€30.89 + VAT

MICROMOT 50/E
[28510]

MICROMOT 50/E

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/E

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 .

Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm are supplied.

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Customers who bought this product also purchased
Metal Cutting Blades
Metal Cutting Blades
Precision Vice FMZ
Precision Vice FMZ
MICROMOT Mains Adapter NG 2/S
MICROMOT Mains Adapter NG 2/S
Manufacturers
2 x Brass contact cleaner brush
1 x Round nose pliers 45º EUROline-Conductive
1 x Snipe nose pliers 45º EUROline-Conductive
2 x 6-piece screwdriver set ESD
1 x Flat nose pliers 45º EUROline-Conductive
1 x ESD-handling ser 9-361
3 x BIT-SET
1 x Cross-recess Screwdrivers 0
1 x Snipe nose pliers 45º EUROline-Conductive
2 x 6-piece wrench key set ESD
2 x ACCENT SERVICE TOOLS SET
1 x ESD-handling set
2 x 6-piece set of ESD/EGB tweezers
1 x 6-piece socket wrenches ESD
2 x 6-piece TORX-screwdriver-set ESD
2 x 6-piece screwdriver and cross-recess set ESD
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Socket Wrenches 2.0
1 x Socket Wrenches 2.5
1 x Socket Wrenches 5.5
1 x Socket Wrenches 1.5
1 x Socket Wrenches 3.5
1 x Wrench Keys 1.3
1 x Wrench Keys 0.7
1 x Wrench Keys 1.5
1 x Socket Wrenches 3.0
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Socket Wrenches 5.0
1 x Socket Wrenches 4.0
1 x Socket Wrenches 4.5
1 x Socket Wrenches 3.2
1 x Wrench Keys 0.9
1 x Screwdriver 4.0
1 x Screwdriver 1.8
1 x Screwdriver 3.0
1 x Cross-recess Screwdrivers 1
1 x Cross-recess Screwdrivers 2
1 x Cross-recess Screwdrivers 2
1 x Cross-recess Screwdrivers 00
1 x Screwdriver 2.5
1 x Screwdriver 5.5
1 x Screwdriver 5.5
1 x Cross-recess Screwdrivers Pozidriv 2
1 x Cross-recess Screwdrivers 1
1 x Cross-recess Screwdrivers Pozidriv 1
1 x Screwdriver 2.0
1 x Screwdriver 0.8
1 x Screwdriver 1.2
1 x Cross-recess Screwdrivers 000
1 x Mini side cutters EUROline-Conductive
1 x Side cutters EUROline-Conductive
1 x Mini side cutters EUROline-Conductive
1 x CRIMPING PLIERS/WIRE STRIPPER
1 x End side cutters 45º EUROline-Conductive
1 x Wood Lathe DB900
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x Mini side cutters EUROline-Conductive
2 x Cutter head for copy and surface milling MT2
1 x Turning inserts CCMT09T304
1 x End milling cutter kit HSS 20 pcs
2 x lathe tools 12mm
3 x lathe tools 10mm
2 x End milling cutter kit HSS 12 pcs
1 x OPTI BF20 VARIO
2 x Cutter head for copy and surface milling MT3
1 x OPTI BF20L VARIO
3 x Cutting tool HM 20 mm
2 x lathe tools 8mm
1 x Threading inserts 60º
3 x Cutting tool 16 mm
3 x Cutting tool 8 mm
1 x IT 150 - Indirect dividing attachment
1 x IT 200 - Indirect dividing attachment
2 x DCMT070204
1 x OPTI BF16 Vario
4 x Cutting tool 10 mm
1 x RT150 - Horizontal-vertical circular dividing table
2 x 3-jaw chuck centrically clamping 125mm
1 x TCMT090204
1 x Turning inserts VCMT070204
2 x quantum revolving center CM2
1 x Tool holder type H for SWH 1-A
3 x Lathe tools 10mm pastilhados
1 x quantum revolving center CM1
2 x TU 2004V
1 x Follow rest for D250X550
1 x RT100 - Horizontal-vertical circular dividing table
2 x Precision magnetic gauge stand
1 x Threading inserts 60º
1 x Collet chuck ER25 for D250X550
1 x Face clamping disc for D250X550
1 x SCMT060204
1 x precision machine vices FMS125
1 x Steady rest for D250X550
1 x Tool holder type D for SWH 1-A
1 x RT200 - Horizontal-vertical circular dividing table
1 x Quick-action tool holder kit SWH AA
1 x precision machine vices FMS150
2 x TU 1503V
1 x TCMT110204
2 x Morse taper MT2 - B16
1 x machine base with shelves for D250X550
2 x TU 2404
1 x precision machine vices FMS200
1 x Turning inserts SCMT09T304
1 x WCMT050308
1 x Turning inserts WCMX050308F
1 x Precision quick-action drill chuck 0-13mm B16
2 x 4-jaw chuck individually clamping 125mm
1 x SCMT09T304
1 x Lathe chuck flange for D250X550
1 x Threading inserts 60º
1 x Revolving center with replacement lathe centers
1 x Collet chuck ER32 for D250X550
1 x Lathe System PD 400
1 x SCLCR1010E06
1 x Precision lathe PD 250/E
1 x 4-jaw chuck individually clamping 80mm
1 x Boring Bar for DCMT 10mm
1 x 3-jaw chuck centrically clamping 160mm
1 x Parting tool 10mm
1 x centrically clamping 100mm
1 x Boring Bar for CCMT 16mm
1 x Boring Bar for CCMT
1 x 3-jaw chuck centrically clamping 80mm
1 x Boring Bar for CCMT 8mm
1 x sclcr2525M12
1 x Dial gauge
1 x Lathe tools 8mm pastilhados
1 x CM2 - B16 - M10
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Grinding mop cylinder grit 120
1 x Collet Set for accurate use on round components
1 x Polishing felt, medium hard
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Blade for Steel and brass
1 x Felt cloth polishing disc (100 x 15mm)
1 x Grinding mop cylinder grit 120
1 x Fine dust paper filter for CW-matic
1 x Sanding pads for OZI 220/E grit 240
1 x Fixed Steady
1 x Sanding pads for OZI 220/E grit 150
1 x Blade guides separately
1 x Lambswool polishing disc
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Microfibre cloth
1 x Super-fine sanding discs grain 2000
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Super-fine sanding discs grain 400
1 x Blade for Wood and Plastics
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Universal polishing paste
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x 
1 x HSS immersion saw blades for OZI
1 x Sanding pads for OZI 220/E grit 80
1 x Professional polishing sponge
1 x Precision caliper square
1 x HSS immersion saw blades for OZI
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Backing disc for LWS
1 x Fluted filter for CW-matic
1 x Radius Cutting Attachment, complete with pointed tool
1 x Diamond cutting blade for OZI
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Professional set for finish grinding and polishing
1 x Replacement cutting disc for MICRO cutter MIC
1 x Diamond blade for MBS 240/E
1 x Centre Turning Attachment
1 x Band knife of hardened spring band steel (without teeth)
1 x Tool holder for rotary tools
1 x Four Jaw Chuck
1 x Grinding mop cylinder grit 240
1 x HSS cutting blade for OZI
1 x Gear Chuck
1 x Diamond-coated cutting disc for MIC
1 x Grinding mop cylinder grit 80
1 x Super-fine sanding discs grain 000
1 x Belt sander BBS/S
1 x Precision steel vice PM 40
1 x Disc Sander TG 125/E
1 x Bench drill press TBH
1 x Polishing machine PM 100
1 x Replacement belts for BSL 220/E
1 x MICRO Miller MF 70
1 x Belt sander BS/E
1 x Pensander PS 13
1 x Replacement belts for BSL 220/E
1 x Replacement belts for BSL 220/E
1 x Professional Drill/Grinder IBS/E
€30,935.72
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook