Top » Catalog » Micromot tools » All others » 27490

€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Grinding mop cylinder grit 120
3 x	Crosscut 'Super-Cut' blade
3 x	Diamond blade
1 x	Mini side cutters EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
3 x	Tungsten tipped saw blade
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Side cutters EUROline-Conductive
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	End side cutters 45º EUROline-Conductive
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Mini side cutters EUROline-Conductive
1 x	End side cutters EUROline-Conductive
3 x	Corundum sanding discs for LWS
1 x	Saw blade made of high-alloy special steel
1 x	Solid carbide saw blade
2 x	Fluted filter for CW-matic
1 x	Universal holder UHZ
3 x	Band knife of hardened spring band steel (without teeth)
1 x	Router base OFV
2 x	Silicon-Carbide.
1 x	Polishing Set
2 x	Corundum grinding disc for LWS
2 x	Sanding fleece for LWS
1 x	MICROFLAME burner MFB/E
2 x	Tungstein carbide rasp - and cutting disc
2 x	Corundum fan sander for LWS
2 x	Backing disc for LWS
3 x	Blade for Steel and brass
1 x	MICROFLAM gas soldering set MGS
1 x	Engraving tool GG
3 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x	Blade guides separately
2 x	HSS immersion saw blades for OZI
2 x	Corundum grinding disc for LWS
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Diamond-coated cutting and roughing disc
3 x	Hot wire cutter THERMOCUT 12/E
3 x	Micro Compound Table KT 70
1 x	MICRO-screwdrivers
1 x	Bandsaw blade of bimetal for MBS 240/E
2 x	Corundum bound cutting disc for LWS
2 x	Replacement carving blades for MSG
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Disc Sander TG 250/E
1 x	Disc Sander TG 125/E
1 x	Long neck angle grinder LHW
1 x	IC Test clip 20 pins
1 x	Diamond-coated cutting disc for MIC
1 x	Universal and oil siphoning pump AP 12
1 x	Polishing machine PM 100
1 x	Multiform grindstone
1 x	Pensander PS 13
1 x	Sanding fleece for LWS
1 x	Belt sander BS/E
1 x	Screwdriver bit set. 49-piece.
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Diamond cutting blade for OZI
2 x	Hot wire cutter THERMOCUT 650
1 x	Special Fused Alumina (Hardness N).
1 x	HSS cutting blade for OZI
1 x	Sanding pads for OZI 220/E grit 150
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Sanding pads for OZI 220/E grit 80
1 x	HSS immersion saw blades for OZI
1 x	Corundum fan sander for LWS
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Fine dust paper filter for CW-matic

€2,896.41