Top » Catalog » Micromot tools » ACCESSORIES » Accessories for THERMOCUT 12/E » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 230/E
MICROFLAME burner MFB/E	Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	IC tweezers
1 x	Replacement carving blades for MSG
1 x	MICROMOT tool holder
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	sanding belts for BBS/s Grit 80
1 x	IC Test clip 20 pins
1 x	sandpaper for PS 13 Grot 180
1 x	Grinding mop cylinder grit 120
1 x	Tungsten Carbide Tipped (TCT)
1 x	Flexishaft MICROMOT 110/BF
1 x	Super safety and specialty bit set, 75-piece
1 x	Grinding mop cylinder grit 120
1 x	Micro Compound Table KT 70
1 x	Dividing attachment TA 230 for PF 250
1 x	Pinça SOIC de 8 pinos
1 x	Diamond Coated
1 x	sandpaper for PS 13 Grit 240
1 x	Hot wire cutter THERMOCUT 650
1 x	Three-jaw steel drill chuck
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	sandpaper for PS 13 Grit 400
1 x	Footswitch FS
1 x	Grinding mop cylinder grit 80
1 x	Four Jaw Chuck
1 x	sanding belts for BBS/s Grit 150
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Hot wire cutter THERMOCUT 230/E
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Collet Set for accurate use on round components
2 x	14-piece parallel supports set
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Fixed Steady
1 x	Screwdriver bit set. 49-piece.
1 x	Grinding mop cylinder grit 240
1 x	Super-Cut
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	MICROMOT drill stand MB 200
1 x	Protective device for hand-operated MICROMOT
1 x	Flexishaft MICROMOT 110/P
1 x	Replacement glue sticks for HKP 220
1 x	Universal and oil siphoning pump AP 12
2 x	Aluminium Die-Cast
1 x	Gear Chuck
1 x	Mill/Drill Unit BFB 2000.
1 x	Multiform grindstone
1 x	MICROMOT extension cord. 300cm.
1 x	lathe tools 10mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Tool holder for rotary tools
1 x	Centre Turning Attachment
1 x	MICROMOT steel collet set
1 x	PLCC Puller
1 x	Sanding fleece for LWS
3 x	Backing disc for LWS
1 x	Ball-shaped diamond coated 2.2mm
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Core box bit 3.2mm
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Angle polisher WP/E
1 x	MICRO cutter MIC
1 x	Tungstein carbide rasp - and cutting disc
1 x	2-speed scroll saw DSH
1 x	Slot cutter 5.0mm
1 x	Motor-driven carving device MSG
1 x	Blade holders for DS 460
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	MICRO woodturning lathe DB 250
1 x	Table Saw FET
1 x	Corundum grinding disc for LWS
1 x	Bench drill press TBH
1 x	Super jig saw STS/E
1 x	Thicknesser DH 40
1 x	Corundum grinding disc for LWS
2 x	10-piece wood router cutter set
1 x	Slot cutter 3.2mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Super-fine sanding discs grain 000
1 x	Ball-shaped diamond coated 1.2mm
1 x	Morse taper MT2 - B16
1 x	Belt sander BS/E
1 x	Sanding fleece for LWS
2 x	CM2 - B16 - M10
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICRO Band Saw MBS 240/E
1 x	Angle cutter 45 °
1 x	Corundum fan sander for LWS
1 x	Rebating cutter 6.4mm
1 x	Jig saw STS 12/E
1 x	Cut off/mitre saw KGS 80
1 x	Scroll saw DS 230/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Morse taper MT3 - B16
1 x	Corundum sanding discs for LWS
1 x	Coarse-toothed (18 TPI per 25mm)
2 x	Bench Circular Saw KS 230
1 x	Diamond-coated cutting and roughing disc
1 x	Ball-shaped diamond coated 3.2mm
1 x	Combi cutter 6.5/2.5mm
1 x	Edge cutter with pin 6.4mm
1 x	Blade for Steel and brass
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Rounding over cutter 6.4mm
1 x	Surface planer AH 80
1 x	V-slot cutter 6.5mm
1 x	Slot cutter 6.5mm
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Bench drill machine TBM 220
1 x	TU 2004V
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Corundum bound cutting disc for LWS
1 x
1 x	Half round cutter 13mm
1 x	Ball shaped milling cutters
1 x	Corundum fan sander for LWS
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Saw blade made of high-alloy special steel
1 x	Diamond-coated cutting disc for MIC
1 x	Super-fine sanding discs grain 400
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Replacement belts for BSL 220/E
1 x	Diamond blade
1 x	Polishing felt, medium hard
1 x	Tungsten tipped saw blade
1 x	Replacement belts for BSL 220/E
1 x	Replacement belts for BSL 220/E
2 x	BIT-SET
1 x	Professional set for finish grinding and polishing
1 x	Lambswool polishing disc
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Replacement belts for BSL 220/E
1 x	Professional polishing sponge
1 x	Crosscut 'Super-Cut' blade
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Super-fine sanding discs grain 2000
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Solid carbide saw blade
1 x	Microfibre cloth
1 x	Lathe System PD 400
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Complete Engraving Kit with trial glass
1 x	quantum revolving center CM2
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Special Fused Alumina (Hardness N).

€10,259.36