| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Centre Turning Attachment |
| 1 x | Diamond blade for MBS 240/E |
| 2 x | Insulation Resistance Tester MG125 |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Grinding mop cylinder grit 80 |
| 1 x | Blade for Steel and brass |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Blade for Wood and Plastics |
| 1 x | Gear Chuck |
| 1 x | Fixed Steady |
| 1 x | Blade guides separately |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Tool holder for rotary tools |
| 1 x | centrically clamping 100mm |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | MICROMOT tool holder |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | HSS cutting blade for OZI |
| 1 x | Rounding over cutter 6.4mm |
| 1 x | 3-jaw chuck centrically clamping 100mm |
| 1 x | 3-jaw chuck centrically clamping 125mm |
| 1 x | MICROMOT drill stand MB 200 |
| 2 x | Tungstein carbide rasp - and cutting disc |
| 2 x | Tungsten Carbide Tipped (TCT) |
| 1 x | sanding belts for BBS/s Grit 240 |
| 1 x | Special Fused Alumina (Hardness N). |
| 1 x | Fine dust paper filter for CW-matic |
| 2 x | Polishing felt, medium hard |
| 1 x | Fluted filter for CW-matic |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | Spare cutting wire |
| 1 x | Table Sawr TKS 315 E |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | Slot cutter 6.5mm |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Sanding fleece for LWS |
| 1 x | surface planing and thicknessing ADH 250 |
| 2 x | Backing disc for LWS |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | 4-jaw chuck individually clamping 80mm |
| 1 x | Slot cutter 5.0mm |
| 1 x | Footswitch FS |
| 1 x | Core box bit 3.2mm |
| 1 x | Flexishaft MICROMOT 110/BF |
| 1 x | Spiral blade. 125mm long with plain ends (without pins). |
| 1 x | Precision steel vice PM 40 |
| 1 x | Precision quick-action drill chuck 0-13mm B16 |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Silicon-Carbide. |
| 1 x | Micro Compound Table KT 70 |
| 1 x | Step clamps made of steel |
| 2 x | Insulation Resistance Tester MG500 |
| 1 x | Slot cutter 3.2mm |
| 1 x | Half round cutter 13mm |
| 1 x | 4-jaw chuck individually clamping 125mm |
| 2 x | Vacum SAA 901 |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Precision quick-action drill chuck 0-8mm B16 |
| 1 x | 14-piece parallel supports set |
| 1 x | Polishing Set |
| 1 x | Corundum fan sander for LWS |
| 1 x | Tungsten carbide cutters set |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | CM2 - B16 - M10 |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | Dial gauge |
| 1 x | Morse taper MT3 - B16 |
| 1 x | Table Saw TKS 2500 SC |
| 1 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | 3-jaw chuck centrically clamping 80mm |
| 1 x | Wood Lathe DB450 |
| 1 x | Angle cutter 45 ° |
| 1 x | Sanding fleece for LWS |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | Blade holders for DS 460 |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Machine Vice MS 4 |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | surface planing and thicknessing ADH 200 |
| 1 x | MICROMOT steel collet set |
| 1 x | Aluminium Die-Cast |
| 1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | Magnetic base |
| 1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | 4-jaw chuck individually clamping 100mm |
| 1 x | Replacement glue sticks for HKP 220 |
| 1 x | Precision magnetic gauge stand |
| 1 x | Replacement cutting wire for the THERMOCUT 12/E |
| 1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | Morse taper MT2 - B16 |
| 1 x | Rebating cutter 6.4mm |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | Corundum fan sander for LWS |
| 1 x | sanding belts for BBS/s Grit 150 |
| 1 x | Cutting disc, with reinforcement |
| 1 x | centrically clamping 125mm |
| 1 x | sanding belts for BBS/s Grit 80 |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | 3-jaw chuck centrically clamping 160mm |
| 3 x | Complete Engraving Kit with trial glass |
| 1 x | DIL32/SOIC32 ZIF 445mil |
| 2 x | FLUX DISPENSING PEN, LEAD FREE |
| 1 x | MICROMOT 50/E |
| 1 x | Long neck straight drill/grinder LB/E |
| 1 x | DIL16/SOIC16-1 ZIF 170mil |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | Professional Drill/Grinder IBS/E |
| 2 x | Belt sander BS/E |
| 1 x | Diamond Coated |
| 3 x | 6-piece screwdriver and cross-recess set |
| 3 x | 6-piece screwdriver and cross-recess set |
| 1 x | Precision drill grinder FBS 12/EF |
| 1 x | MICRO Miller FF 230 |
| 2 x | DIL40/MQFP52 ZIF ADuC812 |
| 1 x | DIL20W/SOIC20 ZIF 300mil |
| 1 x | Steel wheels |
| 2 x | Pensander PS 13 |
| 1 x | DIL28/SOIC28 ZIF 330 mil |
| 1 x | Professional polishing sponge |
| 2 x | Grinding and Polishing Machine SP/E |
| 1 x | Stainless steel cups |
| 1 x | Lambswool polishing disc |
| 1 x | Steel cups |
| 2 x | Router base OFV |
| 1 x | Brass brushes |
| 1 x | DIL16W/SOIC16 ZIF 300mil |
| 2 x | MICRO-screwdrivers |
| 2 x | DIL32/PLCC32 ZIF-CS |
| 1 x | MICROMOT 230/E |
| 1 x | Stainless steel wheels |
| 3 x | 6-piece screwdriver and cross-recess set |
| 2 x | Delta sander OZI/E |
| 1 x | DIL28W/SOIC28 ZIF 300mil |
| 2 x | Cylinder sander WAS/E |
| 1 x | Stainless steel brushes |
| 1 x | DIL20/SOIC20 ZIF 200mil |
| 1 x | Jig saw blades made of HSS |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | DIL40/SOIC28 ZIF AWM-1 |
| 2 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Wheels brushes |
| 1 x | MICROMOT 50/EF |
| 1 x | Bench drill press TBH |
| 1 x | Belt sander BBS/S |
| 1 x | Super-Cut |
| 1 x | Professional set for finish grinding and polishing |
| 1 x | Microfibre cloth |
| 3 x | MICROFLAM gas soldering set MGS |
| 1 x | Precision Drill/Grinder FBS 240/E |
| 1 x | DIL16/SOIC16 ZIF 200 mil |
| 1 x | Super-fine sanding discs grain 000 |
| 1 x | Polishing machine PM 100 |
| 1 x | DIL44/SOIC44 ZIF-CS |
| 1 x | DIL24W/SOIC24 ZIF 300mil |
| 2 x | MICRO Heat gun MH 550 |
| 1 x | Super-fine sanding discs grain 2000 |
| 1 x | Steel brushes |
| 1 x | DIL16W/SOIC16 ZIF 150mil |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Tungsten carbide cutter 3.0mm |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | High quality corundum grinding bits |
| 1 x | Broca de alta duração de 1.5mm |
| 1 x | High quality corundum grinding bits |
| 1 x | High quality corundum grinding bits |
| 1 x | HSS twist drill set to DIN 338 |
| 1 x | HSS twist drill set with centring pin |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | MICROFLAME burner MFB/E |
| 1 x | Broca de alta duração de 2.8mm |
| 1 x | Broca de alta duração de 2.0mm |
| 1 x | Cylinder shaped milling cutters |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Broca de alta duração de 2.4mm |
| 1 x | Ball shaped milling cutters |
| 1 x | Broca de alta duração de 2.6mm |
| 1 x | Broca de alta duração de 1.4mm |
| 1 x | HSS drill bits 1.0mm |
| 1 x | Tungsten carbide drills Ø2mm |
| 1 x | High quality corundum grinding bits |
| 2 x | HSS boring tool set, 6 pieces |
| 1 x | Tungsten carbide drills Ø1mm |
| 1 x | High quality corundum grinding bits |
| 1 x | Solid carbide stylus for engraving |
| 1 x | HSS drill bits 1.2mm |
| 1 x | Broca de alta duração de 2.5mm |
| 1 x | High quality corundum grinding bits |
| 1 x | Cone shaped milling cutter |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | Conjunto de três brocas de ponto |
| 3 x | 6-piece TORX-screwdriver-set |
| 1 x | Broca de alta duração de 1.2mm |
| 1 x | HSS drill bits 1.6mm |
| 1 x | Broca de alta duração de 0.3mm |
| 1 x | Broca de alta duração de 0.4mm |
| 1 x | Flame shaped milling cutters |
| 1 x | Precision lathe PD 250/E |
| 1 x | Solid carbide stylus for engraving |
| 1 x | Broca de alta duração de 1.0mm |
| 1 x | HSS drill bits 0.5mm |
| 1 x | Broca de alta duração de 0.9mm |
| 1 x | Broca de alta duração de 0.7mm |
| 1 x | Tungsten carbide cutter 2.0mm |
| 1 x | Tungsten carbide cutter 1.0mm |
| 1 x | Lathe System PD 400 |
| 1 x | Engraving tool GG |
| 1 x | Set of special steel cutters |
| 2 x | Three piece thread cutting set |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 1 x | Broca de alta duração de 2.7mm |
| 1 x | Cylindrical cutters |
| 1 x | Broca de alta duração de 2.9mm |
| 1 x | High quality corundum grinding bits |
| 1 x | DIL40/TSOP40 ZIF 18.4mm |
| 2 x | DIL48/PQFP100 ZIF PLD-1 |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | DIL28/TSOP28 ZIF 11.8 mm |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-6 |
| 1 x | DIL44/TSOP44-II ZIF 400mil |
| 1 x | DIL28/TSOP28 ZIF 11,8mm Flash |
| 1 x | DIL40/TSOP40 ZIF-CS 12.4mm |
| 1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-3 |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | DIL48/PQFP100 ZIF ST10-1 |
| 2 x | DIL48/PQFP80 ZIF M58BW-1 |
| 1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
 |
| €22,356.86 |
