Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 12/E
Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E	Spare cutting wire

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Corundum bound cutting disc for LWS
1 x	Tungstein carbide rasp - and cutting disc
1 x	Super-fine sanding discs grain 2000
1 x	Professional polishing sponge
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Tungsten Carbide Tipped (TCT)
1 x	Special Fused Alumina (Hardness N).
2 x	Backing disc for LWS
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Grinding mop cylinder grit 80
1 x	Core box bit 3.2mm
1 x	Corundum fan sander for LWS
1 x	Edge cutter with pin 6.4mm
1 x	MICROMOT Mains Adapter NG 2/E
1 x	V-slot cutter 6.5mm
1 x	IC Test clip 20 pins
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Combi cutter 6.5/2.5mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Sanding fleece for LWS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Slot cutter 6.5mm
1 x	Blade holders for DS 460
1 x	Half round cutter 13mm
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Rebating cutter 6.4mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Super-fine sanding discs grain 400
1 x	Cutting disc, with reinforcement
1 x	Sanding fleece for LWS
1 x	Diamond-coated cutting disc for MIC
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Diamond-coated cutting and roughing disc
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	DIL28/PLCC28 ZIF
1 x	Universal polishing paste
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x
1 x	Microfibre cloth
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	10-piece wood router cutter set
1 x	Slot cutter 3.2mm
1 x	Corundum sanding discs for LWS
1 x	Slot cutter 5.0mm
1 x	Footswitch FS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Rounding over cutter 6.4mm
1 x	Pinça SOIC de 8 pinos

€567.44