€29.67 + VAT

MICROMOT 50/EF
[28512]

MICROMOT 50/EF

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design.  The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/EF

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Manufacturers
2 x PLCC Extractor
1 x Collet Set for accurate use on round components
2 x PLCC Puller
1 x Silicon-Carbide.
1 x Flat nose pliers 185mm
1 x Centre Turning Attachment
1 x MICROMOT glue gun HKP 220
1 x Diamond-coated cutting disc for MIC
2 x IC Test clip 20 pins
1 x Hand magnifier with LED light 3X
1 x Side cutters 170mm
1 x IC tweezers
1 x Telephone pliers stright 165mm
1 x Combination pliers 170mm
1 x Round nose pliers 185mm
1 x Hot wire cutter THERMOCUT 12/E
1 x Hot wire cutter THERMOCUT 650
1 x Side cutters 160mm
2 x Self-adhesive silicone film for easy sanding disc replacement
3 x Broca de alta duração de 0.7mm
1 x Super-fine sanding discs grain 2000
1 x OPTI BF20 VARIO
1 x Super safety and specialty bit set, 75-piece
1 x VASELINE 200ml
2 x Broca de alta duração de 1.0mm
1 x Screwdriver bit set. 49-piece.
1 x Cutting disc, with reinforcement
2 x OPTI BF16 Vario
1 x Pinça SOIC de 8 pinos
1 x Lambswool polishing disc
2 x Broca de alta duração de 2.5mm
1 x Universal and oil siphoning pump AP 12
3 x OPTI BF20L VARIO
1 x Precision quick-action drill chuck 0-8mm B16
1 x centrically clamping 100mm
1 x Backing disc for LWS
1 x Microfibre cloth
1 x Tungsten Carbide Tipped (TCT)
1 x centrically clamping 125mm
2 x Professional polishing sponge
2 x Antiallergical Tweezers 5-155-1
1 x Broca de alta duração de 1.3mm
1 x Titan Tweezers 5-037
1 x Antiallergical Tweezers 5-121-1
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Morse taper MT3 - B16
1 x 4-jaw chuck individually clamping 125mm
1 x 6pcs Double Open End wrench set
1 x Precision quick-action drill chuck 0-16mm B16
3 x Polishing felt, medium hard
2 x Broca de alta duração de 0.3mm
1 x PROLUB 200ml
2 x Broca de alta duração de 2.0mm
1 x Broca de alta duração de 0.9mm
1 x 4-jaw chuck individually clamping 80mm
2 x Broca de alta duração de 2.4mm
3 x Broca de alta duração de 1.1mm
2 x Super-fine sanding discs grain 400
1 x SPRAYOIL 200ml
1 x Broca de alta duração de 0.5mm
1 x Titan Tweezers 5-035
1 x 3-jaw chuck centrically clamping 160mm
1 x TOP-PIN 200ml
1 x 4-jaw chuck individually clamping 100mm
1 x Professional set for finish grinding and polishing
1 x 3-jaw chuck centrically clamping 100mm
1 x Titan Tweezers 5-036
1 x Broca de alta duração de 1.2mm
2 x Antiallergical Tweezers 5-107-1
2 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x broca de alta duração de 0,6mm
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Precision quick-action drill chuck 0-13mm B16
1 x Precision magnetic gauge stand
1 x Super-fine sanding discs grain 000
2 x Broca de alta duração de 2.1mm
1 x Broca de alta duração de 2.6mm
1 x Component tweezers 5-009
1 x Flexishaft MICROMOT 110/P
1 x Broca de alta duração de 2.2mm
2 x Broca de alta duração de 0.8mm
1 x Broca de alta duração de 2.3mm
1 x Flexishaft MICROMOT 110/BF
1 x Antiallergical Tweezers 5-117-1
1 x broca de alta duração de 0,2mm
1 x Replacement glue sticks for HKP 220
1 x MICROMOT tool holder
1 x Three-jaw steel drill chuck
2 x Broca de alta duração de 0.4mm
€12,473.86
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook