| 3 x | High quality corundum grinding bits |
| 1 x | HSS boring tool set, 6 pieces |
| 2 x | Flexible polishing pad set |
| 1 x | IC Test clip 20 pins |
| 1 x | Replacement carving blades for MSG |
| 2 x | Fibre-Cut Discs |
| 2 x | Milling cutter set (2 - 5mm) |
| 2 x | Fibre-Cut Discs |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | Flexible polishing pad set |
| 1 x | Flap Wheels |
| 1 x | Pinça SOIC de 8 pinos |
| 2 x | Tungsten carbide cutters set |
| 1 x | Milling cutter set (6 - 10mm) |
| 2 x | High quality corundum grinding bits |
| 2 x | Fibre-Cut Discs |
| 2 x | Five piece HSS chisel set |
| 1 x | MICROMOT steel collet set |
| 3 x | High quality corundum grinding bits |
| 1 x | HSS twist drill set with centring pin |
| 2 x | Fibre-Cut Discs |
| 1 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 2 x | Conjunto de três brocas de ponto |
| 2 x | High quality corundum grinding bits |
| 2 x | High quality corundum grinding bits |
| 3 x | MICROMOT Mains Adapter NG 2/E |
| 1 x | Thicknesser DH 40 |
| 2 x | Corundum sanding discs for LWS |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Backing disc for LWS |
| 2 x | Corundum fan sander for LWS |
| 2 x | Diamond Cutting Discs |
| 2 x | Corundum grinding disc for LWS |
| 1 x | Polishing Set |
| 2 x | Professional set for finish grinding and polishing |
| 2 x | Diamond Coated |
| 2 x | High quality corundum grinding bits |
| 2 x | Corundum fan sander for LWS |
| 2 x | Replacement belts for BSL 220/E |
| 2 x | Diamond Cutting Discs |
| 2 x | MICROMOT Mains Adapter NG 5/E |
| 2 x | Diamond Cutting Discs |
| 1 x | Super safety and specialty bit set, 75-piece |
| 3 x | High quality corundum grinding bits |
| 2 x | Corundum grinding disc for LWS |
| 3 x | Corundum sanding discs for LWS |
| 1 x | HSS drill bits 0.5mm |
| 1 x | Three piece thread cutting set |
| 3 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | HSS drill bits 1.2mm |
| 1 x | Fixed Steady |
| 1 x | Felt polishers |
| 1 x | 14-piece parallel supports set |
| 1 x | MICROMOT drill stand MB 200 |
| 1 x | Collet Set for accurate use on round components |
| 1 x | Tungsten carbide drills Ø2mm |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 1 x | Mill/Drill Unit BFB 2000. |
| 2 x | Hot wire cutter THERMOCUT 230/E |
| 2 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 2 x | Diamond Twist Drills |
| 3 x | Engraving tool GG |
| 1 x | 10-piece wood router cutter set |
| 3 x | Diamond-coated cutting disc for MIC |
| 2 x | Felt polishers |
| 1 x | Flame shaped milling cutters |
| 1 x | HSS drill bits 1.6mm |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | Sanding bands 14x13mm |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | HSS twist drill set to DIN 338 |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Sanding bands 14x13mm |
| 1 x | Sanding Drums |
| 1 x | Fine dust paper filter for CW-matic |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Sanding Discs |
| 1 x | Wolfram vanadium steel milling bits |
| 2 x | Fibre-Cut Discs |
| 2 x | Felt polishers |
| 1 x | Metal Cutting Blades |
| 2 x | Felt cloth polishing disc (100 x 15mm) |
| 2 x | Fibre-Cut Discs |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Tungsten carbide drills Ø1mm |
| 1 x | Nylon Fleece Brushes |
| 1 x | Sanding Drums |
| 1 x | Super-Cut |
| 1 x | Cut off/mitre saw KGS 80 |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | HSS cutting blade for OZI |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 2 x | Diamond cutting blade for OZI |
| 1 x | Sanding fleece for LWS |
| 1 x | Bench drill press TBH |
| 1 x | Cotton polishers |
| 2 x | |
| 1 x | Centre Turning Attachment |
| 2 x | Cutting disc, with reinforcement |
| 2 x | Grinding mop cylinder grit 240 |
| 2 x | Pensander PS 13 |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | PLCC Extractor |
| 2 x | Step clamps made of steel |
| 2 x | Diamond Cutting Discs |
| 1 x | Independent four jaw chuck for the DB 250 |
| 2 x | Microfibre polishing wheel, 15-ply (100mm) |
| 2 x | Corundum bound cutting disc for LWS |
| 1 x | Universal and oil siphoning pump AP 12 |
| 1 x | Lambswool polishing disc |
| 1 x | Three-jaw steel drill chuck |
| 1 x | Tungsten Carbide Tipped (TCT) |
| 1 x | Super-fine sanding discs grain 000 |
| 2 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | Disc Sander TG 250/E |
| 2 x | Flap Wheels |
| 1 x | Cylindrical cutters |
| 2 x | Flexible silicon discs |
| 1 x | Cups brushes |
| 2 x | Chuck for TBM 220 |
| 2 x | Cotton polishers |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Replacement glue sticks for HKP 220 |
| 1 x | Crosscut 'Super-Cut' blade |
| 1 x | Flexible silicon discs |
| 1 x | Delta sander OZI/E |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Flexible silicon discs |
| 1 x | Super-fine sanding discs grain 2000 |
| 1 x | Disc Sander TG 125/E |
| 1 x | Diamond Grinding Bits 5mm |
| 1 x | Sanding fleece for LWS |
| 1 x | Cylinder shaped milling cutters |
| 1 x | Cotton polishers |
| 1 x | Core box bit 3.2mm |
| 1 x | Diamond Grinding Bits 1mm |
| 1 x | BGA-Bottom-103 |
| 1 x | BGA-Bottom-106 |
| 1 x | BGA-Bottom-105 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-2 |
| 2 x | Broca de alta duração de 0.3mm |
| 1 x | Grinding mop cylinder grit 80 |
| 1 x | Solid carbide stylus for engraving |
| 1 x | BGA-Bottom-88 |
| 1 x | DIL32/TSOP32 ZIF 11.8mm |
| 1 x | Fluted filter for CW-matic |
| 1 x | Precision steel vice PM 40 |
| 1 x | BGA-Bottom-118 |
| 1 x | Broca de alta duração de 0.4mm |
| 1 x | broca de alta duração de 0,6mm |
| 1 x | BGA-Bottom-1 |
| 1 x | BGA-Bottom-127 |
| 1 x | BGA-Bottom-101 |
| 1 x | Machine Vice MS 4 |
| 1 x | Broca de alta duração de 1.3mm |
| 1 x | Hand Magnifier 2-293 |
| 1 x | Broca de alta duração de 2.0mm |
| 1 x | DIL40/TSOP40 ZIF-CS 12.4mm |
| 1 x | sanding belts for BBS/s Grit 150 |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | BGA-Bottom-115 |
| 1 x | BGA-Bottom-10 |
| 1 x | BGA-0245/0243 |
| 1 x | DIL24/QSOP24 ZIF 150mil |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | Broca de alta duração de 1.2mm |
| 1 x | DIL28/TSSOP28 ZIF 170mil |
| 1 x | BGA-0245/0242 |
| 1 x | Half round cutter 13mm |
| 1 x | Broca de alta duração de 1.1mm |
| 1 x | broca de alta duração de 0,2mm |
| 1 x | BGA-0246/0244 |
| 1 x | Grinding and Polishing Machine SP/E |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-6 |
| 1 x | DIL40/VQFP64 ZIF AWM-1 |
| 1 x | Four Jaw Chuck |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-1 |
| 1 x | DIL28/TSOP28 ZIF 11.8 mm |
| 1 x | DIL48/TSOP48 ZIF 18.4mm |
| 1 x | Flexishaft MICROMOT 110/BF |
| 1 x | BGA-Bottom-108 |
| 1 x | Broca de alta duração de 1.4mm |
| 1 x | BGA-Bottom-11 |
| 1 x | Broca de alta duração de 0.8mm |
 |
| €10,381.25 |
