Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 230/E
MICROFLAME burner MFB/E	Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Polishing Set
1 x	sandpaper for PS 13 Grit 400
1 x	Fluted filter for CW-matic
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Fine dust paper filter for CW-matic
1 x	Silicon-Carbide.
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Independent four jaw chuck for the DB 250
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	sandpaper for PS 13 Grot 180
1 x	Three jaw chuck for the lathe DB 250
1 x	Special Fused Alumina (Hardness N).
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	sandpaper for PS 13 Grit 240
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Grinding mop cylinder grit 120
1 x	14-piece parallel supports set
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Diamond-coated cutting and roughing disc
1 x	Aluminium Die-Cast
1 x	Universal polishing paste
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	10-piece wood router cutter set
2 x	Backing disc for LWS
1 x	Corundum sanding discs for LWS
1 x	Edge cutter with pin 6.4mm
1 x	Mill/Drill Unit BFB 2000.
1 x	Footswitch FS
2 x	Grinding mop cylinder grit 80
1 x	Blade holders for DS 460
1 x	MICROMOT extension cord. 300cm.
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Sanding fleece for LWS
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	MICROMOT steel collet set
1 x	Diamond-coated cutting disc for MIC
1 x	Replacement glue sticks for HKP 220
1 x	Chuck for TBM 220
1 x	Step clamps made of steel
1 x	Tungstein carbide rasp - and cutting disc
1 x	Machine Vice MS 4
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Corundum sanding discs for LWS
2 x	Micro Compound Table KT 70
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	MICROMOT drill stand MB 200
1 x	Corundum fan sander for LWS
1 x	Grinding mop cylinder grit 120
1 x
1 x	Slot cutter 5.0mm
1 x	Precision steel vice PM 40
1 x	Three-jaw steel drill chuck
1 x	Tungsten carbide cutters set
1 x	Corundum bound cutting disc for LWS
1 x	Sanding fleece for LWS
1 x	Corundum grinding disc for LWS
1 x	Half round cutter 13mm
1 x	Grinding mop cylinder grit 240
1 x	Corundum grinding disc for LWS
1 x	Slot cutter 3.2mm
1 x	Dividing attachment TA 230 for PF 250
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Flexishaft MICROMOT 110/BF
1 x	Angle cutter 45 °
1 x	Slot cutter 6.5mm
1 x	V-slot cutter 6.5mm
1 x	Protective device for hand-operated MICROMOT
1 x	Combi cutter 6.5/2.5mm
1 x	Rounding over cutter 6.4mm
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Corundum fan sander for LWS
1 x	Flexishaft MICROMOT 110/P
1 x	Core box bit 3.2mm
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Rebating cutter 6.4mm
1 x	MICROMOT tool holder
1 x	Super-fine sanding discs grain 000
1 x	Microfibre cloth
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Super-fine sanding discs grain 2000
1 x	Super-fine sanding discs grain 400
1 x	Replacement belts for BSL 220/E
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Replacement carving blades for MSG
1 x	Replacement belts for BSL 220/E
1 x	Replacement belts for BSL 220/E
1 x	Professional polishing sponge
1 x	Multiform grindstone
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Tungsten tipped saw blade
1 x	Saw blade made of high-alloy special steel
1 x	Crosscut 'Super-Cut' blade
1 x	Solid carbide saw blade
1 x	Lambswool polishing disc
1 x	Professional set for finish grinding and polishing
1 x	Polishing felt, medium hard
1 x	Replacement belts for BSL 220/E
1 x	Diamond blade

€1,982.02