
2 x ESD Tweezers 5-193
1 x Wrench Keys 2.5
1 x Wrench Keys 1.3
1 x Wrench Keys 2.0
1 x SMD Tweezers 5-054
1 x SMD Tweezers 5-061
2 x SMD Tweezers 5-052
1 x SMD Tweezers 5-075
1 x TU 2404
1 x Component tweezers 5-006
1 x Antiallergical Tweezers 5-121-1
1 x SMD Tweezers 5-053
1 x TU 1503V
1 x SMD Tweezers 5-062
2 x SMD Tweezers 5-051
1 x SMD Tweezers 5-071
€18,779.62
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
Optimum
- Other products
What's New?
Grinding mop cylinder grit 80
Grinding mop cylinder grit 80
€8.33
Languages
Portugues English
Share Product
Share on Facebook

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online