Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 12/E
Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E	Spare cutting wire

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	PLCC Extractor
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x
1 x	Universal polishing paste
1 x	Micro Compound Table KT 70
2 x	Chuck for TBM 220
1 x	IC tweezers
2 x	Felt cloth polishing disc (100 x 15mm)
2 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	PLCC Puller
1 x	Jig saw blades made of HSS
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	V-slot cutter 6.5mm
1 x	Slot cutter 6.5mm
1 x	Special Fused Alumina (Hardness N).
1 x	Independent four jaw chuck for the DB 250
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Angle cutter 45 °
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Edge cutter with pin 6.4mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Engraving tool GG
1 x	Sanding fleece for LWS
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Corundum fan sander for LWS
1 x	Diamond-coated cutting and roughing disc
1 x	Flap Wheels
1 x	Rounding over cutter 6.4mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Half round cutter 13mm
1 x	EUROline-Conductive set of pliers
1 x	ACCENT SERVICE TOOLS SET
1 x	Step clamps made of steel
1 x	Corundum grinding disc for LWS
1 x	Slot cutter 3.2mm
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	10-piece wood router cutter set
1 x	Rebating cutter 6.4mm
1 x	Replacement glue sticks for HKP 220
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Centre Turning Attachment
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Pensander PS 13
1 x	Diamond-coated cutting disc for MIC
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Combi cutter 6.5/2.5mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Corundum sanding discs for LWS
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Core box bit 3.2mm
1 x	Silicon-Carbide.
1 x	Dividing attachment TA 230 for PF 250
1 x	MICROMOT Mains Adapter NG 2/S
2 x	Universal and oil siphoning pump AP 12
1 x	Backing disc for LWS
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Corundum sanding discs for LWS
1 x	Corundum bound cutting disc for LWS
1 x	Corundum fan sander for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	Slot cutter 5.0mm
1 x	Corundum grinding disc for LWS
1 x	Supercut jig saw blades of special steel
1 x	Router base OFV
1 x	Blade holders for DS 460
1 x	Polishing Set
1 x	Replacement belts for BSL 220/E
1 x	Sanding fleece for LWS
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Three-jaw steel drill chuck
1 x	Replacement belts for BSL 220/E
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Protective device for hand-operated MICROMOT
1 x	Side cutters EUROline-Conductive
1 x	Belt sander BS/E
1 x	14-piece parallel supports set
1 x	Long neck straight drill/grinder LB/E
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Mini side cutters EUROline-Conductive
1 x	Crosscut 'Super-Cut' blade
1 x	Mini side cutters EUROline-Conductive
1 x	Conj 5 pinças ESD
1 x	ESD Tweezers 5-195
1 x	Replacement belts for BSL 220/E
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Fluted filter for CW-matic
1 x	Aluminium Die-Cast
1 x	End side cutters EUROline-Conductive
1 x	Disc Sander TG 125/E
1 x	Precision Drill/Grinder FBS 240/E
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Angle polisher WP/E

€2,928.12