Top » Catalog » Micromot tools » ACCESSORIES » Accessories for THERMOCUT 12/E » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 12/E
Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E	Spare cutting wire

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	EPROM/Flash-PLCC32-2-DIL32 socket submodule
2 x	Insulation Resistance Tester MG125
1 x	Micro Compound Table KT 70
2 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	BGA-Bottom-118
1 x	MICROMOT tool holder
1 x	Slot cutter 6.5mm
2 x
1 x	Special Fused Alumina (Hardness N).
1 x	MICROMOT Mains Adapter NG 2/S
2 x	Angle cutter 45 °
1 x	End side cutters EUROline-Conductive
2 x	Three-jaw steel drill chuck
1 x	BGA-Bottom-125
1 x	BGA-0245/0243
1 x	Diamond blade for MBS 240/E
1 x	Five piece HSS chisel set
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Supercut jig saw blades of special steel
1 x	BGA-Bottom-106
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Slot cutter 5.0mm
2 x	Brass contact cleaner brush
1 x	Collet Set for accurate use on round components
1 x	Glass fibre contact cleaner brush
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	BGA-Bottom-11
1 x	Flexishaft MICROMOT 110/P
2 x	BeeHive204
1 x	BGA-Bottom-103
1 x	Three jaw chuck for the lathe DB 250
1 x	Edge cutter with pin 6.4mm
1 x	Jig saw blades made of HSS
1 x	Fixed Steady
1 x	BGA-0246/0244
1 x	Diamond-coated cutting disc for MIC
1 x	Protective device for hand-operated MICROMOT
2 x	Independent four jaw chuck for the DB 250
1 x	BGA-Bottom-111
1 x	BGA-0246/0243
1 x	BGA-Bottom-10
2 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Footswitch FS
1 x	MICROMOT extension cord. 300cm.
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	V-slot cutter 6.5mm
1 x	Tool holder for rotary tools
2 x	Centre Turning Attachment
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	BGA-Bottom-1
2 x	Band knife of hardened spring band steel (without teeth)
1 x	Warding files set, 6pcs
1 x	Rebating cutter 6.4mm
1 x	Silicon-Carbide.
1 x	BGA-0245/0241
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Polishing Set
1 x	Slot cutter 3.2mm
1 x	Gear Chuck
1 x	Mill/Drill Unit BFB 2000.
1 x	14-piece parallel supports set
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Core box bit 3.2mm
1 x	Universal polishing paste
1 x	Insulation Resistance Tester MG500
1 x	Rounding over cutter 6.4mm
1 x	Ceramic-tipped tweezers and ESD 5-095
1 x	Stainless steel brushes
1 x	High quality corundum grinding bits
1 x	broca de alta duração de 0,2mm
1 x	Steel brushes
2 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Combination pliers 185mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	6-piece TORX-screwdriver-set ESD
1 x	Diamond-coated cutting and roughing disc
1 x	Grinding mop cylinder grit 240
1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	Bench Circular Saw KS 230
1 x	Broca de alta duração de 2.4mm
1 x	Ceramic tweezers 5-081
1 x	Universal and oil siphoning pump AP 12
1 x	Broca de alta duração de 2.3mm
1 x	Polishing paste
1 x	Beeprog2C
1 x	Antiallergical Tweezers 5-155-1
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Combination pliers 160mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Combination pliers 205mm
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	High quality corundum grinding bits
1 x	sandpaper for PS 13 Grit 400
2 x	Compact workshop vacuum cleaner CW-matic
1 x	Stainless steel wheels
1 x	Fibre-Cut Discs
1 x	Broca de alta duração de 3.0mm
1 x	6pcs Double Open End wrench set
1 x	Side cutters 180mm
1 x	Chuck for TBM 220
1 x	MICRO Band Saw MBS 240/E
1 x	Thicknesser DH 40
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	6-piece screwdriver and cross-recess set
1 x	Corundum sanding discs for LWS
1 x	Sanding bands 14x13mm
1 x	Lathe tools 10mm pastilhados
1 x	Super-fine sanding discs grain 400
1 x	ACCENT SERVICE TOOLS SET
1 x	Broca de alta duração de 2.9mm
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	MICRO cutter MIC
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	PLCC Extractor
1 x	6-piece screwdriver and cross-recess set
1 x	Dividing attachment TA 230 for PF 250
1 x	Broca de alta duração de 2.8mm
1 x	lathe tools 10mm
1 x	SCLCR1010E06
1 x	Motor-driven carving device MSG
1 x	Component tweezers 5-008
1 x	Broca de alta duração de 2.6mm
2 x	Conj 5 pinças ESD
1 x	Lathe tools 8mm pastilhados
1 x	High quality corundum grinding bits
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Cutting tool 16 mm
1 x	Fluted filter for CW-matic
1 x	High quality corundum grinding bits
1 x	Antiallergical Tweezers 5-125-1
1 x	Backing disc for LWS
1 x	High quality corundum grinding bits
1 x	magnetic base 80kg
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	MICRO woodturning lathe DB 250
1 x	6-piece wrench key set ESD
1 x	Component tweezers 5-007
1 x	Super-Cut
1 x	Engraving tool GG
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Precision steel vice PM 40
1 x	Ceramic-tipped tweezers and ESD 5-096
1 x	Corundum fan sander for LWS
1 x	Fine dust paper filter for CW-matic
1 x	6-piece socket wrenches ESD
1 x	Ceramic tweezers 5-082
1 x	Stainless steel cups
1 x	Component tweezers 5-006
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Broca de ponto 3.15 x 1.25
1 x	Grinding mop cylinder grit 120
1 x	BIT-SET
1 x	Pensander PS 13
1 x	Steel wheels
1 x	Sanding fleece for LWS
1 x	Table Saw FET
1 x	Insert CCGT060202-AK
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Professional polishing sponge
1 x	Broca de alta duração de 2.2mm
1 x	Step clamps made of steel
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	MICRO shaper MP 400
1 x	Cutting tool 10 mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Corundum sanding discs for LWS
1 x	Antiallergical Tweezers 5-121-1
1 x	2-speed scroll saw DSH
1 x	Machine Vice MS 4
1 x	High quality corundum grinding bits
1 x	Cut off/mitre saw KGS 80
1 x	Diamond Cutting Discs
1 x	Flap Wheels
1 x	Combination pliers 170mm

€16,792.17