Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 230/E
MICROFLAME burner MFB/E	Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Inspector mirror
1 x	Steel wheels
1 x	Professional set for finish grinding and polishing
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	SCLCR1010E06
1 x	Tungsten carbide drills Ø1,5mm
1 x	Fluted filter for CW-matic
2 x	Router base OFV
1 x	Broca de ponto 3.15 x 1.25
1 x	surface planing and thicknessing ADH 200
1 x	Universal holder UHZ
2 x	Fibre-Cut Discs
1 x	HSS drill bits 0.8mm
1 x	Wheels brushes
1 x	Vacum SAA 901
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Diamond Cutting Discs
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Steel cups
1 x	Cutting disc, with reinforcement
1 x	Corundum fan sander for LWS
1 x	Diamond-coated cutting and roughing disc
1 x	Stainless steel brushes
1 x	Engraving tool GG
1 x	sanding belts for BBS/s Grit 150
1 x	Screwdriver bit set. 49-piece.
2 x	Fibre-Cut Discs
1 x	HSS drill bits 1.2mm
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Grinding mop cylinder grit 80
1 x	Machine Vice MS 4
1 x	Grinding mop cylinder grit 120
1 x	Insert CCGT060202-AK
1 x	Tungsten carbide drills Ø2mm
1 x	Complete Engraving Kit with trial glass
2 x	Diamond Cutting Discs
1 x	Table Saw TKS 2500 SC
1 x	HSS twist drill set to DIN 338
1 x	MICRO-screwdrivers
1 x	High quality corundum grinding bits
1 x	MICRO Heat gun MH 550
1 x	Tungsten carbide drills Ø1mm
1 x	MICROFLAME burner MFB/E
1 x	Tungsten Carbide Tipped (TCT)
1 x	HSS drill bits 0.5mm
1 x	Fibre-Cut Discs
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	MICROFLAM gas soldering set MGS
1 x	Diamond Coated
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Wood Lathe DB450
1 x	ESD Brushe
1 x	Super safety and specialty bit set, 75-piece
1 x	sanding belts for BBS/s Grit 240
1 x	HSS twist drill set with centring pin
1 x	Grinding mop cylinder grit 240
1 x	Insert CCGT120404-AK
1 x	Step clamps made of steel
1 x	Tungstein carbide rasp - and cutting disc
1 x	Super-Cut
1 x	Three jaw chuck for the lathe DB 250
1 x	Cups brushes
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	HSS drill bits 1.0mm
1 x	Fibre-Cut Discs
1 x	Stainless steel cups
1 x	MICROMOT glue gun HKP 220
1 x	magnetic base 80kg
1 x	Diamond Cutting Discs
1 x	Fibre-Cut Discs
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	High quality corundum grinding bits
1 x	Five piece HSS chisel set
1 x	Tungsten carbide cutters set
1 x	Super-fine sanding discs grain 000
1 x	Belt sander BBS/S
1 x	Chuck for TBM 220
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	broca de alta duração de 0,2mm
1 x	BIT-SET
1 x	Grinding mop cylinder grit 120
1 x	Universal and oil siphoning pump AP 12
1 x	Conjunto de três brocas de ponto

€4,793.90