1 x | Sanding Drums |
2 x | Sanding bands 14x13mm |
3 x | Half round cutter 13mm |
2 x | Core box bit 3.2mm |
2 x | Sanding Drums |
2 x | Edge cutter with pin 6.4mm |
2 x | Slot cutter 6.5mm |
1 x | Tungsten carbide cutter 3.0mm |
2 x | V-slot cutter 6.5mm |
3 x | Rebating cutter 6.4mm |
4 x | Replacement cutting disc for MICRO cutter MIC |
3 x | sandpaper for PS 13 Grit 400 |
3 x | sandpaper for PS 13 Grot 180 |
3 x | Flap Wheels |
2 x | Slot cutter 3.2mm |
3 x | Sanding Discs |
1 x | 10-piece wood router cutter set |
1 x | Sanding Discs |
3 x | Angle cutter 45 ° |
1 x | Sanding Drums |
2 x | Nylon Fleece Brushes |
2 x | Combi cutter 6.5/2.5mm |
3 x | Rounding over cutter 6.4mm |
1 x | Sanding Drums |
2 x | Slot cutter 5.0mm |
3 x | Sanding bands 14x13mm |
2 x | Multipurpose Vices Primus100 |
3 x | Silicon-Carbide. |
2 x | Machine Vice MS 4 |
1 x | Fibre-Cut Discs |
1 x | Fibre-Cut Discs |
1 x | Felt polishers |
2 x | Super-fine sanding discs grain 2000 |
1 x | Cotton polishers |
3 x | Diamond Cutting Discs |
2 x | Precision steel vice PM 40 |
2 x | Lambswool polishing disc |
2 x | Precision Vice FMS 75 |
1 x | Fibre-Cut Discs |
2 x | Metal Cutting Blades |
2 x | Backing disc for LWS |
2 x | Flexible polishing pad set |
2 x | Flexible polishing pad set |
1 x | Fibre-Cut Discs |
1 x | Fibre-Cut Discs |
2 x | Super-fine sanding discs grain 000 |
1 x | Felt polishers |
1 x | Cotton polishers |
3 x | Diamond Cutting Discs |
1 x | Fibre-Cut Discs |
3 x | Diamond Cutting Discs |
1 x | Cotton polishers |
4 x | Polishing Set |
1 x | Felt polishers |
1 x | Polishing paste |
1 x | Broca de alta duração de 3.0mm |
2 x | Professional polishing sponge |
1 x | Felt polishers |
1 x | Ball-shaped diamond coated 3.2mm |
2 x | Diamond Grinding Bits 1,8mm |
2 x | Diamond Twist Drills |
2 x | Diamond Grinding Bits 1,8mm |
2 x | HSS boring tool set, 6 pieces |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Ball-shaped diamond coated 1.2mm |
2 x | Diamond-coated cutting disc for MIC |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | Precision lathe PD 250/E |
2 x | Ball-shaped diamond coated 2.2mm |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Diamond Grinding Bits 1mm |
4 x | Three piece thread cutting set |
2 x | Diamond Grinding Bits 5mm |
2 x | Tungsten carbide drills Ø1,5mm |
2 x | HSS drill bits 0.8mm |
2 x | HSS drill bits 1.0mm |
1 x | Tungsten carbide drills Ø1mm |
1 x | Set of special steel cutters |
2 x | Tungsten carbide drills Ø2mm |
1 x | HSS twist drill set to DIN 338 |
2 x | HSS drill bits 0.5mm |
2 x | Conjunto de três brocas de ponto |
2 x | Solid carbide stylus for engraving |
1 x | Tungsten carbide cutter 2.0mm |
1 x | Ball shaped milling cutters |
1 x | Special Fused Alumina (Hardness N). |
2 x | Chuck for TBM 220 |
1 x | Milling cutter set (2 - 5mm) |
2 x | HSS drill bits 1.6mm |
1 x | Set of precision cutters |
2 x | HSS drill bits 1.2mm |
1 x | Cylinder shaped milling cutters |
1 x | Tungsten carbide cutters set |
1 x | Cone shaped milling cutter |
1 x | Wolfram vanadium steel milling bits |
1 x | Milling cutter set (6 - 10mm) |
1 x | Wolfram vanadium steel milling bits |
2 x | Solid carbide stylus for engraving |
2 x | Cylindrical cutters |
2 x | Disc cutters |
1 x | Flame shaped milling cutters |
1 x | HSS twist drill set with centring pin |
1 x | Tungsten carbide cutter 1.0mm |
2 x | Multipurpose Vices Primus 75 |
1 x | High quality corundum grinding bits |
3 x | Broca de alta duração de 2.3mm |
3 x | Grinding mop cylinder grit 80 |
2 x | Precision Vice FMZ |
1 x | High quality corundum grinding bits |
2 x | High quality corundum grinding bits |
2 x | Broca de alta duração de 2.5mm |
1 x | High quality corundum grinding bits |
2 x | Broca de alta duração de 1.2mm |
2 x | Broca de alta duração de 0.8mm |
1 x | High quality corundum grinding bits |
2 x | High quality corundum grinding bits |
3 x | Grinding mop cylinder grit 240 |
3 x | Broca de alta duração de 1.0mm |
1 x | High quality corundum grinding bits |
2 x | Broca de alta duração de 2.0mm |
2 x | High quality corundum grinding bits |
2 x | Broca de alta duração de 0.5mm |
3 x | Broca de alta duração de 0.4mm |
1 x | Microfibre cloth |
1 x | sandpaper for PS 13 Grit 240 |
3 x | Broca de alta duração de 2.7mm |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Lathe System PD 400 |
1 x | broca de alta duração de 0,6mm |
1 x | Broca de alta duração de 1.5mm |
1 x | Broca de alta duração de 0.7mm |
1 x | Broca de alta duração de 0.9mm |
1 x | Broca de alta duração de 1.1mm |
1 x | Broca de alta duração de 1.3mm |
1 x | broca de alta duração de 0,2mm |
2 x | Micro Compound Table KT 70 |
1 x | Broca de alta duração de 2.1mm |
1 x | Broca de alta duração de 2.2mm |
3 x | Broca de alta duração de 2.9mm |
1 x | Broca de alta duração de 2.4mm |
1 x | HSS immersion saw blades for OZI |
2 x | Bandsaw blade of bimetal for MBS 240/E |
3 x | Flexishaft MICROMOT 110/BF |
1 x | DIL40/VQFP64 ZIF AWM-1 |
1 x | MICROMOT tool holder |
1 x | Jig saw blades made of HSS |
1 x | Crosscut 'Super-Cut' blade |
1 x | DIL24/QSOP24 ZIF 150mil |
1 x | Aluminium Die-Cast |
3 x | Footswitch FS |
2 x | Flexishaft MICROMOT 110/P |
1 x | Coarse-toothed (18 TPI per 25mm) |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | Blade for Wood and Plastics |
1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
2 x | Protective device for hand-operated MICROMOT |
1 x | Diamond blade |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | MICROMOT drill stand MB 200 |
1 x | Solid carbide saw blade |
1 x | Diamond blade for MBS 240/E |
1 x | Blade for Steel and brass |
1 x | HSS immersion saw blades for OZI |
1 x | Coarse-toothed (10 TPI per 25mm) |
1 x | DIL48/LQFP64 ZIF M38039/M39049 |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | DIL48/LQFP64 ZIF M16C/Tiny |
1 x | Complete Engraving Kit with trial glass |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Supercut jig saw blades of special steel |
1 x | Engraving tool GG |
1 x | PLCC Puller |
2 x | Grinding mop cylinder grit 120 |
1 x | Mini side cutters EUROline-Conductive |
2 x | EUROline-Conductive set of pliers |
1 x | BeeProg2 |
1 x | Beeprog2C |
1 x | End side cutters EUROline-Conductive |
2 x | BeeHive208S |
1 x | DIL48/PQFP100 ZIF PLD-1 |
2 x | Grinding mop cylinder grit 120 |
2 x | Flexible silicon discs |
1 x | ESD-handling ser 9-361 |
1 x | DIL48/PQFP144 ZIF ST10-1 |
1 x | DIL48/PQFP100 ZIF ST10-1 |
1 x | Snipe nose pliers 45º EUROline-Conductive |
2 x | Grinding and Polishing Machine SP/E |
1 x | 6-piece screwdriver and cross-recess set ESD |
3 x | Replacement glue sticks for HKP 220 |
1 x | DIL48/PQFP80 ZIF M58BW-1 |
1 x | 6-piece TORX-screwdriver-set ESD |
1 x | Flat nose pliers 45º EUROline-Conductive |
2 x | Fluted filter for CW-matic |
1 x | 6-piece socket wrenches ESD |
2 x | Side cutters EUROline-Conductive |
1 x | Mini side cutters EUROline-Conductive |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | DIL28/TSSOP28 ZIF 170mil |
2 x | Four Jaw Chuck |
1 x | 6-piece wrench key set ESD |
2 x | BeeHive204 |
1 x | Gear Chuck |
1 x | Mini side cutters EUROline-Conductive |
1 x | 6-piece screwdriver set ESD |
1 x | End side cutters 45º EUROline-Conductive |
2 x | Flexible silicon discs |
1 x | Round nose pliers 45º EUROline-Conductive |
1 x | ESD-handling set |
1 x | DIL24/TSSOP24 ZIF 170mil |
1 x | DIL48/PQFP100 ZIF ST92Fxxx |
1 x | Glass fibre contact cleaner brush |
1 x | BGA-0245/0243 |
1 x | DIL28/PLCC28 ZIF |
1 x | BGA-0246/0243 |
1 x | DIL20/PLCC20 ZIF-CS |
1 x | Brass brushes |
1 x | DIL40/PLCC44 ZIF AWM-1 |
1 x | DIL44/SOIC44 ZIF-CS |
1 x | DIL44/MLF44-1 ZIF-CS |
1 x | DIL48/SSOP70 ZIF OKI-1 |
1 x | DIL32/QFP64 ZIF H8-1 |
1 x | DIL40/PLCC52 ZIF AWM-1 |
1 x | DIL16/SOIC16-1 ZIF 170mil |
1 x | DIL48/SSOP48 ZIF 300mil |
1 x | DIL48/MQFP80 ZIF C500 |
1 x | BGA-Bottom-1 |
1 x | DIL28/PLCC32 ZIF EPROM |
1 x | BGA-Bottom-103 |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | DIL40/QFP64-2 ZIF-CS NEC-1 |
1 x | BGA-Bottom-105 |
1 x | DIL40/PLCC44 ZIF PIC-1 |
1 x | BGA-Bottom-11 |
1 x | Spare cutting wire |
1 x | DIL48/QFP100 ZIF PLD-4 |
1 x | DIL44/SSOP44 ZIF 240mil |
1 x | DIL48/SSOP90 ZIF Flash-1 |
1 x | DIL48/MQFP80 ZIF C164 |
1 x | DIL40/QFP100 ZIF AVR-1 |
1 x | DIL18W/SOIC18 ZIF 300mil |
1 x | DIL40/QFP64-4 ZIF NEC-1 |
1 x | Steel wheels |
1 x | DIL40/MQFP52 ZIF ADuC812 |
1 x | DIL40/QFP64-1 ZIF-CS NEC-1 |
1 x | DIL48/QFP100 ZIF NEC-2 |
1 x | Steel cups |
1 x | DIL28/PLCC84 ZIF HS538ESC01H |
1 x | DIL16W/SOIC16 ZIF 150mil |
1 x | DIL40/QFP64-3 ZIF NEC-1 |
1 x | MICROMOT extension cord. 300cm. |
1 x | DIL40/PLCC52 ZIF MCS51-2 |
1 x | DIL8/SSOP8 ZIF 120mil |
1 x | DIL40/SOIC20 ZIF AWM-1 |
1 x | DIL40/PLCC52 ZIF DS87C530 |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | DIL20/SOIC20 ZIF 300 mil |
2 x | DIL32/PLCC32 ZIF |
1 x | DIL40/SOIC16 ZIF MB-1 |
1 x | Stainless steel cups |
1 x | DIL20W/PLCC20 ZIF |
1 x | MICROFLAM gas soldering set MGS |
1 x | BGA-Bottom-115 |
1 x | BGA-Bottom-111 |
1 x | DIL48/QFP100 ZIF PLD-3 |
1 x | DIL48/SSOP56 ZIF Flash-2 |
1 x | BGA-Bottom-118 |
1 x | DIL40/QFP144 ZIF LPC-1 |
1 x | DIL48/QFP100 ZIF PLD-2 |
1 x | DIL20W/SOIC20 ZIF 300mil |
1 x | DIL32/MLF32-1 ZIF |
1 x | Cups brushes |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | DIL28/SOIC28 ZIF 330 mil |
1 x | DIL32/PLCC32 ZIF-CS |
1 x | DIL32/SOIC32 ZIF 300 mil |
1 x | BGA-Bottom-102 |
1 x | DIL48/SSOP56 ZIF Flash-3 |
1 x | DIL32/SOIC32 ZIF 445mil |
1 x | BGA-Bottom-10 |
1 x | DIL34/SSOP34 ZIF 200 mil |
1 x | DIL40/PLCC28 ZIF AWM-1 |
1 x | DIL20/SOIC20 ZIF 200mil |
1 x | DIL28W/SOIC28 ZIF 300mil |
1 x | BGA-Bottom-125 |
1 x | DIL40/QFP80 ZIF M37702 |
1 x | DIL48/QFP100 ZIF NEC-1 |
1 x | Steel brushes |
1 x | DIL32/PLCC84 ZIF HS3334ESCF1H |
1 x | DIL16/SOIC16 ZIF 200 mil |
1 x | DIL24W/SOIC24 ZIF 300mil |
1 x | BGA-Bottom-106 |
1 x | DIL3/SOT23-3 ZIF-CS |
1 x | DIL40/PLCC68 ZIF AWM-1 |
1 x | DIL40/SOIC20 ZIF MB95-1 |
2 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | DIL40/PLCC44 ZIF W-EPROM / MCS51 |
1 x | Stainless steel brushes |
1 x | BGA-0246/0244 |
1 x | DIL48/QFP100 ZIF PLD-1 |
1 x | DIL48/QFP100 ZIF MB90F-1 |
1 x | DIL28/PLCC28 ZIF-CS |
1 x | Wheels brushes |
1 x | BGA-Bottom-101 |
1 x | BGA-0245/0241 |
1 x | DIL14W/SOIC14 ZIF 150mil |
1 x | DIL34/SSOP34-1 ZIF-CS |
1 x | DIL40/PLCC52 ZIF AWM-2 |
1 x | DIL40/SOIC28 ZIF AWM-1 |
1 x | Stainless steel wheels |
1 x | DIL28/QFP64 ZIF H8/3644 |
1 x | Fixed Steady |
1 x | DIL32/PLCC32 ZIF-CS NOR-1 |
1 x | BGA-Bottom-108 |
1 x | ACCENT SERVICE TOOLS SET |
1 x | DIL40/MLF64 ZIF-CS AVR-1 |
1 x | DIL28/QFP52 ZIF-CS SX52 |
1 x | DIL40/PLCC68 ZIF DS87C550 |
1 x | DIL48/SSOP56 ZIF Flash-1 |
1 x | DIL40/QFP64 ZIF LPC-1 |
1 x | Diamond Coated |
1 x | sanding belts for BBS/s Grit 80 |
1 x | DIL48/TSOP56 ZIF 18.4mm Flash-1 |
1 x | DIL48/TSOP56 ZIF 18.4mm Flash-3 |
1 x | Earth wire |
1 x | DIL8/QFN8-1 ZIF-CS |
1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
1 x | Replacement belts for BSL 220/E |
1 x | DIL48/TSOP56 ZIF 18.4mm Flash-2 |
1 x | Corundum sanding discs for LWS |
1 x | Floor cover ESD |
1 x | Contact bracelet with spiral cord |
1 x | Bottom PSOP44 NOR-1 |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Corundum sanding discs for LWS |
1 x | Bottom PSOP44 NOR-3 |
1 x | DIL40/TSOP40 ZIF-CS 12.4mm |
1 x | Bench drill press TBH |
1 x | DIL48/SDIP56 ZIF 68HC05Bx |
1 x | DIL44/QFN44-2 ZIF-CS |
1 x | PLCC Extractor |
1 x | Crocodile clip |
1 x | DIL32/SDIP32 ZIF 400mil |
1 x | DIL28/TSOP28 ZIF 11.8 mm |
1 x | Sanding pads for OZI 220/E grit 80 |
1 x | Diamond-coated cutting and roughing disc |
1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
1 x | DIL42/SDIP42 ZIF 600mil |
1 x | DIL32/SDIP64 ZIF H8-1 |
1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
1 x | ESD Brushe |
1 x | DIL48/QFN48 ZIF-CS |
1 x | Corundum fan sander for LWS |
1 x | DIL28/TSOP28 ZIF 11,8mm Flash |
1 x | Corundum fan sander for LWS |
1 x | Hot wire cutter THERMOCUT 12/E |
1 x | Diamond cutting blade for OZI |
1 x | Thicknesser DH 40 |
1 x | Sanding fleece for LWS |
1 x | HSS cutting blade for OZI |
1 x | Router base OFV |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Replacement carving blades for MSG |
1 x | 14-piece parallel supports set |
2 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | Earthing module |
1 x | Diamond Cutting Discs |
1 x | Flexible silicon discs |
1 x | Screwdriver bit set. 49-piece. |
1 x | DIL40/SDIP52 ZIF 55x |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Super-Cut |
1 x | Professional set for finish grinding and polishing |
1 x | Bottom PSOP44 NOR-2 |
1 x | DIL44/TSOP44-II ZIF 400mil |
1 x | Super-fine sanding discs grain 400 |
1 x | Replacement belts for BSL 220/E |
1 x | Cutting disc, with reinforcement |
1 x | Sanding fleece for LWS |
1 x | DIL32/SDIP64-1 ZIF Toshiba-BM1136 |
1 x | Earth wire with dummy Schunko-plug |
1 x | Earth wire |
1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
1 x | ESD Brushe |
1 x | DIL28/QFN28-2 ZIF-CS |
1 x | DIL40/TSOP40 ZIF 18.4mm |
1 x | Brass contact cleaner brush |
1 x | DIL48/TSOP48 ZIF 15.4mm |
1 x | DIL44/PSOP44 ZIF 600 mil |
1 x | Replacement belts for BSL 220/E |
1 x | Corundum grinding disc for LWS |
1 x | DIL32/TSOP32 ZIF 11.8mm |
1 x | DIL48/TSOP48 ZIF 18.4mm |
1 x | Replacement belts for BSL 220/E |
1 x | DIL48/TSOP56 ZIF 18.4mm Flash-5 |
1 x | DIL48/TSOP56 ZIF 18.4mm Flash-6 |
1 x | sanding belts for BBS/s Grit 150 |
1 x | Corundum bound cutting disc for LWS |
1 x | ESD Tweezers 5-195 |
1 x | DIL40/TQFP80-1 ZIF PIC-1A |
1 x | Flap Wheels |
1 x | DIL40/TQFP64 ZIF AVRmega-2 |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | DIL40/TQFP44 ZIF PIC-1 |
1 x | |
1 x | DIL40/TQFP80-1 ZIF AWM-1 |
1 x | ESD Tweezers 5-192 |
1 x | DIL44/TQFP44-3 ZIF |
1 x | Three-jaw steel drill chuck |
![](images/pixel_black.gif) |
€60,268.29 |