Top » Catalog » Micromot tools » All others » 27490

€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Crosscut 'Super-Cut' blade
1 x	Dividing attachment TA 230 for PF 250
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Footswitch FS
1 x	Diamond blade
1 x	MICROMOT drill stand MB 200
1 x	Three-jaw steel drill chuck
1 x	Special Fused Alumina (Hardness N).
1 x	MICROMOT tool holder
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Mill/Drill Unit BFB 2000.
1 x	Aluminium Die-Cast
1 x	Polishing Set
1 x	Flexishaft MICROMOT 110/P
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	MICROMOT extension cord. 300cm.
1 x	Solid carbide saw blade
1 x	14-piece parallel supports set
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT steel collet set
2 x	Grinding mop cylinder grit 120
1 x	Blade holders for DS 460
1 x	Tungsten tipped saw blade
1 x	Micro Compound Table KT 70
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Silicon-Carbide.
1 x	Flexishaft MICROMOT 110/BF
1 x	sandpaper for PS 13 Grot 180
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Protective device for hand-operated MICROMOT
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Saw blade made of high-alloy special steel
1 x	sandpaper for PS 13 Grit 240
1 x	sandpaper for PS 13 Grit 400
1 x	Diamond Coated
1 x	Engraving tool GG
1 x	3-jaw chuck centrically clamping 80mm
1 x	MICRO-screwdrivers
1 x	6-piece TORX-screwdriver-set ESD
1 x	MICRO Heat gun MH 550
1 x	Cutting tool 16 mm
1 x	Dial gauge
2 x	Cutting tool 10 mm
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Brass contact cleaner brush
1 x	6-piece wrench key set ESD
1 x	MICROFLAM gas soldering set MGS
2 x	centrically clamping 125mm
1 x	quantum revolving center CM2
1 x	4-jaw chuck individually clamping 100mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	Replacement belts for BSL 220/E
1 x	Diamond-coated cutting disc for MIC
1 x	Grinding mop cylinder grit 240
1 x	Collet chuck ER25 for D250X550
1 x	Precision lathe PD 250/E
1 x	MICROFLAME burner MFB/E
1 x	Collet Set for accurate use on round components
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	machine base with shelves for D250X550
1 x	3-jaw chuck centrically clamping 100mm
1 x	Fixed Steady
1 x	Cutting tool HM 20 mm
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Replacement belts for BSL 220/E
1 x	Collet chuck ER32 for D250X550
1 x	centrically clamping 100mm
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Gear Chuck
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	6-piece socket wrenches ESD
1 x	Universal holder UHZ
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	TU 2404
1 x	Morse taper MT2 - B16
1 x	4-jaw chuck individually clamping 125mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	CM2 - B16 - M10
1 x	6-piece screwdriver set ESD
1 x	Complete Engraving Kit with trial glass
1 x	6-piece set of ESD/EGB tweezers
1 x	Grinding mop cylinder grit 80
1 x	Grinding mop cylinder grit 120
1 x	Tungsten Carbide Tipped (TCT)
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	lathe tools 10mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	6-piece screwdriver and cross-recess set ESD
1 x	BIT-SET
1 x	Tool holder for rotary tools
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	End milling cutter kit HSS 12 pcs
1 x	ACCENT SERVICE TOOLS SET
1 x	Centre Turning Attachment
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Lathe tools 10mm pastilhados
1 x	Replacement belts for BSL 220/E
1 x	Tool holder type H for SWH 1-A
1 x	Super-Cut
1 x	Replacement belts for BSL 220/E
1 x	Face clamping disc for D250X550
1 x	Cutter head for copy and surface milling MT3
1 x	Lathe chuck flange for D250X550
1 x	Cutting tool 8 mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E

€9,051.55