| 1 x | Broca de alta duração de 1.4mm |
| 4 x | 10-piece wood router cutter set |
| 1 x | Broca de alta duração de 0.7mm |
| 3 x | Long neck angle grinder LHW |
| 2 x | Three jaw chuck for the lathe DB 250 |
| 2 x | Flap Wheels |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | Centre Turning Attachment |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Broca de alta duração de 0.9mm |
| 1 x | Replacement carving blades for MSG |
| 3 x | Diamond Cutting Discs |
| 1 x | Conjunto de três brocas de ponto |
| 2 x | Fibre-Cut Discs |
| 2 x | High quality corundum grinding bits |
| 1 x | Professional set for finish grinding and polishing |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | High quality corundum grinding bits |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 2 x | Flexible polishing pad set |
| 2 x | High quality corundum grinding bits |
| 2 x | Backing disc for LWS |
| 2 x | Tungsten carbide cutters set |
| 2 x | Fibre-Cut Discs |
| 2 x | Milling cutter set (2 - 5mm) |
| 1 x | Corundum fan sander for LWS |
| 1 x | Corundum fan sander for LWS |
| 1 x | MICROMOT steel collet set |
| 1 x | HSS twist drill set with centring pin |
| 1 x | Diamond-coated cutting disc for MIC |
| 1 x | Broca de alta duração de 1.2mm |
| 1 x | Hot wire cutter THERMOCUT 12/E |
| 2 x | Fibre-Cut Discs |
| 1 x | Corundum grinding disc for LWS |
| 3 x | Diamond Cutting Discs |
| 1 x | Super safety and specialty bit set, 75-piece |
| 2 x | High quality corundum grinding bits |
| 2 x | Thicknesser DH 40 |
| 2 x | Flexible polishing pad set |
| 1 x | Corundum sanding discs for LWS |
| 2 x | Milling cutter set (6 - 10mm) |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 1 x | Polishing Set |
| 2 x | Fibre-Cut Discs |
| 3 x | Diamond Cutting Discs |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | Diamond Coated |
| 2 x | HSS cutting blade for OZI |
| 1 x | Super-Cut |
| 2 x | Flap Wheels |
| 1 x | Sanding fleece for LWS |
| 1 x | Sanding fleece for LWS |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | Super-fine sanding discs grain 2000 |
| 1 x | Super-fine sanding discs grain 000 |
| 3 x | Diamond Cutting Discs |
| 1 x | Grinding mop cylinder grit 120 |
| 3 x | Socket Wrenches 1.5 |
| 3 x | Socket Wrenches 4.5 |
| 1 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Lambswool polishing disc |
| 2 x | BGA-Bottom-125 |
| 1 x | Tungsten Carbide Tipped (TCT) |
| 1 x | Diamond cutting blade for OZI |
| 2 x | Flexible silicon discs |
| 1 x | Cutting disc, with reinforcement |
| 2 x | Grinding mop cylinder grit 240 |
| 2 x | Flexible silicon discs |
| 3 x | Socket Wrenches 5.5 |
| 2 x | Flexible silicon discs |
| 2 x | Bench drill press TBH |
| 1 x | Stainless steel brushes |
| 4 x | BGA-Bottom-138 |
| 1 x | Steel cups |
| 2 x | BGA-Bottom-148 |
| 1 x | Stainless steel cups |
| 1 x | Fibre-Cut Discs |
| 1 x | Brass brushes |
| 1 x | Metal Cutting Blades |
| 1 x | Wheels brushes |
| 2 x | Precision Vice FMS 75 |
| 1 x | Steel brushes |
| 1 x | Cups brushes |
| 1 x | Steel wheels |
| 1 x | Fibre-Cut Discs |
| 1 x | Stainless steel wheels |
| 1 x | 2-speed scroll saw DSH |
| 1 x | Solid carbide stylus for engraving |
| 3 x | TORX-screwdrivers T6 |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | Diamond Grinding Bits 1,8mm |
| 2 x | Ball shaped milling cutters |
| 2 x | Angle polisher WP/E |
| 2 x | Ball-shaped diamond coated 1.2mm |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Aluminium Die-Cast |
| 1 x | Flame shaped milling cutters |
| 2 x | Belt sander BBS/S |
| 1 x | Rounding over cutter 6.4mm |
| 2 x | Ball-shaped diamond coated 2.2mm |
| 1 x | Tungsten carbide cutter 3.0mm |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Cone shaped milling cutter |
| 2 x | Ball-shaped diamond coated 3.2mm |
| 1 x | Slot cutter 5.0mm |
| 1 x | High quality corundum grinding bits |
| 1 x | Diamond Grinding Bits 1mm |
| 2 x | Bench drill machine TBM 220 |
| 2 x | Hot wire cutter THERMOCUT 230/E |
| 2 x | Grinding and Polishing Machine SP/E |
| 1 x | Half round cutter 13mm |
| 1 x | Diamond Twist Drills |
| 1 x | High quality corundum grinding bits |
| 2 x | Socket Wrenches 2.5 |
| 2 x | Tungsten carbide cutter 1.0mm |
| 2 x | Angle cutter 45 ° |
| 1 x | High quality corundum grinding bits |
| 1 x | Wolfram vanadium steel milling bits |
| 3 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | High quality corundum grinding bits |
| 1 x | Cylinder shaped milling cutters |
| 2 x | Replacement cutting wire for the THERMOCUT 12/E |
| 1 x | Solid carbide stylus for engraving |
| 1 x | Bench Circular Saw KS 230 |
| 1 x | 14-piece parallel supports set |
| 1 x | Tungsten carbide cutter 2.0mm |
| 2 x | Set of precision cutters |
| 1 x | Disc cutters |
| 4 x | TORX-screwdrivers T8 |
| 1 x | Chuck for TBM 220 |
| 1 x | Set of special steel cutters |
| 1 x | Slot cutter 6.5mm |
| 2 x | Belt sander BS/E |
| 1 x | Combi cutter 6.5/2.5mm |
| 2 x | |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Table Saw TKS 2500 SC |
| 1 x | Core box bit 3.2mm |
| 1 x | Blade for Steel and brass |
| 2 x | TORX-screwdrivers T4 |
| 1 x | Cylindrical cutters |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Slot cutter 3.2mm |
| 1 x | Rebating cutter 6.4mm |
| 1 x | Diamond Grinding Bits 5mm |
| 1 x | Felt polishers |
| 1 x | Felt polishers |
| 2 x | Delta sander OZI/E |
| 1 x | Polishing paste |
| 1 x | Inspector mirror |
| 2 x | Cotton polishers |
| 3 x | Cross-recess Screwdrivers 00 |
| 1 x | Felt polishers |
| 1 x | Socket Wrenches 3.0 |
| 1 x | Table Saw FET |
| 1 x | Cotton polishers |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | BGA-Bottom-221 |
| 1 x | Felt polishers |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | Cotton polishers |
| 1 x | Sanding Drums |
| 1 x | Sanding Discs |
| 1 x | DIL34/SSOP34-1 ZIF-CS |
| 1 x | Sanding Drums |
| 1 x | TORX-screwdrivers T7 |
| 3 x | Wrench Keys 1.3 |
| 1 x | Sanding bands 14x13mm |
| 1 x | Pensander PS 13 |
| 2 x | DIL40/MQFP52 ZIF ADuC812 |
| 2 x | DIL40/PLCC52 ZIF MCS51-2 |
| 1 x | Sanding bands 14x13mm |
| 2 x | DIL32/TSOP32 ZIF 11.8mm |
| 1 x | DIL40/PLCC44 ZIF AWM-1 |
| 1 x | Sanding Discs |
| 1 x | Disc Sander TG 125/E |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | DIL40/PLCC68 ZIF AWM-1 |
| 1 x | DIL40/PLCC52 ZIF AWM-2 |
| 2 x | DIL40/PLCC52 ZIF DS87C530 |
| 1 x | Nylon Fleece Brushes |
| 1 x | Sanding Drums |
| 1 x | DIL40/PLCC28 ZIF AWM-1 |
| 3 x | Wrench Keys 2.0 |
| 1 x | Sanding Drums |
| 1 x | DIL40/PLCC68 ZIF PIC-2 |
| 1 x | Disc Sander TG 250/E |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | DIL40/PLCC44 ZIF PIC-1 |
| 1 x | DIL40/PLCC52 ZIF AWM-1 |
| 1 x | DIL40/MLF64 ZIF-CS AVR-1 |
| 1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
| 1 x | DIL40/PLCC68 ZIF PIC-1 |
| 1 x | Earth wire |
| 1 x | TORX-screwdrivers T5 |
| 1 x | DIL34/SSOP34 ZIF 200 mil |
| 1 x | Cross-recess Screwdrivers 000 |
| 1 x | Inpection mirror 1-978 |
| 1 x | sanding belts for BBS/s Grit 150 |
| 2 x | DIL48/MQFP80 ZIF C500 |
| 1 x | DIL48/PLCC68 ZIF MCS51-2 |
| 1 x | DIL48/PLCC84 ZIF PLD-2 |
| 1 x | DIL48/PLCC52 ZIF MCS196-1 |
| 2 x | Precision lathe PD 250/E |
| 1 x | Multipurpose Vices Primus100 |
| 1 x | DIL48/PLCC68 ZIF MCS196-2 |
| 1 x | DIL48/PLCC68 ZIF MCS196-1 |
| 1 x | DIL48/PLCC68 ZIF MCS51-1 |
| 1 x | DIL48/LQFP64 ZIF M16C/Tiny |
| 1 x | DIL48/PLCC84 ZIF PLD-1 |
| 1 x | DIL48/PLCC68 ZIF PLD-1 |
| 1 x | BGA-Bottom-198 |
| 1 x | DIL48/PLCC68 ZIF 68HC11 |
| 1 x | BGA-Bottom-165 |
| 1 x | DIL48/PLCC84 ZIF H8-1 |
| 1 x | DIL48/LQFP64 ZIF M38039/M39049 |
| 1 x | DIL48/PLCC84 ZIF MCS196-2 |
| 1 x | DIL44/TSOP44-II ZIF 400mil |
| 1 x | DIL48/PLCC84 ZIF 68HC11 |
| 2 x | BGA-Bottom-194 |
| 1 x | DIL48/PLCC52 ZIF-CS 68HC05BX |
| 1 x | DIL44/TQFP44-3 ZIF |
| 1 x | Precision Vice FMZ |
| 2 x | Wrench Keys 2.5 |
| 1 x | Wrench Keys 0.7 |
| 2 x | Wrench Keys 0.9 |
| 3 x | BGA-Bottom-9 |
| 3 x | Contact bracelet with spiral cord |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | DIL44/PLCC44 ZIF |
| 1 x | DIL40/TQFP64 ZIF PIC-1A |
| 1 x | DIL44/MLF44-1 ZIF-CS |
| 1 x | DIL40/TQFP80-1 ZIF AWM-1 |
| 1 x | DIL42/SDIP42 ZIF 600mil |
| 1 x | DIL40/TQFP80-1 ZIF PIC-1A |
| 2 x | DIL44/PSOP44 ZIF 600 mil |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | DIL44/TQFP44-2 ZIF |
| 1 x | DIL40/TQFP64 ZIF EM652X |
| 1 x | DIL40/TQFP64 ZIF AVRmega-2 |
| 1 x | DIL44/PLCC44 ZIF-CS |
| 1 x | DIL40/TSOP40 ZIF-CS 12.4mm |
| 1 x | DIL44/TQFP44-1 Zif |
| 1 x | DIL44/QFN44-2 ZIF-CS |
| 1 x | DIL44/SOIC44 ZIF-CS |
| 1 x | DIL40/TSOP40 ZIF 18.4mm |
| 1 x | BGA-Bottom-195 |
| 1 x | DIL40/TSOP40 ZIF 18.4mm Flash-1 |
| 1 x | BGA-Bottom-101 |
| 1 x | Three piece thread cutting set |
| 1 x | BGA-Bottom-135 |
| 1 x | Bottom PSOP44 NOR-2 |
| 1 x | BGA-Bottom-115 |
| 1 x | BGA-Bottom-106 |
| 1 x | BGA-Bottom-10 |
| 1 x | BGA-Bottom-1 |
| 1 x | BGA-Bottom-140 |
| 2 x | BGA-Bottom-111 |
| 1 x | BGA-Bottom-11 |
| 1 x | BGA-Bottom-131 |
| 1 x | BGA-Bottom-149 |
| 1 x | BGA-0245/0241 |
| 1 x | BGA-0246/0243 |
| 1 x | BGA-0245/0242 |
| 1 x | Top PSOP44 ZIF 600mil |
| 1 x | BGA-Bottom-14 |
| 1 x | BGA-Bottom-150 |
| 1 x | BGA-Bottom-108 |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | BGA-Bottom-118 |
| 1 x | Bottom PSOP44 NOR-1 |
| 1 x | BGA-Bottom-153 |
| 1 x | BGA-Bottom-105 |
| 1 x | BGA-0246/0244 |
| 1 x | BGA-Bottom-151 |
| 1 x | DIL8/SOT23-6 ZIF-CS PIC |
| 1 x | BGA-Bottom-141 |
| 1 x | BGA-Bottom-145 |
| 1 x | BGA-Bottom-154 |
| 1 x | Broca de alta duração de 2.0mm |
| 1 x | BGA-Bottom-126 |
| 1 x | BGA-Bottom-15 |
| 1 x | BGA-Bottom-146 |
| 1 x | BGA-Bottom-103 |
| 1 x | Bottom PSOP44 NOR-3 |
| 1 x | Lathe System PD 400 |
| 1 x | BGA-Bottom-13 |
| 1 x | BGA-Bottom-132 |
| 1 x | BGA-Bottom-127 |
| 1 x | BGA-Bottom-144 |
| 2 x | DIL28/TSOP28 ZIF 11.8 mm |
| 1 x | DIL3/SOT23-3 ZIF-CS |
| 1 x | DIL28/QFP52 ZIF-CS SX52 |
| 1 x | DIL48/QFP100 ZIF MSP430-1 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
| 1 x | DIL40/QFP64-3 ZIF NEC-1 |
| 1 x | DIL40/QFP64 ZIF LPC-1 |
| 1 x | DIL28W/SOIC28 ZIF 300mil |
| 1 x | DIL40/QFP64-2 ZIF-CS NEC-1 |
| 1 x | DIL40/SOIC16 ZIF MB-1 |
| 1 x | DIL48/PQFP144 ZIF ST10-1 |
| 1 x | DIL48/QFP100 ZIF PLD-3 |
| 1 x | DIL40/QFP80 ZIF M37702 |
| 1 x | DIL40/SOIC20 ZIF AWM-1 |
| 1 x | DIL24W/SOIC24 ZIF 300mil |
| 1 x | DIL16W/SOIC16 ZIF 150mil |
| 1 x | DIL28/PLCC28 ZIF-CS |
| 1 x | DIL40/QFP64-4 ZIF NEC-1 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-2 |
| 1 x | DIL28/TSOP28 ZIF 11,8mm Flash |
| 1 x | DIL48/QFP100 ZIF PLD-4 |
| 1 x | DIL32/QFP64 ZIF H8-1 |
 |
| €35,856.83 |
