Top » Catalog » Micromot tools » ACCESSORIES » Accessories for THERMOCUT 12/E » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 230/E
MICROFLAME burner MFB/E	Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Mini side cutters EUROline-Conductive
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	MICROFLAME burner MFB/E
1 x	Mini side cutters EUROline-Conductive
1 x	End side cutters 45º EUROline-Conductive
1 x	MICROMOT glue gun HKP 220
1 x	Router base OFV
1 x	Mini side cutters EUROline-Conductive
1 x	Universal holder UHZ
1 x	MICROFLAM gas soldering set MGS
1 x	Side cutters EUROline-Conductive
1 x	MICRO Heat gun MH 550
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Engraving tool GG
1 x	Complete Engraving Kit with trial glass
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	End side cutters EUROline-Conductive
1 x	MICRO-screwdrivers
1 x	Flexishaft MICROMOT 110/P
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Micro Compound Table KT 70
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	MICROMOT drill stand MB 200
1 x	Precision lathe PD 250/E
1 x	Collet Set for accurate use on round components
1 x	Universal polishing paste
1 x	Fixed Steady
1 x	Mill/Drill Unit BFB 2000.
1 x	Centre Turning Attachment
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Grinding mop cylinder grit 120
1 x	Tungsten carbide cutters set
1 x	Machine Vice MS 4
1 x	Flexishaft MICROMOT 110/BF
1 x	HSS boring tool set, 6 pieces
1 x	Aluminium Die-Cast
1 x	Grinding mop cylinder grit 120
1 x	Tool holder for rotary tools
1 x	Step clamps made of steel
1 x	sandpaper for PS 13 Grit 240
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Grinding mop cylinder grit 240
1 x	Three piece thread cutting set
1 x	sandpaper for PS 13 Grit 400
1 x	Dividing attachment TA 230 for PF 250
1 x	MICROMOT tool holder
1 x	14-piece parallel supports set
1 x	Precision steel vice PM 40
1 x	MICROMOT steel collet set
1 x	Lathe System PD 400
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	MICROMOT extension cord. 300cm.
1 x	Footswitch FS
1 x	Grinding mop cylinder grit 80
1 x	Protective device for hand-operated MICROMOT
1 x	sandpaper for PS 13 Grot 180
1 x	Gear Chuck
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Four Jaw Chuck
1 x	Three-jaw steel drill chuck
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Sanding pads for OZI 220/E grit 80
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	HSS immersion saw blades for OZI
1 x	Diamond-coated cutting disc for MIC
1 x	Diamond cutting blade for OZI
1 x	Blade holders for DS 460
1 x	Fine dust paper filter for CW-matic
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	HSS cutting blade for OZI
1 x	Sanding pads for OZI 220/E grit 240

€5,817.67