€1,799.00 + VAT

Lathe System PD 400
[24400]

Lathe System PD 400

Lathe System PD 400

Lathe PD 400 is unequalled in its class. Don't waste your time if you are trying to find similar value for money.

Ideal for straight and cross cuts, taper turning, internal and external thread cutting slotting etc. Useable on materials such as steel, non-ferrous metals (aluminum, brass etc.). Negligible variances even under heavy loads.
Ground and hardened beds of ribbed construction for highest precision and stability. The wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill PF 400.

  1. Supplied with change gears for thread cutting in 19 steps (0,2 - 3,0 mm). Clearly positioned and easy to change.
  2. Main switch with emergency stop function and restart protection.
  3. Quality, precision 3 jaw chuck with 100 mm capacity.
  4. Powerful capacitor motor with 550 W output.
  5. Quick-change tool post with 2 holders (fitted with adjustable height and stop).
  6. Includes MT2 rotating centre in tailstock.
  7. Easy to use hand wheel of aluminum with adjustable scale of steel. 1 division = 0.05 mm.
  8. Fully enclosed leadscrew with Acme thread (12 x 1.5).
  9. Cross-braced cast iron bed with wide, ground ways.
  10. Handwheel for quick support change.
  11. Switch for clockwise, off and counter-clockwise rotation.
  12. Selector for auto feed.
     

Technical Data:
Centre distance 400 mm, centre height 85 mm. The swing over the top slide is 116 mm (!). Solid, ribbed bed is made of quality cast iron with ground and hardened ways. Oversized spindle with 2 adjustable taper bearings, MT 3 taper and 20.5 mm bore. Run-out, without chuck, 5/1,000 mm.

The precision 3 jaw chuck has a capacity of up to 100 mm. Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1,400 rpm; Level 2: 160 / 660 / 2,800 rpm. Powerful, quiet capacitor motor with 550 W output. All adjusting wheels fitted with scales that may be zeroed. 1 division = 0.05 mm. The auto feed has speed of 0.07 or 0.14 mm/rev.

An integrated gearbox with change gears provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0 mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre MK 2 and 10 mm MT 2 gear chuck are included. Cross slide travel 85 mm and topslide 55 mm. Swivels through 45° for taper turning. Toolstock with MT 2 (short), spindle travel 40 mm and Ø 24 mm. Supplied with scale. Approx. size 900 x 400 x 300 mm. Weight approx. 45 kg. For cutters of 10 x 10 mm.

Including individual quick-change holders.
 

Reviews
Manufacturers
1 x Tungsten carbide cutters set
2 x Tungstein carbide rasp - and cutting disc
2 x Crosscut 'Super-Cut' blade
2 x Lathe System PD 400
1 x Protective device for hand-operated MICROMOT
1 x Universal polishing paste
2 x Flexishaft MICROMOT 110/P
2 x Bench drill press TBH
1 x Self-adhesive white corundum sanding discs for TG 250/E
3 x Bench drill machine TBM 220
2 x Corundum bound cutting disc for LWS
3 x Footswitch FS
1 x Self-adhesive white corundum sanding discs for TG 250/E
2 x Aluminium Die-Cast
1 x MICRO Miller FF 500
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
2 x Mill/Drill System BFW 40/E
3 x Micro Compound Table KT 70
2 x Flexishaft MICROMOT 110/BF
2 x 14-piece parallel supports set
1 x Diamond-coated cutting disc for MIC
2 x Three-jaw steel drill chuck
1 x Tool holder for rotary tools
2 x Saw blade made of high-alloy special steel
2 x Four Jaw Chuck
2 x Corundum grinding disc for LWS
1 x Machine Vice MS 4
1 x Precision lathe PD 250/E
1 x Spare cutting wire
1 x Step clamps made of steel
1 x Collet Set for accurate use on round components
2 x Cutting tools of high quality cobalt HSS steel, ground
2 x Fixed Steady
1 x 
2 x Mill/Drill Unit BFB 2000.
1 x Tungsten Carbide Tipped (TCT)
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
2 x Gear Chuck
1 x Corundum sanding discs for LWS
2 x MICROMOT 50/E
2 x HSS boring tool set, 6 pieces
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Corundum grinding disc for LWS
2 x MICROMOT tool holder
1 x Long neck angle milling/drilling unit LWB 220/E
2 x MICROMOT drill stand MB 200
1 x Felt cloth polishing disc (100 x 15mm)
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Cutting disc, with reinforcement
2 x Precision Drill/Grinder FBS 240/E
1 x Three piece thread cutting set
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Long neck straight drill/grinder LB/E
2 x Dividing attachment TA 230 for PF 250
1 x Precision steel vice PM 40
1 x Replacement cutting disc for MICRO cutter MIC
1 x MICROMOT 50/EF
1 x Diamond-coated cutting and roughing disc
1 x Sanding fleece for LWS
1 x Backing disc for LWS
1 x MICROMOT extension cord. 300cm.
1 x Corundum sanding discs for LWS
1 x MICROMOT 230/E
1 x Sanding fleece for LWS
1 x Diamond blade
1 x Corundum fan sander for LWS
1 x Corundum fan sander for LWS
1 x Solid carbide saw blade
1 x MICROMOT Mains Adapter NG 2/S
1 x Precision drill grinder FBS 12/EF
1 x MICRO Miller FF 230
€12,731.67
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook