€7.30 + VAT

FREEZER-TOP 200ml
[1301412]

FREEZER-TOP 200ml

Quickly Tracks Thermal Intermittents, Cools Down to -50° C.

  • FREEZER-TOP is CFC-free.
  • It ensures reliable cooling down to -50° C.
  • It quickly locates thermal intermittent components due to heat induces failure.
  • The product is chemically pure, nonflammable and evaporates immediately without leaving residue.

Application:

  • Low temperature testing of electronic systems and heat-sensitive components such as ICs, transistors, diodes, resistors, capacitors and other defective components.
  • Also suitable for heat sink protection of electronic components during soldering or desoldering.
  • Low temperature testing of electromechanical systems and electronic circuits.
  • Location of hairline cracks in printed circuit boards.

Technical Data:

 

Density: 1.08 g / cm³
Evaporation: complete
Temperature obtained:  -50° C
Flash point: none
ODP: 0.00
Reviews

Customers who bought this product also purchased
BeeProg2
BeeProg2
Manufacturers
1 x Earth wire
1 x DIL20W/SOIC20 ZIF 300mil
1 x DIL16W/SOIC16 ZIF 300mil
1 x DIL20/SOIC20 ZIF 300 mil
2 x Safety insulated screwdrivers 14-608 VDE
2 x Safety insulated screwdrivers 14-602 VDE
1 x DIL24/TSSOP24 ZIF 170mil
1 x DIL24/QSOP24 ZIF 150mil
1 x DIL16/SOIC16-1 ZIF 170mil
1 x Safety Insulated Pozidriv Screwdriver 14-644VDE
1 x DIL18W/SOIC18 ZIF 300mil
2 x Safety insulated screwdrivers 14-601 VDE
1 x DIL28/PLCC28 ZIF
1 x DIL20/SOIC20 ZIF 200mil
1 x DIL20W/PLCC20 ZIF
1 x Set of special steel cutters
1 x Cutting tool 16 mm
1 x Set of precision cutters
1 x BGA-0245/0242
1 x Rounding over cutter 6.4mm
1 x TORX-screwdrivers T4
1 x DCMT070204
1 x Flame shaped milling cutters
1 x DIL40/QFP64-4 ZIF NEC-1
1 x Slot cutter 6.5mm
1 x BGA-Bottom-102
1 x DIL28/QFP52 ZIF-CS SX52
1 x DIL40/QFP64-3 ZIF NEC-1
1 x Core box bit 3.2mm
1 x 3-jaw chuck centrically clamping 160mm
1 x Wolfram vanadium steel milling bits
1 x DIL40/QFP100 ZIF AVR-1
1 x CM2 - B16 - M10
1 x 4-jaw chuck individually clamping 100mm
1 x Angle cutter 45 °
1 x Diamond-coated cutting and roughing disc
1 x BGA-Bottom-125
1 x Cutting tool HM 20 mm
1 x Safety insulated screwdrivers 14-603 VDE
1 x Ball shaped milling cutters
1 x 4-jaw chuck individually clamping 80mm
1 x 3-jaw chuck centrically clamping 125mm
1 x 10-piece wood router cutter set
1 x TORX-screwdrivers T7
1 x Cutting tool 10 mm
1 x DIL40/QFP80 ZIF M37702
1 x 3-jaw chuck centrically clamping 100mm
1 x TORX-screwdrivers T5
1 x V-slot cutter 6.5mm
1 x Combi cutter 6.5/2.5mm
1 x Digital caliper gauge 300 mm
1 x DIL48/QFP100 ZIF PLD-3
1 x DIL40/QFP64-2 ZIF-CS NEC-1
1 x DIL48/QFP100 ZIF MB90F-1
1 x Tungsten carbide cutter 3.0mm
1 x BGA-Bottom-108
1 x 6pcs Double Open End wrench set
1 x DIL40/QFP64-1 ZIF-CS NEC-1
1 x Rebating cutter 6.4mm
1 x BGA-0246/0243
1 x BGA-Bottom-88
1 x 4-jaw chuck individually clamping 125mm
1 x DIL40/QFP144 ZIF H8S-1
1 x Cone shaped milling cutter
1 x BGA-0246/0244
1 x Cylinder shaped milling cutters
1 x BGA-0245/0241
1 x DIL40/QFP144 ZIF LPC-1
1 x BGA-Bottom-105
1 x Tungsten carbide cutters set
1 x DIL48/QFP100 ZIF PLD-4
1 x BGA-Bottom-111
1 x Tungsten carbide cutter 1.0mm
1 x DIL48/QFP100 ZIF PLD-1
1 x Precision magnetic gauge stand
1 x Slot cutter 3.2mm
1 x sandpaper for PS 13 Grit 400
1 x Edge cutter with pin 6.4mm
1 x BGA-Bottom-1
1 x BGA-Bottom-115
1 x Solid carbide stylus for engraving
1 x TORX-screwdrivers T8
1 x Cylindrical cutters
1 x DIL48/QFP100 ZIF PLD-2
1 x Safety insulated screwdrivers 14-604 VDE
1 x centrically clamping 100mm
1 x Socket Wrenches 3.5
1 x Socket Wrenches 2.5
1 x SCREEN 200ml
€9,082.37
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook