€29.67 + VAT

MICROMOT 50/EF
[28512]

MICROMOT 50/EF

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design.  The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/EF

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Manufacturers
1 x Ball shaped milling cutters
2 x Belt sander BBS/S
2 x 10-piece wood router cutter set
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Sanding pads for OZI 220/E grit 80
1 x Three piece thread cutting set
1 x MICRO woodturning lathe DB 250
1 x Lathe System PD 400
2 x Tungsten Carbide Tipped (TCT)
1 x Aluminium Die-Cast
1 x Ball-shaped diamond coated 3.2mm
1 x Polishing machine PM 100
1 x Diamond cutting blade for OZI
1 x Cut off/mitre saw KGS 80
1 x Motor-driven carving device MSG
1 x HSS boring tool set, 6 pieces
1 x Thicknesser DH 40
1 x Scroll saw DS 230/E
2 x Bench Circular Saw KS 230
1 x Diamond Coated
1 x HSS immersion saw blades for OZI
1 x Long neck angle grinder LHW
1 x Blade for Steel and brass
1 x Solid carbide saw blade
1 x Delta sander OZI/E
1 x Ball-shaped diamond coated 2.2mm
1 x Surface planer AH 80
1 x Precision lathe PD 250/E
1 x Diamond blade
1 x Sanding pads for OZI 220/E grit 150
2 x Angle polisher WP/E
1 x Bench drill press TBH
1 x Cutting disc, with reinforcement
1 x Ball-shaped diamond coated 1.2mm
1 x Crosscut 'Super-Cut' blade
2 x 2-speed scroll saw DSH
1 x Disc Sander TG 125/E
1 x Band knife of hardened spring band steel (without teeth)
1 x Self-adhesive white corundum sanding discs for TG 125/E
2 x Belt sander BS/E
1 x Bench drill machine TBM 220
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x 
1 x Replacement cutting disc for MICRO cutter MIC
1 x Cutting tools of high quality cobalt HSS steel, ground
2 x Backing disc for LWS
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x MICRO cutter MIC
1 x Table Saw FET
1 x HSS immersion saw blades for OZI
1 x Disc Sander TG 250/E
1 x Diamond-coated cutting disc for MIC
1 x MICRO shaper MP 400
2 x Angle cutter 45 °
1 x Bandsaw blade of bimetal for MBS 240/E
1 x MICRO Band Saw MBS 240/E
1 x Saw blade made of high-alloy special steel
1 x Pensander PS 13
1 x Sanding pads for OZI 220/E grit 240
1 x Tungsten tipped saw blade
1 x 14-piece parallel supports set
1 x Grinding and Polishing Machine SP/E
1 x HSS cutting blade for OZI
1 x Super jig saw STS/E
1 x Super-Cut
1 x Jig saw STS 12/E
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Corundum fan sander for LWS
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x 6-piece screwdriver and cross-recess set ESD
1 x Half round cutter 13mm
1 x 6-piece wrench key set ESD
1 x Grinding mop cylinder grit 80
1 x Corundum grinding disc for LWS
2 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x ACCENT SERVICE TOOLS SET
1 x Hot wire cutter THERMOCUT 230/E
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x 6-piece TORX-screwdriver-set ESD
1 x Rounding over cutter 6.4mm
1 x Grinding mop cylinder grit 120
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x 6-piece socket wrenches ESD
1 x Grinding mop cylinder grit 240
1 x Diamond-coated cutting and roughing disc
1 x Coarse-toothed (25 TPI per 25mm)
1 x Slot cutter 5.0mm
1 x Edge cutter with pin 6.4mm
1 x Replacement carving blades for MSG
1 x Sanding fleece for LWS
1 x Hot wire cutter THERMOCUT 650
1 x 6-piece screwdriver set ESD
1 x sandpaper for PS 13 Grit 240
1 x broca de alta duração de 0,2mm
1 x Tungstein carbide rasp - and cutting disc
1 x sandpaper for PS 13 Grot 180
1 x Corundum bound cutting disc for LWS
1 x BIT-SET
1 x Micro Compound Table KT 70
1 x Slot cutter 3.2mm
1 x Coarse-toothed (18 TPI per 25mm)
1 x V-slot cutter 6.5mm
1 x Multiform grindstone
1 x Coarse-toothed (10 TPI per 25mm)
1 x Chuck for TBM 220
1 x Corundum sanding discs for LWS
1 x Hot wire cutter THERMOCUT 12/E
2 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Grinding mop cylinder grit 120
1 x Corundum fan sander for LWS
1 x Brass contact cleaner brush
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Core box bit 3.2mm
1 x sandpaper for PS 13 Grit 400
1 x Combi cutter 6.5/2.5mm
1 x Sanding fleece for LWS
1 x Blade holders for DS 460
1 x Slot cutter 6.5mm
1 x Corundum sanding discs for LWS
1 x Rebating cutter 6.4mm
1 x Corundum grinding disc for LWS
1 x MICRO Miller MF 70
1 x Precision drill grinder FBS 12/EF
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x MICROMOT 50/E
1 x Replacement belts for BSL 220/E
€10,439.83
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook