| 1 x | Centre Turning Attachment |
| 1 x | Round nose pliers 45º EUROline-Conductive |
| 1 x | Four Jaw Chuck |
| 2 x | Tungsten carbide drills Ø1mm |
| 2 x | Wrench Keys 2.5 |
| 2 x | Flexishaft MICROMOT 110/BF |
| 3 x | HSS drill bits 0.5mm |
| 2 x | HSS twist drill set to DIN 338 |
| 1 x | Mini side cutters EUROline-Conductive |
| 2 x | Safety Insulated Phillips Screwdriver 14-631VDE |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | Safety insulated screwdrivers 14-604 VDE |
| 1 x | Socket Wrenches 4.0 |
| 1 x | Safety Insulated Pozidriv Screwdriver 14-642VDE |
| 2 x | Tungsten carbide drills Ø1,5mm |
| 1 x | Safety insulated screwdrivers 14-606 VDE |
| 2 x | Milling cutter set (2 - 5mm) |
| 1 x | TORX-screwdrivers T4 |
| 2 x | MICROMOT steel collet set |
| 1 x | Safety Insulated Pozidriv Screwdriver 14-643VDE |
| 3 x | 14-piece parallel supports set |
| 1 x | Fixed Steady |
| 1 x | Flexishaft MICROMOT 110/P |
| 2 x | Milling cutter set (6 - 10mm) |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | MICRO shaper MP 400 |
| 3 x | MICROMOT drill stand MB 200 |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | Safety insulated screwdrivers 14-608 VDE |
| 1 x | Complete Engraving Kit with trial glass |
| 2 x | Metal Cutting Blades |
| 3 x | Diamond-coated cutting disc for MIC |
| 2 x | ESD Tweezers 5-191 |
| 4 x | Diamond Cutting Discs |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 2 x | Fibre-Cut Discs |
| 2 x | Diamond Grinding Bits 5mm |
| 2 x | ESD Tweezers 5-194 |
| 1 x | ACCENT SERVICE TOOLS SET |
| 3 x | Diamond Cutting Discs |
| 2 x | Fibre-Cut Discs |
| 1 x | Independent four jaw chuck for the DB 250 |
| 3 x | Conj 5 pinças ESD |
| 3 x | Diamond Twist Drills |
| 1 x | TIP SPT-3 |
| 1 x | MICRO Heat gun MH 550 |
| 1 x | TIP SPT-4 |
| 1 x | TIP SPT-6 |
| 1 x | MICROMOT glue gun HKP 220 |
| 1 x | Hot wire cutter THERMOCUT 230/E |
| 1 x | Component tweezers 5-013 |
| 2 x | Engraving tool GG |
| 1 x | ESD-handling ser 9-361 |
| 2 x | Diamond Grinding Bits 1,8mm |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 1 x | Fibre-Cut Discs |
| 1 x | Router base OFV |
| 2 x | MICROFLAME burner MFB/E |
| 2 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 2 x | ESD Tweezers 5-192 |
| 2 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | TIP SPT-9 |
| 2 x | Bench drill press TBH |
| 2 x | ESD Tweezers 5-193 |
| 1 x | Wrench Keys 2.0 |
| 1 x | TIP SPT-10 |
| 2 x | Ceramic-tipped tweezers and ESD 5-095 |
| 1 x | TIP SPT-2 |
| 1 x | Diamond Grinding Bits 1mm |
| 1 x | EUROline-Conductive set of pliers |
| 1 x | magnifier 3.25 x Ø 45mm with additional lens |
| 1 x | Universal holder UHZ |
| 2 x | Diamond Grinding Bits 1,8mm |
| 2 x | 6-piece set of ESD/EGB tweezers |
| 2 x | ESD Tweezers 5-195 |
| 4 x | Diamond Cutting Discs |
| 1 x | Belt sander BBS/S |
| 1 x | Wrench Keys 0.7 |
| 2 x | HSS drill bits 0.8mm |
| 1 x | Multipurpose Vices Primus100 |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | HSS twist drill set with centring pin |
| 3 x | High quality corundum grinding bits |
| 1 x | Safety Insulated Phillips Screwdriver 14-633VDE |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Sanding Drums |
| 1 x | Earth wire |
| 2 x | Precision steel vice PM 40 |
| 1 x | Super-fine sanding discs grain 2000 |
| 1 x | Fibre-Cut Discs |
| 1 x | Replacement carving blades for MSG |
| 2 x | Flexible polishing pad set |
| 1 x | Disc Sander TG 250/E |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | sandpaper for PS 13 Grit 240 |
| 1 x | Crosscut 'Super-Cut' blade |
| 2 x | Flexible silicon discs |
| 1 x | ESD-handling set |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Tungsten carbide cutters set |
| 2 x | HSS boring tool set, 6 pieces |
| 1 x | Cylindrical cutters |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 2 x | High quality corundum grinding bits |
| 1 x | MICROMOT tool holder |
| 1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 2 x | Professional set for finish grinding and polishing |
| 1 x | Fibre-Cut Discs |
| 2 x | Diamond-coated cutting and roughing disc |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Gear Chuck |
| 2 x | HSS drill bits 1.6mm |
| 2 x | Hot wire cutter THERMOCUT 12/E |
| 2 x | Flap Wheels |
| 2 x | Diamond blade |
| 2 x | High quality corundum grinding bits |
| 2 x | Diamond blade for MBS 240/E |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | Spiral blade. 125mm long with plain ends (without pins). |
| 1 x | Super safety and specialty bit set, 75-piece |
| 2 x | HSS immersion saw blades for OZI |
| 1 x | Fluted filter for CW-matic |
| 1 x | Sanding fleece for LWS |
| 1 x | Safety Insulated Phillips Screwdriver 14-634VDE |
| 1 x | Earthing module |
| 1 x | Five piece HSS chisel set |
| 1 x | Ceramic-tipped tweezers and ESD 5-096 |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | MICRO woodturning lathe DB 250 |
| 1 x | Footswitch FS |
| 1 x | Machine Vice MS 4 |
| 1 x | Flap Wheels |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Antiallergical Tweezers 5-121-1 |
| 1 x | Microfibre cloth |
| 1 x | Conjunto de três brocas de ponto |
| 2 x | Hot wire cutter THERMOCUT 650 |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Flexible silicon discs |
| 1 x | MICROMOT 230/E |
| 1 x | Half round cutter 13mm |
| 1 x | Multipurpose Vices Primus 75 |
| 1 x | MICROMOT 50/EF |
| 1 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | Sanding Discs |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | Grinding and Polishing Machine SP/E |
| 1 x | Cross-recess Screwdrivers Pozidriv 1 |
| 1 x | High quality corundum grinding bits |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Sanding bands 14x13mm |
| 2 x | HSS drill bits 1.0mm |
| 1 x | Saw blade made of high-alloy special steel |
| 1 x | Thicknesser DH 40 |
| 1 x | Polishing machine PM 100 |
| 1 x | Delta sander OZI/E |
| 2 x | Diamond Coated |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | MICROMOT 50 |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 2 x | sandpaper for PS 13 Grot 180 |
| 1 x | MICRO-screwdrivers |
| 1 x | Super-Cut |
| 1 x | Super-fine sanding discs grain 000 |
| 1 x | Polishing Set |
| 1 x | Corundum sanding discs for LWS |
| 2 x | Flexible silicon discs |
| 1 x | Jig saw blades made of HSS |
| 2 x | HSS cutting blade for OZI |
| 1 x | Solid carbide saw blade |
| 2 x | Flexible polishing pad set |
| 1 x | Nylon Fleece Brushes |
| 1 x | Tungsten Carbide Tipped (TCT) |
| 2 x | High quality corundum grinding bits |
| 1 x | MICROMOT 50/E |
| 1 x | Sanding fleece for LWS |
| 1 x | Screwdriver bit set. 49-piece. |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | High quality corundum grinding bits |
| 2 x | HSS immersion saw blades for OZI |
| 1 x | Grinding mop cylinder grit 80 |
| 1 x | Backing disc for LWS |
| 1 x | Three piece thread cutting set |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | Corundum grinding disc for LWS |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 2 x | lathe tools 10mm |
| 3 x | Hand Magnifier 2-293 |
| 1 x | Follow rest for D250X550 |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | sclcr2525M12 |
| 2 x | Plastic magnifying glass |
| 1 x | HSS drill bits 1.2mm |
| 1 x | Tool holder type D for SWH 1-A |
| 4 x | Cutting tool 10 mm |
| 1 x | Tool holder type H for SWH 1-A |
| 1 x | Morse taper MT2 - B16 |
| 1 x | Lathe tools 10mm pastilhados |
| 1 x | SCLCR1010E06 |
| 1 x | Cutting tool 16 mm |
| 1 x | Lathe chuck flange for D250X550 |
| 1 x | 3-jaw chuck centrically clamping 125mm |
| 1 x | Lathe tools 8mm pastilhados |
| 1 x | Precision quick-action drill chuck 0-13mm B16 |
| 1 x | lathe tools 12mm |
| 1 x | Parting tool 10mm |
| 1 x | Collet chuck ER25 for D250X550 |
| 1 x | Face clamping disc for D250X550 |
| 1 x | Collet chuck ER32 for D250X550 |
| 2 x | 4-jaw chuck individually clamping 125mm |
| 1 x | Cutting tool HM 20 mm |
| 1 x | TORX-screwdrivers T10 |
| 1 x | centrically clamping 125mm |
| 1 x | Boring Bar for DCMT 10mm |
| 1 x | High quality corundum grinding bits |
| 1 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | Steady rest for D250X550 |
| 1 x | Quick-action tool holder kit SWH AA |
| 1 x | Cutting tool 8 mm |
| 1 x | machine base with shelves for D250X550 |
| 1 x | lathe tools 8mm |
| 1 x | Slot cutter 6.5mm |
| 1 x | Rebating cutter 6.4mm |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | 3-jaw chuck centrically clamping 80mm |
| 1 x | centrically clamping 100mm |
| 1 x | DCMT070204 |
| 1 x | End milling cutter kit HSS 12 pcs |
| 1 x | 4-jaw chuck individually clamping 100mm |
| 1 x | TU 1503V |
| 1 x | Dial gauge |
| 1 x | 4-jaw chuck individually clamping 80mm |
| 1 x | TU 2404 |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Cutter head for copy and surface milling MT2 |
 |
| €15,702.50 |
