Top » Catalog » Micromot tools » Milling/Drilling Machines » 20165

€176.82 + VAT

Mill/Drill System BFW 40/E
[20165]

With controller for speeds of 900 - 6,000 rpm.

The triple ball bearing armature provides direct drive (no gearing). This yields virtually vibration-free operation and extremely high spindle accuracy. Aluminium die-cast head with spindle neck of 43 mm (European standard). Remainder of casing fibreglass reinforced NYLON. Large, easy to use switch with emergency function. Chart indicates optimum speeds for milling and drilling of various materials.

Complete with triple slit, hardened collets covering 2.35 - 3.0 - 3.2 - 4.0 - 5.0 - and 6.0 mm, as well as spanners.
Technical Data:

Control unit with full wave electronics for 220 - 240 V.
40 VDC secondary voltage.
Power consumption up to max. 250 W.
Spindle speed infinitely variable between 900 and 6,000 rpm.
Aluminium die-cast head with spindle neck of 43 mm (European standard).
Weight 4.2 kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Service Case->

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	ACCENT SERVICE TOOLS SET
1 x	Dial gauge
1 x	BIT-SET
1 x	Cutting tool 10 mm
1 x	3-jaw chuck centrically clamping 100mm
1 x	Cutting tool HM 20 mm
1 x	6-piece screwdriver and cross-recess set ESD
1 x	4-jaw chuck individually clamping 80mm
1 x	DCMT070204
1 x	centrically clamping 100mm
1 x	4-jaw chuck individually clamping 100mm
1 x	6-piece wrench key set ESD
1 x	Cutter head for copy and surface milling MT2
1 x	End milling cutter kit HSS 12 pcs
1 x	Cutting tool 8 mm
1 x	3-jaw chuck centrically clamping 160mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	Insulation Resistance Tester MG125
1 x	3-jaw chuck centrically clamping 80mm
1 x	CM2 - B16 - M10
1 x	6-piece screwdriver set ESD
1 x	Brass contact cleaner brush
1 x	Insulation Resistance Tester MG500
1 x	6-piece set of ESD/EGB tweezers
1 x	Cutting tool 16 mm
1 x	centrically clamping 125mm
1 x	4-jaw chuck individually clamping 125mm
1 x	Cutter head for copy and surface milling MT3
1 x	6-piece TORX-screwdriver-set ESD
1 x	6-piece socket wrenches ESD
1 x	Combi cutter 6.5/2.5mm
1 x	Mill/Drill Unit BFB 2000.
1 x	Spare cutting wire
1 x	Dividing attachment TA 230 for PF 250
1 x	Independent four jaw chuck for the DB 250
2 x	10-piece wood router cutter set
1 x	Half round cutter 13mm
1 x	Slot cutter 6.5mm
1 x	Core box bit 3.2mm
1 x	V-slot cutter 6.5mm
2 x	Precision steel vice PM 40
1 x	MICROMOT steel collet set
1 x	MICROMOT tool holder
1 x	MICROMOT extension cord. 300cm.
1 x	Flexishaft MICROMOT 110/BF
1 x	Rounding over cutter 6.4mm
2 x	Aluminium Die-Cast
2 x	Footswitch FS
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Angle cutter 45 °
1 x	Drill chuck with sliding sleeve for the tailstock
2 x	14-piece parallel supports set
1 x	Three jaw chuck for the lathe DB 250
1 x	Slot cutter 5.0mm
1 x	Slot cutter 3.2mm
1 x	Step clamps made of steel
2 x	Three-jaw steel drill chuck
1 x	Silicon-Carbide.
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Machine Vice MS 4
1 x	Protective device for hand-operated MICROMOT
1 x	Polishing Set
1 x	Special Fused Alumina (Hardness N).
2 x	Micro Compound Table KT 70
1 x	MICROMOT drill stand MB 200
1 x	Tungsten carbide cutters set
1 x	Rebating cutter 6.4mm
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Five piece HSS chisel set
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Flexishaft MICROMOT 110/P
1 x	Edge cutter with pin 6.4mm
1 x	Engraving tool GG
1 x	MICROFLAME burner MFB/E
1 x	Professional set for finish grinding and polishing
1 x	Precision Vice FMS 75
1 x	Universal and oil siphoning pump AP 12
1 x	Diamond blade for MBS 240/E
1 x	Multipurpose Vices Primus100
1 x	HSS immersion saw blades for OZI
1 x	Super-fine sanding discs grain 000
1 x	MICROMOT glue gun HKP 220
1 x	HSS immersion saw blades for OZI
2 x	Blade for Steel and brass
1 x	MICRO Heat gun MH 550
1 x	Microfibre cloth
2 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Polishing felt, medium hard
1 x	Sanding pads for OZI 220/E grit 150
1 x	Screwdriver bit set. 49-piece.
1 x	Super-fine sanding discs grain 400
1 x	Diamond cutting blade for OZI
1 x	Multipurpose Vices Primus 75
1 x	Super-fine sanding discs grain 2000
1 x	Professional polishing sponge
1 x	Sanding pads for OZI 220/E grit 80
1 x	MICROFLAM gas soldering set MGS
1 x	Super safety and specialty bit set, 75-piece
1 x	Router base OFV
1 x	sanding belts for BBS/s Grit 240
1 x	Complete Engraving Kit with trial glass
2 x	Band knife of hardened spring band steel (without teeth)
1 x	Universal holder UHZ
1 x	sanding belts for BBS/s Grit 80
1 x	Precision Vice FMZ
1 x	Blade for Wood and Plastics
1 x	HSS cutting blade for OZI
1 x	Compact workshop vacuum cleaner CW-matic
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	MICRO-screwdrivers
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Blade guides separately
1 x	Chuck for TBM 220
1 x	sanding belts for BBS/s Grit 150
2 x	Backing disc for LWS
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Sanding pads for OZI 220/E grit 240
1 x	Lambswool polishing disc
1 x	Ball-shaped diamond coated 3.2mm
1 x	Tungsten Carbide Tipped (TCT)
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICRO Miller FF 500
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	MICROMOT Mains Adapter NG 2/E
1 x	MICRO Miller FF 230
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	2-speed scroll saw DSH
1 x	Mill/Drill System BFW 40/E
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Coarse-toothed (25 TPI per 25mm)
2 x	MICROMOT Mains Adapter NG 2/S
1 x
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Ball-shaped diamond coated 2.2mm
1 x	MICROMOT 50
1 x	Precision drill grinder FBS 12/EF
1 x	Professional Drill/Grinder IBS/E
1 x	Long neck straight drill/grinder LB/E
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Blade holders for DS 460
1 x	MICRO Miller MF 70
1 x	Ball-shaped diamond coated 1.2mm
2 x	Bench drill press TBH
1 x	Cutting disc, with reinforcement
1 x	Morse taper MT2 - B16
1 x	Long neck angle milling/drilling unit LWB 220/E
2 x	Bench drill machine TBM 220
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Belt sander BBS/S
1 x	Belt sander BS/E
1 x	Angle polisher WP/E
1 x	MICROMOT 50/EF
1 x	Precision Drill/Grinder FBS 240/E
1 x	Coarse-toothed (18 TPI per 25mm)

€11,793.81