Top » Catalog » Micromot tools » Precision Lathe » 24002

€1,060.00 + VAT

Precision lathe PD 250/E
[24002]

Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance 250mm. Swing 70mm. Height over cross slide 46mm. Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Engraving tool GG
1 x	Replacement glue sticks for HKP 220
1 x	Replacement belts for BSL 220/E
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Three-jaw steel drill chuck
2 x	Dividing attachment TA 230 for PF 250
1 x	Pensander PS 13
1 x	Sanding pads for OZI 220/E grit 150
1 x	Universal and oil siphoning pump AP 12
1 x	Combi cutter 6.5/2.5mm
1 x	Silicon-Carbide.
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Core box bit 3.2mm
1 x	Sanding pads for OZI 220/E grit 240
1 x	Slot cutter 6.5mm
1 x	Precision steel vice PM 40
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	HSS immersion saw blades for OZI
1 x	Slot cutter 3.2mm
1 x	surface planing and thicknessing ADH 250
1 x	V-slot cutter 6.5mm
2 x	Three jaw chuck for the lathe DB 250
1 x	Rounding over cutter 6.4mm
1 x	Table Sawr TKS 315 E
2 x	Chuck for TBM 220
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Slot cutter 5.0mm
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x
2 x	Router base OFV
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Table Saw TKS 2500 SC
1 x	HSS immersion saw blades for OZI
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Hot wire cutter THERMOCUT 650
1 x	Tungsten carbide cutters set
1 x	Centre Turning Attachment
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Polishing Set
1 x	HSS cutting blade for OZI
1 x	Spare cutting wire
1 x	Machine Vice MS 4
1 x	Angle cutter 45 °
1 x	Rebating cutter 6.4mm
1 x	surface planing and thicknessing ADH 200
1 x	Diamond cutting blade for OZI
1 x	Sanding pads for OZI 220/E grit 80
1 x	Fine dust paper filter for CW-matic
2 x	Step clamps made of steel
2 x	Footswitch FS
1 x	Special Fused Alumina (Hardness N).
1 x	Edge cutter with pin 6.4mm
1 x	Fluted filter for CW-matic
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Flap Wheels
2 x	Independent four jaw chuck for the DB 250
1 x	Half round cutter 13mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Diamond-coated cutting and roughing disc
1 x	Flexishaft MICROMOT 110/BF
1 x	Long neck straight drill/grinder LB/E
1 x	14-piece parallel supports set
1 x	Protective device for hand-operated MICROMOT
1 x	Jig saw STS 12/E
1 x	Mill/Drill Unit BFB 2000.
1 x	Table Saw FET
1 x	Bench Circular Saw KS 230
1 x	Corundum fan sander for LWS
1 x	Corundum grinding disc for LWS
1 x	MICROMOT extension cord. 300cm.
1 x	Bench drill press TBH
1 x	MICRO Band Saw MBS 240/E
1 x	Corundum sanding discs for LWS
1 x	Precision Drill/Grinder FBS 240/E
2 x	Micro Compound Table KT 70
1 x	Long neck angle milling/drilling unit LWB 220/E
1 x	sanding belts for BBS/s Grit 150
1 x	MICRO cutter MIC
1 x	MICROMOT 50
1 x	Surface planer AH 80
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Supercut jig saw blades of special steel
1 x	2-speed scroll saw DSH
1 x	MICROMOT tool holder
1 x	MICROMOT drill stand MB 200
1 x	Tungsten Carbide Tipped (TCT)
1 x	Scroll saw DS 230/E
1 x	Diamond Coated
1 x	sanding belts for BBS/s Grit 80
1 x	Precision drill grinder FBS 12/EF
1 x	Cut off/mitre saw KGS 80
1 x	Super jig saw STS/E
1 x	Mill/Drill System BFW 40/E
1 x	MICROMOT 230/E
1 x	Bench drill machine TBM 220
1 x	MICRO Miller FF 500
1 x	Thicknesser DH 40
1 x	sanding belts for BBS/s Grit 240
1 x	Sanding fleece for LWS
1 x	Corundum bound cutting disc for LWS
1 x	MICROMOT steel collet set
1 x	Professional Drill/Grinder IBS/E
1 x	MICRO woodturning lathe DB 250
1 x	Corundum grinding disc for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	Motor-driven carving device MSG
1 x	MICROMOT 50/EF
1 x	Flexishaft MICROMOT 110/P
1 x	Corundum fan sander for LWS
1 x	MICROMOT 50/E
1 x	MICRO shaper MP 400
1 x	Corundum sanding discs for LWS
1 x	Backing disc for LWS
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	MICRO Miller MF 70
1 x	Aluminium Die-Cast
1 x	Jig saw blades made of HSS
1 x	Diamond-coated cutting disc for MIC
1 x	Super-Cut
1 x	Sanding fleece for LWS
1 x	Blade guides separately
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Complete Engraving Kit with trial glass
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Replacement belts for BSL 220/E
1 x	Three piece thread cutting set
1 x	Diamond blade for MBS 240/E
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICROMOT glue gun HKP 220
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	MICRO Heat gun MH 550
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	MICROFLAME burner MFB/E
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).

€12,917.07