Earth wire with dummy Schunko-plug, Oficina-digital.com

Top » Catalog » ESD Tools » ESD bracelet and accessories » 9-359

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
ESD Tools->
  ESD bracelet and accessories
  ESD Brushes
  ESD Tool set
  ESD workbench pad
  ESD/EGB electronics Screwdrivers->
  ESD/EGB TWEEZERS
  EUROline-Conductive pliers
  Floor cover ESD
  Screwdrivers set ESD
  Severals
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Service Case->
Torque Screwdriver

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

4 x	surface planing and thicknessing ADH 200
1 x	Fixed Steady
3 x	Coarse-toothed (18 TPI per 25mm)
4 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	HSS immersion saw blades for OZI
1 x	Bench drill press TBH
4 x	Grinding mop cylinder grit 120
2 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Cutting tool HM 20 mm
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Silicon-Carbide.
2 x	DIL48/TSOP56 ZIF 18.4mm Flash-1
2 x	Felt cloth polishing disc (100 x 15mm)
1 x	Lathe tools 10mm pastilhados
3 x	Grinding mop cylinder grit 120
1 x	Lathe tools 8mm pastilhados
3 x	Grinding mop cylinder grit 80
2 x	Microfibre cloth
4 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Cutting tool 16 mm
4 x	Table Saw TKS 2500 SC
6 x	Table Sawr TKS 315 E
1 x	Cutting tool 8 mm
2 x	lathe tools 10mm
2 x	Microfibre polishing wheel, 15-ply (100mm)
4 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Cutting tool 10 mm
2 x	Grinding mop cylinder grit 240
3 x
1 x	Bandsaw blade of bimetal for MBS 240/E
4 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Belt sander BBS/S
3 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	lathe tools 12mm
2 x	Diamond Twist Drills
2 x	Diamond-coated cutting and roughing disc
2 x	Backing disc for LWS
2 x	Diamond Cutting Discs
1 x	Professional polishing sponge
1 x	DIL3/SOT23-3 ZIF-CS
1 x	Super-fine sanding discs grain 2000
1 x	Diamond Cutting Discs
3 x	Professional set for finish grinding and polishing
1 x	DIL8/SOIC8 ZIF 200mil
2 x	DIL20/SOIC20 ZIF 200mil
3 x	Flexishaft MICROMOT 110/BF
3 x	Flexishaft MICROMOT 110/P
1 x	Ball-shaped diamond coated 3.2mm
2 x	Dividing attachment TA 230 for PF 250
2 x	Footswitch FS
1 x	Ball-shaped diamond coated 1.2mm
3 x	Micro Compound Table KT 70
1 x	Lambswool polishing disc
3 x	Protective device for hand-operated MICROMOT
4 x	Three-jaw steel drill chuck
1 x	Diamond Grinding Bits 5mm
1 x	DIL8W/SOIC8 ZIF 200mil
2 x	Slot cutter 3.2mm
1 x	Super-fine sanding discs grain 400
1 x	DIL48/SOIC20 ZIF LPC-1
2 x	Diamond Cutting Discs
2 x	Diamond Grinding Bits 1,8mm
1 x	Super-fine sanding discs grain 000
2 x	Sanding pads for OZI 220/E grit 240
2 x	Diamond Cutting Discs
3 x	Aluminium Die-Cast
3 x	Mill/Drill Unit BFB 2000.
1 x	DIL24W/SOIC24 ZIF 300mil
1 x	DIL8W/SOIC8 ZIF 150mil
2 x	Diamond Grinding Bits 1mm
1 x	MICROFLAM gas soldering set MGS
1 x	DIL8/SOIC8-1 ZIF 170mil
2 x	sandpaper for PS 13 Grot 180
2 x	MICROMOT tool holder
1 x	DIL32/SOIC32 ZIF 445mil
2 x	MICROMOT drill stand MB 200
1 x	sandpaper for PS 13 Grit 400
2 x	Self-adhesive white corundum sanding discs for TG 250/E
2 x	Replacement belts for BSL 220/E
1 x	Diamond Grinding Bits 1,8mm
1 x	Collet Set for accurate use on round components
2 x	14-piece parallel supports set
1 x	DIL28W/SOIC28 ZIF 300mil
5 x	Multiform grindstone
1 x	Stainless steel cups
2 x	MICROMOT Mains Adapter NG 2/E
4 x	Replacement carving blades for MSG
1 x	MICROMOT steel collet set
3 x	TCMT090204
3 x	SCMT060204
2 x	Universal polishing paste
3 x	CM2 - B16 - M10
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Boring Bar for CCMT
2 x	Flexible silicon discs
2 x	Self-adhesive white corundum sanding discs for TG 125/E
3 x	WCMT050308
3 x	Three jaw chuck for the lathe DB 250
1 x	sclcr2525M12
2 x	MICROMOT Mains Adapter NG 5/E
1 x	SCLCR1010E06
1 x	Parting tool 10mm
1 x	Four Jaw Chuck
1 x	High quality corundum grinding bits
1 x	Boring Bar for CCMT 16mm
1 x	Boring Bar for DCMT 10mm
1 x	DIL48/TSOP48 ZIF 18.4mm
2 x	MICROMOT extension cord. 300cm.
3 x	MICROMOT Mains Adapter NG 2/S
3 x	DCMT070204
3 x	TCMT110204
1 x	Grinding and Polishing Machine SP/E
3 x	Tungsten Carbide Tipped (TCT)
1 x	Slot cutter 5.0mm
2 x	Rebating cutter 6.4mm
2 x	Slot cutter 6.5mm
2 x	Replacement belts for BSL 220/E
2 x	10-piece wood router cutter set
1 x	Half round cutter 13mm
1 x	Rounding over cutter 6.4mm
2 x	surface planing and thicknessing ADH 250
1 x	V-slot cutter 6.5mm
1 x	Cutting disc, with reinforcement
1 x	Combi cutter 6.5/2.5mm
2 x	Edge cutter with pin 6.4mm
1 x	Replacement belts for BSL 220/E
1 x	sanding belts for BBS/s Grit 150
2 x	Core box bit 3.2mm
2 x	Jig saw blades made of HSS
2 x	Chuck for TBM 220
2 x	sanding belts for BBS/s Grit 240
3 x	Angle cutter 45 °
2 x	Self-adhesive silicone film for easy sanding disc replacement
2 x	Replacement belts for BSL 220/E
1 x	quantum revolving center CM1
3 x	ESD Brushe
3 x	quantum revolving center CM2
1 x	Bottom PSOP44 NOR-2
1 x	DIL8/SOIC8 ZIF MB95-1
1 x	DIL40/SOIC20 ZIF MB95-1
1 x	DIL40/SOIC16 ZIF MB-1
1 x	Fibre-Cut Discs
2 x	Coarse-toothed (25 TPI per 25mm)
1 x	Sanding Drums
2 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
3 x	Blade holders for DS 460
2 x	Diamond-coated cutting disc for MIC
1 x	Router base OFV
1 x	Corundum sanding discs for LWS
1 x	Top PSOP44 ZIF 600mil
3 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Sanding bands 14x13mm
1 x	Brass brushes
1 x	Precision quick-action drill chuck 0-16mm B16
1 x	Sanding pads for OZI 220/E grit 80
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	HSS immersion saw blades for OZI
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	High quality corundum grinding bits
1 x	3-jaw chuck centrically clamping 100mm
1 x	3-jaw chuck centrically clamping 80mm
1 x	Sanding pads for OZI 220/E grit 150
2 x	Replacement glue sticks for HKP 220
1 x	DIL48/TSOP56 ZIF 18.4mm NOR-4
1 x	Diamond Coated
1 x	Fibre-Cut Discs
2 x	Diamond cutting blade for OZI
2 x	Precision quick-action drill chuck 0-13mm B16
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	3-jaw chuck centrically clamping 160mm
1 x	Super-Cut
1 x	Belt sander BS/E
1 x	High quality corundum grinding bits
1 x	Multipurpose Vices Primus 75
1 x	High quality corundum grinding bits
1 x	Milling cutter set (2 - 5mm)
2 x	HSS cutting blade for OZI
1 x	Long neck angle grinder LHW
2 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	DIL48/PLCC52 ZIF-CS 68HC05BX
1 x	DIL16/SOIC16-1 ZIF 170mil
1 x	Fluted filter for CW-matic
1 x	Insert CCGT060202-AK
1 x	High quality corundum grinding bits
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
3 x	Five piece HSS chisel set
1 x	Morse taper MT3 - B16
1 x	DIL16W/SOIC16 ZIF 150mil
1 x	DIL18W/SOIC18 ZIF 300mil
2 x	SCMT09T304
1 x	Hot wire cutter THERMOCUT 12/E
1 x	DIL28/PLCC84 ZIF HS538ESC01H
2 x	Independent four jaw chuck for the DB 250
2 x	4-jaw chuck individually clamping 125mm
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	Insert CCGT120404-AK
1 x	Corundum sanding discs for LWS
1 x	DIL14W/SOIC14 ZIF 150mil
2 x	centrically clamping 125mm
1 x	Compact workshop vacuum cleaner CW-matic
1 x	DIL48/PLCC84 ZIF 68HC11
2 x	Drill chuck with sliding sleeve for the tailstock
1 x	centrically clamping 100mm
1 x	4-jaw chuck individually clamping 100mm
1 x	4-jaw chuck individually clamping 80mm
2 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	DIL48/PLCC52 ZIF-CS 68HC11
1 x	DIL20W/SOIC20 ZIF 300mil
2 x	Polishing paste
1 x	DIL40/TQFP52 ZIF EM652X
2 x	DIL40/TQFP80-1 ZIF PIC-1A
1 x	Turning inserts VCMT070204
1 x	DIL32/TSOP32 ZIF 18.4mm Flash
1 x	Threading inserts 60º
1 x	Turning inserts SCMT09T304
1 x	Threading inserts 60º
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Turning inserts CCMT060204
1 x	Table Saw FET
1 x	DIL32/TSOP32 ZIF 11.8mm
1 x	Threading inserts 60º
1 x	Turning inserts WCMX050308F
2 x	Insert LGTN-3
3 x	Cotton polishers
1 x	Insert LGTN-2
1 x	Turning inserts CCMT09T304
1 x	Flexible silicon discs
1 x	6-piece socket wrenches ESD
2 x	6-piece screwdriver and cross-recess set ESD
1 x	BGA-Bottom-101
1 x	Felt polishers
2 x	6-piece TORX-screwdriver-set ESD
2 x	Hand magnifier with LED light 3X
1 x	DIL44/SOIC44 ZIF-CS
1 x	Set of precision cutters
1 x	ESD Tweezers 5-195
2 x	6-piece wrench key set ESD
1 x	ESD Tweezers 5-194
1 x	Felt polishers
1 x	DIL40/TQFP64 ZIF PIC-1A
1 x	Cotton polishers
1 x	ESD Tweezers 5-191
1 x	Conj 5 pinças ESD
2 x	ESD Tweezers 5-192
1 x	Flexible silicon discs
1 x	Cotton polishers
1 x	Flexible polishing pad set
1 x	Flexible polishing pad set
1 x	PLCC Puller
1 x	Felt polishers
1 x	DIL48/TQFP100-2 ZIF PLD-1
2 x	Follow rest for D250X550
1 x	Felt polishers
1 x	6-piece screwdriver set ESD
1 x	6-piece set of ESD/EGB tweezers
1 x	BGA-0245/0243
1 x	MICRO shaper MP 400
1 x	Steady rest for D250X550
1 x	Earthing module
1 x	Contact bracelet with spiral cord
1 x	Collet chuck ER32 for D250X550
1 x	Milling cutter set (6 - 10mm)
1 x	Tool holder type H for SWH 1-A
1 x	Earth wire with dummy Schunko-plug
2 x	Earth wire
1 x	Crocodile clip
1 x	machine base with shelves for D250X550

€32,363.68