| 1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
| 3 x | Earth wire |
| 3 x | Earthing module |
| 3 x | Earth wire |
| 3 x | Contact bracelet with spiral cord |
| 3 x | Earth wire with dummy Schunko-plug |
| 3 x | Crocodile clip |
| 1 x | Super-Cut |
| 3 x | ACCENT SERVICE TOOLS SET |
| 2 x | Tungsten Carbide Tipped (TCT) |
| 1 x | Diamond Coated |
| 2 x | Precision magnetic gauge stand |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Corundum grinding disc for LWS |
| 2 x | Micro Compound Table KT 70 |
| 1 x | Router base OFV |
| 1 x | TORX-screwdrivers T10 |
| 1 x | Machine Vice MS 4 |
| 1 x | MICROMOT glue gun HKP 220 |
| 1 x | Sanding fleece for LWS |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Engraving tool GG |
| 2 x | Backing disc for LWS |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Complete Engraving Kit with trial glass |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | TORX-screwdrivers T20 |
| 1 x | MICROMOT drill stand MB 200 |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | MICRO Heat gun MH 550 |
| 1 x | Cross-recess Screwdrivers Pozidriv 2 |
| 1 x | 14-piece parallel supports set |
| 1 x | Step clamps made of steel |
| 1 x | Corundum bound cutting disc for LWS |
| 2 x | Footswitch FS |
| 1 x | Precision steel vice PM 40 |
| 1 x | MICROMOT steel collet set |
| 1 x | Corundum fan sander for LWS |
| 1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | Corundum fan sander for LWS |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | MICRO-screwdrivers |
| 1 x | Cross-recess Screwdrivers Pozidriv 1 |
| 1 x | Precision lathe PD 250/E |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Lathe System PD 400 |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | Universal holder UHZ |
| 1 x | Aluminium Die-Cast |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | Universal polishing paste |
| 1 x | Replacement glue sticks for HKP 220 |
| 1 x | MICROMOT tool holder |
| 1 x | |
| 1 x | TORX-screwdrivers T10 |
| 1 x | TORX-screwdrivers T9 |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 2 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | Flexishaft MICROMOT 110/P |
| 1 x | Three piece thread cutting set |
| 1 x | Tungsten carbide cutters set |
| 1 x | Sanding fleece for LWS |
| 1 x | TORX-screwdrivers T15 |
| 1 x | Flexishaft MICROMOT 110/BF |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 1 x | MICROFLAME burner MFB/E |
| 1 x | Three-jaw steel drill chuck |
| 2 x | ESD Brushe |
| 1 x | Professional set for finish grinding and polishing |
| 1 x | Super-fine sanding discs grain 000 |
| 1 x | Half round cutter 13mm |
| 1 x | MICROMOT 50/EF |
| 1 x | Five piece HSS chisel set |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Precision drill grinder FBS 12/EF |
| 1 x | Bench drill press TBH |
| 1 x | Long neck angle milling/drilling unit LWB 220/E |
| 1 x | MICRO Miller FF 230 |
| 1 x | Super-fine sanding discs grain 2000 |
| 2 x | Magnetic base |
| 1 x | Core box bit 3.2mm |
| 2 x | Hot wire cutter THERMOCUT 230/E |
| 1 x | Angle cutter 45 ° |
| 1 x | Precision Drill/Grinder FBS 240/E |
| 1 x | MICRO Miller MF 70 |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | Long neck straight drill/grinder LB/E |
| 1 x | Fine dust paper filter for CW-matic |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | Slot cutter 6.5mm |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | MICROMOT 50/E |
| 1 x | V-slot cutter 6.5mm |
| 2 x | ESD Brushe |
| 1 x | Lambswool polishing disc |
| 1 x | Professional Drill/Grinder IBS/E |
| 1 x | Fluted filter for CW-matic |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | 10-piece wood router cutter set |
| 1 x | MICROMOT 50 |
| 1 x | Slot cutter 5.0mm |
| 1 x | Rounding over cutter 6.4mm |
| 1 x | Professional polishing sponge |
| 1 x | Polishing felt, medium hard |
| 1 x | Microfibre cloth |
| 1 x | Rebating cutter 6.4mm |
| 1 x | MICRO Miller FF 500 |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | MICROMOT 230/E |
| 1 x | Bench drill machine TBM 220 |
| 1 x | Slot cutter 3.2mm |
| 1 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | Blade for Steel and brass |
| 1 x | Blade guides separately |
| 1 x | Cross-recess Screwdrivers 2 |
| 1 x | Precision caliper square |
| 1 x | 6-piece set of ESD/EGB tweezers |
| 1 x | HSS cutting blade for OZI |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | PRECISION WIRE STRIPPER ESD-PLUS |
| 1 x | Chuck for TBM 220 |
| 1 x | Universal and oil siphoning pump AP 12 |
| 1 x | Replacement cutting wire for the THERMOCUT 12/E |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | Brass contact cleaner brush |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | 6-piece screwdriver set ESD |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Special Fused Alumina (Hardness N). |
| 1 x | Cutting disc, with reinforcement |
| 1 x | Crosscut 'Super-Cut' blade |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Blade for Wood and Plastics |
| 1 x | TORX-screwdrivers T7 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | 6-piece TORX-screwdriver-set ESD |
| 1 x | magnetic base 80kg |
| 1 x | Screwdriver bit set. 49-piece. |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Cross-recess Screwdrivers 0 |
| 1 x | BIT-SET |
| 1 x | Cross-recess Screwdrivers 000 |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | 6-piece screwdriver and cross-recess set ESD |
| 1 x | Diamond cutting blade for OZI |
| 1 x | Cross-recess Screwdrivers 00 |
| 1 x | Wrench Keys 2.5 |
| 1 x | Sanding pads for OZI 220/E grit 80 |
| 1 x | Wrench Keys 2.0 |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | Wrench Keys 1.5 |
| 1 x | Tungsten tipped saw blade |
| 1 x | TORX-screwdrivers T8 |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | Wrench Keys 0.7 |
| 1 x | Wrench Keys 1.3 |
| 2 x | Dial gauge |
| 1 x | Spare cutting wire |
| 1 x | Super safety and specialty bit set, 75-piece |
| 1 x | Cross-recess Screwdrivers 2 |
| 1 x | 6-piece wrench key set ESD |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | Lever Dial Indicator |
| 1 x | Diamond blade |
| 1 x | Silicon-Carbide. |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Jig saw blades made of HSS |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Polishing Set |
| 1 x | Wrench Keys 0.9 |
| 1 x | TORX-screwdrivers T5 |
| 1 x | TORX-screwdrivers T4 |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | Solid carbide saw blade |
| 1 x | Band knife of hardened spring band steel (without teeth) |
 |
| €12,243.49 |
