Top » Catalog » Micromot tools » All others » 27490

€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Mini side cutters EUROline-Conductive
1 x	Microfibre cloth
1 x
1 x	Lambswool polishing disc
3 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Five piece HSS chisel set
1 x	Professional set for finish grinding and polishing
1 x	Super-fine sanding discs grain 2000
1 x	Floor cover ESD
1 x	Three jaw chuck for the lathe DB 250
2 x	Flat nose pliers 45º EUROline-Conductive
2 x	Mini side cutters EUROline-Conductive
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Super-fine sanding discs grain 400
1 x	Independent four jaw chuck for the DB 250
1 x	Professional polishing sponge
1 x	Polishing felt, medium hard
1 x	Felt cloth polishing disc (100 x 15mm)
2 x	Backing disc for LWS
2 x	Mini side cutters EUROline-Conductive
1 x	Super-fine sanding discs grain 000
2 x	EUROline-Conductive set of pliers
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Universal polishing paste
2 x	End side cutters 45º EUROline-Conductive
1 x	MICROMOT tool holder
1 x	Protective device for hand-operated MICROMOT
1 x	MICROMOT 50
1 x	Micro Compound Table KT 70
1 x	Machine Vice MS 4
1 x	6-piece wrench key set ESD
1 x	Precision Drill/Grinder FBS 240/E
1 x	BIT-SET
1 x	Precision drill grinder FBS 12/EF
1 x	HSS boring tool set, 6 pieces
1 x	Fine dust paper filter for CW-matic
1 x	Corundum sanding discs for LWS
1 x	Long neck straight drill/grinder LB/E
2 x	Crocodile clip
1 x	6-piece set of ESD/EGB tweezers
1 x	MICRO Miller FF 500
3 x	Earthing module
2 x	Earth wire
1 x	MICROMOT 50/EF
1 x	MICROMOT 50/E
1 x	MICROMOT 230/E
2 x	Earth wire with dummy Schunko-plug
1 x	MICRO Miller MF 70
1 x	Sanding fleece for LWS
2 x	Contact bracelet with spiral cord
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	Lathe System PD 400
1 x	Corundum fan sander for LWS
1 x	Round nose pliers 45º EUROline-Conductive
1 x	End side cutters EUROline-Conductive
1 x	Precision lathe PD 250/E
1 x	Diamond-coated cutting disc for MIC
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Three piece thread cutting set
1 x	Fluted filter for CW-matic
1 x	Three-jaw steel drill chuck
2 x	Earth wire
1 x	Corundum sanding discs for LWS
1 x	MICROMOT steel collet set
1 x	6-piece socket wrenches ESD
1 x	Step clamps made of steel
1 x	Diamond-coated cutting and roughing disc
1 x	MICROMOT drill stand MB 200
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Flexishaft MICROMOT 110/BF
1 x	Flexishaft MICROMOT 110/P
1 x	14-piece parallel supports set
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Corundum bound cutting disc for LWS
1 x	Bench drill press TBH
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Tungsten carbide cutters set
1 x	Professional Drill/Grinder IBS/E
1 x	Aluminium Die-Cast
1 x	6-piece TORX-screwdriver-set ESD
1 x	MICRO Miller FF 230
1 x	Corundum grinding disc for LWS
1 x	Dividing attachment TA 230 for PF 250
1 x	6-piece screwdriver set ESD
1 x	Bench drill machine TBM 220
1 x	Brass contact cleaner brush
1 x	Footswitch FS
1 x	Mill/Drill System BFW 40/E
1 x	Precision steel vice PM 40
1 x	Corundum grinding disc for LWS
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Diamond blade
1 x	Crosscut 'Super-Cut' blade
1 x	Collet Set for accurate use on round components
1 x	Solid carbide saw blade
1 x	Centre Turning Attachment
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Universal holder UHZ
1 x	Side cutters EUROline-Conductive
1 x	Fixed Steady
1 x	Blade holders for DS 460

€10,643.43