| 2 x | Lambswool polishing disc |
| 2 x | Bench drill machine TBM 220 |
| 1 x | TU 2004V |
| 4 x | |
| 1 x | MICROMOT 230/E |
| 1 x | Super jig saw STS/E |
| 3 x | Bench drill press TBH |
| 1 x | Flexible silicon discs |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Professional Drill/Grinder IBS/E |
| 2 x | Half round cutter 13mm |
| 2 x | Fibre-Cut Discs |
| 2 x | Cylinder sander WAS/E |
| 1 x | MICROMOT 50/E |
| 1 x | Tungsten carbide cutters set |
| 1 x | Wolfram vanadium steel milling bits |
| 2 x | Fibre-Cut Discs |
| 3 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Magnetic base |
| 1 x | Cutting disc, with reinforcement |
| 1 x | Sanding pads for OZI 220/E grit 80 |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | Solid carbide stylus for engraving |
| 3 x | MICRO Miller FF 500 |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Insert CCGT120404-AK |
| 1 x | Broca de alta duração de 2.0mm |
| 2 x | Diamond Cutting Discs |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Insert CCGT060202-AK |
| 1 x | Super-fine sanding discs grain 000 |
| 2 x | HSS boring tool set, 6 pieces |
| 2 x | Engraving tool GG |
| 1 x | DCMT070204 |
| 1 x | Broca de alta duração de 0.4mm |
| 2 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | Round nose pliers 160mm |
| 1 x | EUROline end cutter |
| 1 x | Step clamps made of steel |
| 1 x | Milling cutter set (6 - 10mm) |
| 1 x | Professional set for finish grinding and polishing |
| 2 x | Router base OFV |
| 2 x | Flame shaped milling cutters |
| 2 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | Blade for Steel and brass |
| 1 x | Milling cutter set (2 - 5mm) |
| 1 x | Five piece HSS chisel set |
| 1 x | HSS immersion saw blades for OZI |
| 2 x | Inpection mirror 1-978 |
| 1 x | Ball-shaped diamond coated 2.2mm |
| 2 x | Super-fine sanding discs grain 2000 |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 2 x | Fibre-Cut Discs |
| 1 x | Insulation Resistance Tester MG500 |
| 2 x | Vacum SAA 901 |
| 2 x | Rebating cutter 6.4mm |
| 2 x | MICROMOT 50/EF |
| 2 x | Rounding over cutter 6.4mm |
| 2 x | Wood Lathe DB900 |
| 1 x | EUROline mini side cutter |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 2 x | Disc cutters |
| 1 x | Footswitch FS |
| 1 x | Dial gauge |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 2 x | Inspector mirror |
| 1 x | Broca de alta duração de 1.2mm |
| 1 x | MICRO shaper MP 400 |
| 1 x | Super safety and specialty bit set, 75-piece |
| 1 x | BeeHive204 |
| 3 x | Hot wire cutter THERMOCUT 650 |
| 1 x | sandpaper for PS 13 Grit 400 |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | Table Saw TKS 2500 SC |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | Bench Circular Saw KS 230 |
| 1 x | Blade guides separately |
| 1 x | Felt polishers |
| 2 x | Precision Drill/Grinder FBS 240/E |
| 1 x | Tungsten Carbide Tipped (TCT) |
| 2 x | Delta sander OZI/E |
| 2 x | Fibre-Cut Discs |
| 2 x | Precision drill grinder FBS 12/EF |
| 1 x | EUROline flat nose pliers |
| 1 x | PRECISION WIRE STRIPPER ESD-PLUS |
| 1 x | Broca de alta duração de 0.5mm |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | Flap Wheels |
| 1 x | Angle cutter 45 ° |
| 2 x | Three jaw chuck for the lathe DB 250 |
| 2 x | Flap Wheels |
| 2 x | Microfibre polishing wheel, 15-ply (100mm) |
| 2 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | Universal polishing paste |
| 1 x | Flexible silicon discs |
| 2 x | Diamond cutting blade for OZI |
| 1 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Long neck straight drill/grinder LB/E |
| 1 x | broca de alta duração de 0,2mm |
| 1 x | Tungsten carbide cutter 1.0mm |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | Diamond Cutting Discs |
| 1 x | EUROline mini side cutter |
| 3 x | Chuck for TBM 220 |
| 1 x | Flat nose pliers 160mm |
| 1 x | Fixed Steady |
| 1 x | BIT-SET |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Cylinder shaped milling cutters |
| 1 x | Broca de alta duração de 1.0mm |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Micro Compound Table KT 70 |
| 1 x | MICROMOT Mains Adapter NG 5/E |
| 2 x | Disc Sander TG 250/E |
| 1 x | Warding files set, 6pcs |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Telephon pliers straight 160mm |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Cone shaped milling cutter |
| 1 x | Sanding fleece for LWS |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | Ball shaped milling cutters |
| 2 x | Three piece thread cutting set |
| 1 x | PLCC Puller |
| 1 x | Hot wire cutter THERMOCUT 230/E |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | EUROline mini side cutter |
| 1 x | Diamond Coated |
| 1 x | Cutter head for copy and surface milling MT3 |
| 1 x | MICRO woodturning lathe DB 250 |
| 2 x | Dividing attachment TA 230 for PF 250 |
| 1 x | Spare cutting wire |
| 1 x | Slot cutter 6.5mm |
| 1 x | EUROline set of pliers |
| 2 x | Centre Turning Attachment |
| 2 x | Fibre-Cut Discs |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | sandpaper for PS 13 Grot 180 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Angle polisher WP/E |
| 1 x | Tungsten carbide cutter 2.0mm |
| 1 x | Diamond Cutting Discs |
| 1 x | FLUX-OFF 400ml |
| 1 x | Disc Sander TG 125/E |
| 1 x | EUROline side cutter rounded head |
| 1 x | Super-Cut |
| 2 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | 14-piece parallel supports set |
| 1 x | Replacement glue sticks for HKP 220 |
| 1 x | Telephon pliers bent 160mm |
| 1 x | Cylindrical cutters |
| 1 x | Set of precision cutters |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Aluminium Die-Cast |
| 1 x | surface planing and thicknessing ADH 250 |
| 1 x | Felt polishers |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Telephon pliers bent 200mm |
| 1 x | Backing disc for LWS |
| 1 x | TU 2404 |
| 1 x | PLCC Extractor |
| 1 x | Broca de alta duração de 1.3mm |
| 2 x | Edge cutter with pin 6.4mm |
| 1 x | Telephon pliers straight 200mm |
| 1 x | Professional polishing sponge |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 1 x | Broca de alta duração de 1.4mm |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | sanding belts for BBS/s Grit 80 |
| 1 x | Fine dust paper filter for CW-matic |
| 1 x | FLUX DISPENSING PEN, LEAD FREE |
| 1 x | Broca de alta duração de 2.4mm |
| 1 x | Spiral blade. 125mm long with plain ends (without pins). |
| 2 x | Universal and oil siphoning pump AP 12 |
| 1 x | Wire strippers 160mm |
| 1 x | BeeHive208S |
| 1 x | Diamond Twist Drills |
| 1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | Sanding Drums |
| 1 x | Flexible silicon discs |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | EUROline mini side cutter |
| 1 x | Table Sawr TKS 315 E |
| 2 x | Precision lathe PD 250/E |
| 1 x | Belt sander BBS/S |
| 2 x | Fibre-Cut Discs |
| 1 x | EUROline round nose pliers |
| 2 x | Long neck angle milling/drilling unit LWB 220/E |
| 1 x | EUROline top cutter |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | sclcr2525M12 |
| 1 x | broca de alta duração de 0,6mm |
| 1 x | Diamond Cutting Discs |
| 1 x | sanding belts for BBS/s Grit 240 |
| 1 x | magnetic base 80kg |
| 1 x | Combination pliers 185mm |
| 2 x | V-slot cutter 6.5mm |
| 1 x | Jig saw STS 12/E |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Metal Cutting Blades |
| 1 x | MICRO Band Saw MBS 240/E |
| 1 x | Broca de alta duração de 0.7mm |
| 1 x | Core box bit 3.2mm |
| 1 x | 10-piece wood router cutter set |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | TUNER 200ml |
| 1 x | TU 1503V |
| 1 x | 2-speed scroll saw DSH |
| 1 x | Grinding and Polishing Machine SP/E |
| 2 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 1 x | Broca de ponto 3.15 x 1.25 |
| 1 x | Cutter head for copy and surface milling MT2 |
| 1 x | Thicknesser DH 40 |
| 1 x | Pinça SOIC de 8 pinos |
| 1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | Broca de alta duração de 1.5mm |
| 1 x | Blade holders for DS 460 |
| 1 x | Diamond blade |
| 1 x | EUROline side cutter pointed head |
| 1 x | Three-jaw steel drill chuck |
| 1 x | Diamond Grinding Bits 5mm |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 1 x | HSS cutting blade for OZI |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Broca de alta duração de 2.5mm |
| 1 x | Sanding fleece for LWS |
| 1 x | Microfibre cloth |
 |
| €37,488.33 |
.jpg "BIT-SET")
