Top » Catalog » Micromot tools » All others » 28690

€73.98 + VAT

MICRO Screwdriver MIS 1. Complete with 16 inserts.
[28690]

MICRO Screwdriver MIS 1. Complete with 16 inserts.

With torque adjustable from 0.35 - 2.0 Nm. Quiet, light and with sensitive clutch. Used in electronic assembly lines, machine assembly and by model builders and clock makers.

The three stage planetary gearbox offers a reduction ration of 93:1, yielding the ideal speed of 200 - 250 rpm (depending on mains adapter used). The clutch is adjustable in the range 0.35 to 1.0 Nm in 5 steps. Tightening torques can be selected precisely. The six stage bypasses the clutch and yields approx. 2 Nm. An ideally positioned rocker switch provides on/off/reverse. Fibreglass reinforced NYLON lends high impact resistance to the housing. A Roehm chuck facilitates acceptance of all bit shanks, including 6 mm and 1/4". A 160 cm flexible cord ensures perfect mobility. The rear mounted metal hook is used with the optional balancer.

Available as a complete set, with plastic case and 16 bits (Chrome Molybdenum Steel). Weight 375 g. Overall length: 150 mm. Supplied in durable plastic case with 16 bits. We recommend the use of MICROMOT mains adapters (1.0 A, 12 V) with or without speed control

Note for industrial use:
At torques below 2.0 Nm, the MIS 1 powered screwdriver is superior to tools powered by compressed air. And not only because of low energy costs. It works quietly and is cleaner (no lubricated compressed air escapes into the working place). And its highly flexible spiral cable makes the unit comfortable to use.

Reviews

Customers who bought this product also purchased

MICROMOT Mains Adapter NG 5/E

Super-Cut

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Hot wire cutter THERMOCUT 230/E
1 x	Precision Drill/Grinder FBS 240/E
1 x	Bench drill machine TBM 220
1 x	Super jig saw STS/E
2 x	End side cutters 45º EUROline-Conductive
1 x	Thicknesser DH 40
2 x	Side cutters EUROline-Conductive
1 x	Motor-driven carving device MSG
1 x	MICRO Miller MF 70
1 x	Surface planer AH 80
1 x	Scroll saw DS 230/E
1 x	MICRO woodturning lathe DB 250
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	MICROMOT 50/EF
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	MICROMOT 50
1 x	MICRO cutter MIC
1 x	2-speed scroll saw DSH
1 x	MICROMOT 50/E
1 x	Table Saw FET
1 x	Hot wire cutter THERMOCUT 650
1 x	Cut off/mitre saw KGS 80
1 x	Replacement carving blades for MSG
1 x	MICRO Miller FF 500
1 x	Mill/Drill System BFW 40/E
1 x	Bench Circular Saw KS 230
1 x	MICROMOT 230/E
2 x	Mini side cutters EUROline-Conductive
1 x	MICRO shaper MP 400
1 x	Bench drill press TBH
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Precision drill grinder FBS 12/EF
1 x	Long neck straight drill/grinder LB/E
1 x	Professional Drill/Grinder IBS/E
1 x	Multiform grindstone
1 x	Hot wire cutter THERMOCUT 12/E
2 x	Replacement glue sticks for HKP 220
1 x	MICRO Band Saw MBS 240/E
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Jig saw STS 12/E
1 x	Tungsten carbide cutters set
1 x	Fluted filter for CW-matic
2 x	Universal and oil siphoning pump AP 12
1 x	Screwdriver bit set. 49-piece.
2 x	Tungsten Carbide Tipped (TCT)
1 x	V-slot cutter 6.5mm
1 x	Footswitch FS
2 x	Three jaw chuck for the lathe DB 250
1 x	Machine Vice MS 4
1 x	Rebating cutter 6.4mm
1 x	Super-Cut
1 x	Slot cutter 3.2mm
1 x	Slot cutter 5.0mm
1 x	Diamond-coated cutting disc for MIC
1 x	ESD-handling ser 9-361
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	Fine dust paper filter for CW-matic
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Grinding mop cylinder grit 80
1 x	Grinding mop cylinder grit 120
2 x	Step clamps made of steel
1 x	Conj 5 pinças ESD
1 x	Spare cutting wire
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Slot cutter 6.5mm
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Replacement belts for BSL 220/E
1 x	Core box bit 3.2mm
2 x	Independent four jaw chuck for the DB 250
1 x	10-piece wood router cutter set
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Rounding over cutter 6.4mm
1 x	Grinding mop cylinder grit 120
1 x	Grinding mop cylinder grit 240
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Angle cutter 45 °
1 x	Combi cutter 6.5/2.5mm
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Replacement belts for BSL 220/E
1 x	Diamond Coated
2 x	Replacement belts for BSL 220/E
1 x	Replacement belts for BSL 220/E
1 x	Five piece HSS chisel set
2 x	Precision steel vice PM 40
1 x	Super safety and specialty bit set, 75-piece
2 x	Wood Lathe DB900
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Half round cutter 13mm
1 x	Dividing attachment TA 230 for PF 250
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Round nose pliers 45º EUROline-Conductive
2 x	6-piece screwdriver and cross-recess set ESD
1 x	Mini side cutters EUROline-Conductive
1 x	Flat nose pliers 45º EUROline-Conductive
1 x	Collet Set for accurate use on round components
1 x	Vacum SAA 901
2 x	6-piece screwdriver set ESD
1 x	Fixed Steady
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Table Saw TKS 2500 SC
1 x	Flap Wheels
2 x	Centre Turning Attachment
1 x	End side cutters EUROline-Conductive
1 x	Four Jaw Chuck
1 x	Gear Chuck
1 x	surface planing and thicknessing ADH 250
2 x	Router base OFV
1 x	EUROline-Conductive set of pliers
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x	6-piece socket wrenches ESD
2 x	6-piece wrench key set ESD
1 x	surface planing and thicknessing ADH 200
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Table Sawr TKS 315 E
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Three-jaw steel drill chuck
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Wood Lathe DB450
2 x	6-piece TORX-screwdriver-set ESD
2 x	Chuck for TBM 220
1 x	Tool holder for rotary tools
1 x	Pensander PS 13
1 x	Engraving tool GG
2 x
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Sanding pads for OZI 220/E grit 240
1 x	Universal holder UHZ
1 x	MICROFLAME burner MFB/E
1 x	Diamond blade for MBS 240/E
1 x	Corundum grinding disc for LWS
1 x	Micro Compound Table KT 70
1 x	MICROFLAM gas soldering set MGS
1 x	Backing disc for LWS
1 x	Glass fibre contact cleaner brush
1 x	MICRO Heat gun MH 550
1 x	Diamond cutting blade for OZI
1 x	Diamond-coated cutting and roughing disc
1 x	Corundum sanding discs for LWS
1 x	Cutting disc, with reinforcement
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	sanding belts for BBS/s Grit 240
1 x	Blade holders for DS 460
1 x	Tungstein carbide rasp - and cutting disc
1 x	Precision Vice FMZ
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Corundum grinding disc for LWS
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Jig saw blades made of HSS
1 x	Glass fibre contact cleaner brush
1 x	Precision Vice FMS 75
1 x	Sanding fleece for LWS
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	sandpaper for PS 13 Grit 240
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	HSS immersion saw blades for OZI
1 x	sandpaper for PS 13 Grot 180

€16,121.25