Top » Catalog » Lathes » Proxxon Lathes » 24002

€1,060.00 + VAT

Precision lathe PD 250/E
[24002]

Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance 250mm. Swing 70mm. Height over cross slide 46mm. Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Precision Vice FMS 75
1 x	Precision Vice FMZ
5 x	Machine Vice MS 4
1 x	Multipurpose Vices Primus 75
1 x	Table Saw FET
2 x	Precision caliper square
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	EUROline top cutter
1 x	Telephon pliers straight 200mm
2 x	Diamond Cutting Discs
1 x	BIT-SET
1 x	Diamond Grinding Bits 1mm
1 x	Dividing attachment TA 230 for PF 250
1 x	Cut off/mitre saw KGS 80
1 x	Blade guides separately
1 x	Mini side cutters EUROline-Conductive
1 x	MICROMOT steel collet set
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
3 x	Precision steel vice PM 40
1 x	Aluminium Die-Cast
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
1 x	Scroll saw DS 230/E
1 x	Crimping plier for BNC
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Telephone pliers straight 205mm
1 x	EUROline flat nose pliers
1 x	V-slot cutter 6.5mm
1 x	Telephon pliers straight 160mm
1 x	Blade for Steel and brass
1 x	Three-jaw steel drill chuck
1 x	MICRO cutter MIC
2 x	Blade holders for DS 460
2 x	Tungsten carbide cutters set
1 x	Grinding mop cylinder grit 80
1 x	Stainless steel wheels
1 x	MICRO Band Saw MBS 240/E
1 x	Mill/Drill Unit BFB 2000.
1 x	Wheels brushes
2 x	Diamond Cutting Discs
1 x	Round nose pliers 185mm
1 x	Plastic magnifying glass
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Round nose pliers 160mm
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	Hot wire cutter THERMOCUT 650
2 x	Edge cutter with pin 6.4mm
2 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Super jig saw STS/E
1 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	Slot cutter 5.0mm
1 x	PLCC Extractor
2 x	Grinding mop cylinder grit 120
1 x	Table Saw TKS 2500 SC
2 x	Flat nose pliers 165mm
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	MICRO woodturning lathe DB 250
1 x	Grinding mop cylinder grit 240
1 x	Telephon pliers bent 200mm
4 x	Grinding mop cylinder grit 120
1 x	Telephon pliers bent 160mm
1 x	Telephone pliers bent 205mm
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
2 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	Slot cutter 3.2mm
1 x	Fine dust paper filter for CW-matic
1 x	Hot wire cutter THERMOCUT 12/E
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Slot cutter 6.5mm
1 x	Diamond Grinding Bits 1,8mm
1 x	EUROline round nose pliers
1 x	Protective device for hand-operated MICROMOT
3 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Thicknesser DH 40
2 x	Flat nose pliers 160mm
2 x	Core box bit 3.2mm
1 x	10-piece wood router cutter set
1 x	Steel wheels
1 x	Ball-shaped diamond coated 1.2mm
2 x	Combi cutter 6.5/2.5mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Footswitch FS
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Step clamps made of steel
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	PVC-insulated tweezers 5-117-6
1 x	Flexishaft MICROMOT 110/P
3 x	Telephone pliers bent 205mm
1 x	Bench Circular Saw KS 230
2 x	Flat nose pliers 185mm
1 x	Cups brushes
1 x	PRECISION WIRE STRIPPER ESD-PLUS
2 x	Half round cutter 13mm
1 x	Telephone pliers bent 165mm
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Micro Compound Table KT 70
1 x	Rounding over cutter 6.4mm
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Brass brushes
1 x	PLCC Puller
1 x	Stainless steel cups
2 x	Coarse-toothed (10 TPI per 25mm)
1 x	EUROline side cutter rounded head
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	Blade for Wood and Plastics
1 x	Round nose pliers 165mm
1 x	Angle cutter 45 °
1 x	sclcr2525M12
3 x	Polishing felt, medium hard
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Fibre-Cut Discs
1 x	Inspector mirror
2 x	Professional polishing sponge
2 x	Backing disc for LWS
1 x	SPRAYFLON 200ml
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Wood Lathe DB900
1 x	Metal Cutting Blades
1 x	Diamond Cutting Discs
1 x	DIL44/MLF44-1 ZIF-CS
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Boring Bar for CCMT
2 x	Super-fine sanding discs grain 2000
1 x	SILICONE 200ml
1 x	Hand Magnifier 2-293
1 x	Dial gauge
1 x	Floor cover ESD
1 x	Boring Bar for CCMT 16mm
1 x	Five piece HSS chisel set
2 x	Super-fine sanding discs grain 400
1 x	Three jaw chuck for the lathe DB 250
1 x	MICRO shaper MP 400
1 x	Independent four jaw chuck for the DB 250
2 x	Super-fine sanding discs grain 000
1 x	Fibre-Cut Discs
1 x	SCLCR1010E06
1 x	ESD-handling ser 9-361
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Precision lathe PD 250/E
1 x	MULTI 200ml
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	Fibre-Cut Discs
2 x	Lambswool polishing disc
1 x	Handy 1515
3 x	Microfibre cloth
1 x	PROTECTION 200ml
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Inpection mirror 1-978
1 x	VASELINE 200ml
1 x	Fibre-Cut Discs
1 x	Cylinder sander WAS/E
1 x	6-piece TORX-screwdriver-set ESD
1 x	surface planing and thicknessing ADH 250
1 x	Mini side cutters EUROline-Conductive
3 x	Professional set for finish grinding and polishing
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	PROLUB 200ml
1 x	Fibre-Cut Discs
1 x	Glass fibre contact cleaner brush
1 x	DIL8/SOT23-6 ZIF-CS PIC
1 x	Lathe System PD 400
1 x	Fibre-Cut Discs
1 x	DIL32/MLF32-1 ZIF
1 x	Jig saw STS 12/E
1 x	Boring Bar for DCMT 10mm
1 x	6-piece wrench key set ESD
1 x	EUROline-Conductive set of pliers
1 x	surface planing and thicknessing ADH 200

€14,251.02