Top » Catalog » Lathes » Cutting tools » Knurling Holder

Knurling Holder

There are no products available in this category.

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
  Acessories for OPTI D250X550
  Cutting tools->
    Cutting tools
    Inserts->
    Knurling Holder
    Sets of Cutting tools
  Optimum Lathes
  Optimum-Quantum accessories->
  Proxxon Lathes
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	Diamond Twist Drills
2 x	Diamond Cutting Discs
2 x	Cylindrical cutters
2 x	Diamond Grinding Bits 1,8mm
2 x	Diamond Cutting Discs
2 x	Diamond cutting blade for OZI
2 x	Diamond blade
1 x	Diamond-coated cutting and roughing disc
1 x	Disc Sander TG 250/E
2 x	Diamond blade for MBS 240/E
2 x	Diamond Cutting Discs
2 x	Fibre-Cut Discs
1 x	Flexishaft MICROMOT 110/P
1 x	Cutting disc, with reinforcement
1 x	Centre Turning Attachment
2 x	Fibre-Cut Discs
1 x	Flap Wheels
1 x	Conjunto de três brocas de ponto
1 x	Cups brushes
2 x	Footswitch FS
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Half round cutter 13mm
2 x	Fibre-Cut Discs
1 x	Cotton polishers
1 x	Corundum sanding discs for LWS
1 x	Fibre-Cut Discs
1 x	HSS drill bits 1.2mm
1 x	Grinding mop cylinder grit 120
1 x	Flexible polishing pad set
2 x	Dividing attachment TA 230 for PF 250
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	HSS drill bits 1.0mm
2 x	Fibre-Cut Discs
1 x	Tungsten carbide drills Ø1mm
1 x	Flame shaped milling cutters
1 x	Blade holders for DS 460
1 x	Gear Chuck
1 x	Cotton polishers
1 x	Tungsten carbide drills Ø1,5mm
2 x	Coarse-toothed (18 TPI per 25mm)
1 x	Cylinder shaped milling cutters
1 x	Felt polishers
2 x	Four Jaw Chuck
1 x	Flexishaft MICROMOT 110/BF
1 x	Sanding bands 14x13mm
1 x	Fluted filter for CW-matic
1 x	Sanding Discs
1 x	Felt polishers
1 x	Grinding mop cylinder grit 80
1 x	HSS drill bits 0.8mm
1 x	High quality corundum grinding bits
1 x	Nylon Fleece Brushes
1 x	Engraving tool GG
1 x	Corundum fan sander for LWS
1 x	Cut off/mitre saw KGS 80
2 x	Fibre-Cut Discs
1 x	Corundum sanding discs for LWS
1 x	Tungsten carbide drills Ø2mm
1 x	Fine dust paper filter for CW-matic
1 x	Grinding mop cylinder grit 120
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Screwdriver bit set. 49-piece.
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Fixed Steady
1 x	Grinding and Polishing Machine SP/E
1 x	High quality corundum grinding bits
1 x	Cylinder sander WAS/E
1 x	Flexible silicon discs
1 x	Felt polishers
2 x	Crosscut 'Super-Cut' blade
1 x	Flexible silicon discs
1 x	Sanding Drums
1 x	Felt polishers
1 x	Flexible silicon discs
1 x	Grinding mop cylinder grit 240
1 x	Five piece HSS chisel set
1 x	Supercut jig saw blades of special steel
1 x	14-piece parallel supports set
1 x	Combi cutter 6.5/2.5mm
1 x	Rounding over cutter 6.4mm
1 x	Broca de alta duração de 2.6mm
1 x	Mill/Drill Unit BFB 2000.
1 x	MICROMOT tool holder
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Insert LGTN-2
1 x	Sanding pads for OZI 220/E grit 240
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Diamond Cutting Discs
1 x	Blade for Steel and brass
1 x	HSS cutting blade for OZI
1 x	Jig saw blades made of HSS
1 x	Rebating cutter 6.4mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	V-slot cutter 6.5mm
2 x	HSS immersion saw blades for OZI
1 x	Replacement belts for BSL 220/E
1 x	Aluminium Die-Cast
1 x	Slot cutter 6.5mm
1 x	TIP SPT-6
1 x	Broca de alta duração de 0.7mm
1 x	Three-jaw steel drill chuck
1 x	Broca de alta duração de 3.0mm
1 x	TIP SPT-9
1 x	Broca de alta duração de 2.7mm
1 x	MICROMOT drill stand MB 200
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Solid carbide saw blade

€3,451.94

Quick Find

We Accept

What's New?

Professional set for finish grinding and polishing
€27.56

Languages