Convincing arguments: quality, efficiency and price
- Stepless spindle speeds from 150 to 1,250 rpm and 300 to 2,500 rpm
- Main spindle hardened and bedded in readjustable precision taper roller bearings
- Hardened spindle nose (DIN 6350)
- The tailstock may be shifted +/- 2.5 mm for taper turning
- Wide threading range due to change gear kit
- Taper roller bearings in P5 quality
- Rolled trapezoid spindle
- Thrust bearing
- Leadscrew run on two porous bearings
- Leadscrew for threading or automatic longitudinal feed
- Induction-hardened and ground prismatic bed made from cast iron
- All guideways adjustable without clearance due to adjustable gibs
- Powerful, maintenance-free motor
- Right and left hand motion with zero adjustment
- Manufactured to DIN 8606 (toolmaker´s precision)
- Cost-efficient, precise and of stable value
- Main spindle hardened and bedded in adjustable precision taper roller bearings
- Taper roller bearings in P5 quality
- Cylindrical centring consumption, hardened spindle noose with a spindle hole of 21 mm
- Change gear mechanism
- Continuous speed control
- Precision-machined slide
- Handwheels with adjustable precision scaling
- Quadruple tool holder
- All guideways adjustable without clearance due to adjustable gibs
- Rolled trapezoid spindle
- Tailstock adjustable for taper turning
- Tailstock sleeve and handwheel with adjustable precision scaling
- Induction-hardened solid prismatic bed
Extent of supply:
- 3-jaw chuck Ø 80 mm
- Steady centre MT 2
- Steady centre MT 3
- Lathe chuck protection
- Rear splash guard
- Chip pan
- Quadruple tool holder
- Operating tools
- Change gear kit
| Technical data |
| Motor power |
600 W 230 V ~50 Hz |
| Center height |
100 mm |
| Center width |
300 mm |
| Turning diameter (max.) 200 mm |
|
| Ø circulation via slide |
110 mm |
| Spindle speed |
150 - 2,500 rpm |
| Number of steps |
2 steps |
| Spindle taper |
MT 3 |
| Spindle hole |
21 mm |
| Passage 3-jaw chuck 20 mm |
|
| Bed width |
100 mm |
| Top slide - travel |
55 mm |
| Compound slide - travel |
75 mm |
| Tailstock taper |
MT 2 |
| Tailstock sleeve travel |
65 mm |
| Longitudinal feed |
0.1/0.2 mm/rev |
| Pitch - Metric (11) |
0.5 - 3 mm/rev |
| Pitch - Inch (8) 44 - |
10 threads/1“ |
| Quadruple tool holder Seat height . |
12 mm |
| Dimensions (L x W x H) |
830 x 396 x 355 mm |
| Net weight |
55 kg |
