1 x | Router base OFV |
1 x | Compact workshop vacuum cleaner CW-matic |
1 x | MICROFLAME burner MFB/E |
1 x | Complete Engraving Kit with trial glass |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | Universal holder UHZ |
1 x | Engraving tool GG |
1 x | MICRO Heat gun MH 550 |
1 x | MICROMOT glue gun HKP 220 |
1 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Machine Vice MS 4 |
1 x | Precision Vice FMZ |
1 x | Multipurpose Vices Primus 75 |
1 x | Gear Chuck |
1 x | Universal and oil siphoning pump AP 12 |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Centre Turning Attachment |
2 x | MICROMOT Mains Adapter NG 2/S |
1 x | Screwdriver bit set. 49-piece. |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Multiform grindstone |
2 x | Brass contact cleaner brush |
1 x | Chuck for TBM 220 |
2 x | Micro Compound Table KT 70 |
1 x | Four Jaw Chuck |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | Coarse-toothed (18 TPI per 25mm) |
2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Coarse-toothed (25 TPI per 25mm) |
2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
2 x | MICROMOT Mains Adapter NG 5/E |
1 x | Blade holders for DS 460 |
1 x | Collet Set for accurate use on round components |
1 x | Replacement carving blades for MSG |
1 x | Fluted filter for CW-matic |
2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Fixed Steady |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | 6-piece set of ESD/EGB tweezers |
1 x | Fine dust paper filter for CW-matic |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Multipurpose Vices Primus100 |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Tool holder for rotary tools |
1 x | Precision Vice FMS 75 |
1 x | Precision steel vice PM 40 |
1 x | Replacement belts for BSL 220/E |
1 x | Lambswool polishing disc |
1 x | Microfibre cloth |
1 x | Polishing felt, medium hard |
1 x | Replacement belts for BSL 220/E |
1 x | Professional polishing sponge |
1 x | Replacement belts for BSL 220/E |
1 x | Backing disc for LWS |
1 x | sanding belts for BBS/s Grit 80 |
1 x | Professional set for finish grinding and polishing |
1 x | Super-fine sanding discs grain 400 |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Super-fine sanding discs grain 2000 |
1 x | Super-fine sanding discs grain 000 |
1 x | sanding belts for BBS/s Grit 150 |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | Replacement belts for BSL 220/E |
1 x | HSS boring tool set, 6 pieces |
1 x | 2-speed scroll saw DSH |
1 x | Polishing Set |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Super jig saw STS/E |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Lathe System PD 400 |
1 x | Table Saw FET |
1 x | Special Fused Alumina (Hardness N). |
1 x | Precision lathe PD 250/E |
1 x | Surface planer AH 80 |
1 x | Thicknesser DH 40 |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | Cut off/mitre saw KGS 80 |
1 x | Silicon-Carbide. |
1 x | |
1 x | Diamond Coated |
1 x | Motor-driven carving device MSG |
1 x | Scroll saw DS 230/E |
1 x | MICRO cutter MIC |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Super-Cut |
1 x | Universal polishing paste |
1 x | MICRO Band Saw MBS 240/E |
1 x | Bench Circular Saw KS 230 |
1 x | Cutting disc, with reinforcement |
1 x | Jig saw STS 12/E |
1 x | MICRO shaper MP 400 |
1 x | Three piece thread cutting set |
1 x | MICRO woodturning lathe DB 250 |
1 x | Spare cutting wire |
1 x | Three-jaw steel drill chuck |
1 x | Mill/Drill Unit BFB 2000. |
1 x | MICROMOT tool holder |
1 x | Replacement glue sticks for HKP 220 |
1 x | Flexishaft MICROMOT 110/BF |
1 x | 14-piece parallel supports set |
1 x | Independent four jaw chuck for the DB 250 |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | MICROMOT Mains Adapter NG 2/E |
1 x | MICROMOT extension cord. 300cm. |
1 x | MICROMOT drill stand MB 200 |
2 x | Footswitch FS |
1 x | Three jaw chuck for the lathe DB 250 |
1 x | MICROMOT steel collet set |
1 x | Protective device for hand-operated MICROMOT |
1 x | Five piece HSS chisel set |
1 x | Flexishaft MICROMOT 110/P |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Aluminium Die-Cast |
1 x | BGA-Bottom-11 |
1 x | BGA-Bottom-111 |
1 x | BGA-Bottom-108 |
1 x | BGA-Bottom-115 |
1 x | BGA-Bottom-105 |
1 x | BGA-Bottom-1 |
1 x | BGA-Bottom-101 |
2 x | BeeHive204 |
1 x | BGA-0245/0241 |
1 x | Glass fibre contact cleaner brush |
1 x | BGA-0245/0242 |
1 x | BGA-0246/0244 |
1 x | BGA-Bottom-118 |
1 x | BGA-0246/0243 |
1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
1 x | BGA-Bottom-102 |
1 x | BGA-0245/0243 |
1 x | BGA-Bottom-103 |
1 x | BGA-Bottom-10 |
1 x | BGA-Bottom-125 |
1 x | BeeHive208S |
1 x | Broca de alta duração de 2.0mm |
1 x | Broca de alta duração de 2.3mm |
1 x | broca de alta duração de 0,6mm |
![](images/pixel_black.gif) |
€26,632.97 |