€295.00 + VAT

Insulation Resistance Tester MG500
[MG500]

Insulation Resistance Tester MG500

Allows you to measure insulation resistance more safely by avoiding operation mistakes!!

Hot-line state detection
In any range (MΩ), the hot-line state (30 V minimum) can be detected through the buzzer sound and the red LED illumination. If you press the MEASURE button by mistake in this state, no test voltage will be generated. Thus, the measuring circuit and the equipment involved will not be affected adversely.

Large bolt mark
During the measurement of MΩ, a large bolt mark is illuminated on the LCD with the buzzer sound, allowing you to find that voltage is generated.

More ingenuity
To select the highest test voltage range, you need to turn the rotary switch while holding down the 0Ω ADJ button. This design feature prevents the highest test voltage from being generated by an operation mistake.

Easy to use & tough body
An easy-to-hold body with a portrait design has been adopted to ensure stable measurements. The tester comes with a strap, and uses less slippery elastomeric material for its lateral sides so that the user can grip the tester more firmly.

Automatic data hold
After measurements have been finished, the last measured value can be held automatically. Unlike an analog tester, you do not need to check the reading during measurements and therefore can comfortably concentrate on the object under measurement.

Bargraph just like analog meter
A large logarithmic bar graph is provided to enable the user to check the measured value like using an analog tester.

Large display with backlight
The backlight allows you to check the measured value even in a dark place. Since the rated voltage output can be checked with the green LED, you can find whether the measurement is being carried out properly.

General Specification

MG500 


Reviews
Manufacturers
1 x Dial gauge
1 x Precision magnetic gauge stand
1 x Lathe chuck flange for D250X550
1 x Steady rest for D250X550
1 x Contact bracelet with spiral cord
1 x Earth wire
1 x Earthing module
1 x Lathe tools 10mm pastilhados
1 x centrically clamping 125mm
1 x Earth wire with dummy Schunko-plug
1 x Tool holder type D for SWH 1-A
1 x Earth wire
3 x Insulation Resistance Tester MG125
1 x ESD-handling ser 9-361
1 x Collet chuck ER32 for D250X550
1 x 3-jaw chuck centrically clamping 125mm
1 x magnetic base 80kg
1 x Tool holder type H for SWH 1-A
1 x Follow rest for D250X550
1 x Quick-action tool holder kit SWH AA
1 x 4-jaw chuck individually clamping 125mm
1 x Morse taper MT2 - B16
1 x machine base with shelves for D250X550
1 x lathe tools 10mm
1 x Crocodile clip
1 x Cutting tool 10 mm
1 x Face clamping disc for D250X550
1 x Precision quick-action drill chuck 0-10mm B16
1 x quantum revolving center CM2
1 x Collet chuck ER25 for D250X550
1 x Precision quick-action drill chuck 0-13mm B16
1 x ESD-handling set
1 x HSS boring tool set, 6 pieces
1 x Super safety and specialty bit set, 75-piece
1 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x Universal and oil siphoning pump AP 12
3 x Brass contact cleaner brush
1 x TU 1503V
1 x Router base OFV
1 x TU 2404
1 x surface planing and thicknessing ADH 200
3 x Glass fibre contact cleaner brush
1 x Three piece thread cutting set
2 x Lathe System PD 400
1 x MICROFLAME burner MFB/E
3 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x surface planing and thicknessing ADH 250
1 x Universal holder UHZ
1 x TU 2004V
1 x MICROMOT glue gun HKP 220
1 x MICRO Heat gun MH 550
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x MICRO-screwdrivers
2 x Glass fibre contact cleaner brush
1 x Engraving tool GG
1 x Compact workshop vacuum cleaner CW-matic
1 x MICROFLAM gas soldering set MGS
2 x Precision lathe PD 250/E
1 x Complete Engraving Kit with trial glass
1 x Screwdriver bit set. 49-piece.
1 x Broca de alta duração de 1.3mm
1 x MICRO Miller MF 70
1 x Broca de alta duração de 2.4mm
1 x Precision drill grinder FBS 12/EF
1 x Plastic magnifying glass
1 x Broca de alta duração de 2.5mm
1 x Broca de ponto 3.15 x 1.25
1 x Broca de alta duração de 2.3mm
1 x MICRO Miller FF 500
1 x Jig saw STS 12/E
1 x ESD Brushe
1 x Long neck straight drill/grinder LB/E
1 x 2-speed scroll saw DSH
1 x MICRO cutter MIC
1 x Bench Circular Saw KS 230
1 x Cut off/mitre saw KGS 80
1 x Broca de alta duração de 2.1mm
1 x Thicknesser DH 40
1 x Broca de alta duração de 1.0mm
1 x Bench drill press TBH
1 x Broca de alta duração de 1.2mm
1 x MICROMOT 50
1 x broca de alta duração de 0,6mm
1 x Scroll saw DS 230/E
1 x Broca de alta duração de 1.5mm
1 x Broca de alta duração de 0.7mm
1 x Bench drill machine TBM 220
1 x Motor-driven carving device MSG
1 x Broca de alta duração de 0.8mm
1 x Broca de ponto 6.30 x 2.50
1 x broca de alta duração de 0,2mm
1 x Floor cover ESD
1 x Broca de alta duração de 1.1mm
1 x Wood Lathe DB450
1 x Precision Drill/Grinder FBS 240/E
1 x MICRO Miller FF 230
1 x Insulation Resistance Tester MG500
1 x Super jig saw STS/E
1 x MICRO Band Saw MBS 240/E
1 x Broca de alta duração de 0.5mm
1 x Broca de alta duração de 0.3mm
1 x Conjunto de três brocas de ponto
1 x Broca de alta duração de 2.0mm
1 x Hand magnifier with LED light 3X
1 x Wood Lathe DB900
1 x MICROMOT 50/E
1 x MICRO woodturning lathe DB 250
1 x Surface planer AH 80
1 x MICRO shaper MP 400
1 x Long neck angle milling/drilling unit LWB 220/E
€23,165.49
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
SANWA-METER
SANWA-METER Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook