| 1 x | Broca de alta duração de 2.5mm |
| 1 x | Broca de alta duração de 0.8mm |
| 1 x | Broca de alta duração de 2.2mm |
| 1 x | Broca de alta duração de 2.4mm |
| 1 x | Broca de alta duração de 0.3mm |
| 1 x | Broca de alta duração de 1.4mm |
| 1 x | broca de alta duração de 0,2mm |
| 1 x | Broca de alta duração de 0.4mm |
| 1 x | Broca de alta duração de 0.9mm |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | Broca de alta duração de 0.5mm |
| 1 x | broca de alta duração de 0,6mm |
| 1 x | Broca de alta duração de 1.1mm |
| 1 x | Broca de alta duração de 2.1mm |
| 1 x | Broca de alta duração de 1.3mm |
| 1 x | Broca de alta duração de 1.2mm |
| 1 x | Broca de alta duração de 1.5mm |
| 1 x | Micro Compound Table KT 70 |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | 14-piece parallel supports set |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | Three-jaw steel drill chuck |
| 2 x | Footswitch FS |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | Flexishaft MICROMOT 110/P |
| 1 x | Aluminium Die-Cast |
| 1 x | Flexishaft MICROMOT 110/BF |
| 1 x | MICROMOT drill stand MB 200 |
| 1 x | MICROMOT steel collet set |
| 1 x | MICROMOT tool holder |
| 1 x | Grinding mop cylinder grit 240 |
| 2 x | Belt sander BBS/S |
| 1 x | Slot cutter 6.5mm |
| 1 x | Rounding over cutter 6.4mm |
| 1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
| 1 x | CRIMPING PLIERS/WIRE STRIPPER |
| 1 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
| 1 x | magnifier 3.25 x Ø 45mm with additional lens |
| 1 x | Grinding mop cylinder grit 80 |
| 2 x | PLCC Puller |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Slot cutter 3.2mm |
| 3 x | IC tweezers |
| 1 x | Step clamps made of steel |
| 1 x | Tungsten carbide cutters set |
| 1 x | Spare cutting wire |
| 1 x | Slot cutter 5.0mm |
| 1 x | Wood Lathe DB450 |
| 1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
| 2 x | surface planing and thicknessing ADH 200 |
| 1 x | Diamond-coated cutting disc for MIC |
| 1 x | Table Sawr TKS 315 E |
| 1 x | 10-piece wood router cutter set |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | BIT-SET |
| 2 x | surface planing and thicknessing ADH 250 |
| 1 x | Angle cutter 45 ° |
| 1 x | Wood Lathe DB900 |
| 1 x | Professional polishing sponge |
| 1 x | Conj 5 pinças ESD |
| 1 x | Precision steel vice PM 40 |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Replacement cutting disc for MICRO cutter MIC |
| 2 x | Super-fine sanding discs grain 400 |
| 2 x | Vacum SAA 901 |
| 1 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
| 1 x | Half round cutter 13mm |
| 1 x | Table Saw TKS 2500 SC |
| 2 x | sanding belts for BBS/s Grit 240 |
| 2 x | Tungstein carbide rasp - and cutting disc |
| 2 x | sanding belts for BBS/s Grit 80 |
| 1 x | Core box bit 3.2mm |
| 1 x | Grinding mop cylinder grit 120 |
| 2 x | Machine Vice MS 4 |
| 1 x | Long neck angle milling/drilling unit LWB 220/E |
| 1 x | MICROMOT 50/E |
| 1 x | Replacement belts for BSL 220/E |
| 2 x | Tungsten Carbide Tipped (TCT) |
| 1 x | quantum revolving center CM2 |
| 1 x | EUROline side cutter pointed head |
| 1 x | Brass contact cleaner brush |
| 1 x | Bench drill press TBH |
| 1 x | MICROMOT 230/E |
| 1 x | Replacement belts for BSL 220/E |
| 2 x | 6pcs Double Open End wrench set |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Silicon-Carbide. |
| 1 x | EUROline round nose pliers |
| 1 x | Lambswool polishing disc |
| 1 x | 3-jaw chuck centrically clamping 125mm |
| 2 x | Backing disc for LWS |
| 1 x | EUROline mini side cutter |
| 1 x | PRINTER 200ml |
| 1 x | Lathe System PD 400 |
| 1 x | Sanding fleece for LWS |
| 1 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | Morse taper MT2 - B16 |
| 1 x | Corundum fan sander for LWS |
| 1 x | Precision drill grinder FBS 12/EF |
| 1 x | EUROline mini side cutter |
| 1 x | FREEZER-TOP 200ml |
| 2 x | sanding belts for BBS/s Grit 150 |
| 1 x | EUROline end cutter |
| 1 x | MICROMOT Mains Adapter NG 2/S |
| 2 x | Cutting disc, with reinforcement |
| 1 x | Super-fine sanding discs grain 2000 |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | EUROline flat nose pliers |
| 1 x | Corundum sanding discs for LWS |
| 1 x | EUROline snipe nose pliers |
| 1 x | SCREEN 200ml |
| 1 x | Cutting tool 10 mm |
| 1 x | Precision Drill/Grinder FBS 240/E |
| 1 x | EUROline top cutter |
| 1 x | Tool holder type D for SWH 1-A |
| 1 x | Face clamping disc for D250X550 |
| 1 x | Follow rest for D250X550 |
| 1 x | Professional Drill/Grinder IBS/E |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | MICROMOT 50 |
| 1 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | Corundum sanding discs for LWS |
| 2 x | Lathe tools 10mm pastilhados |
| 1 x | Quick-action tool holder kit SWH AA |
| 1 x | Collet chuck ER25 for D250X550 |
| 1 x | EUROline set of pliers |
| 1 x | EUROline side cutter rounded head |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 1 x | Three piece thread cutting set |
| 1 x | Collet chuck ER32 for D250X550 |
| 1 x | centrically clamping 125mm |
| 1 x | ANTISTATIC 200ml |
| 2 x | Glass fibre contact cleaner brush |
| 1 x | Polishing Set |
| 1 x | MICRO Miller FF 500 |
| 1 x | POLISHER 200ml |
| 1 x | Precision quick-action drill chuck 0-13mm B16 |
| 1 x | MICRO Miller FF 230 |
| 1 x | MICRO Miller MF 70 |
| 1 x | FREEZER-BR 200ml |
| 1 x | Long neck straight drill/grinder LB/E |
| 1 x | MICROMOT 50/EF |
| 1 x | Tool holder type H for SWH 1-A |
| 1 x | DUSTER-BR 200ml |
| 1 x | Steady rest for D250X550 |
| 1 x | Hot wire cutter THERMOCUT 230/E |
| 1 x | Corundum fan sander for LWS |
| 1 x | Bench drill machine TBM 220 |
| 1 x | EUROline mini side cutter |
| 2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | Disc Sander TG 250/E |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | Diamond cutting blade for OZI |
| 1 x | Five piece HSS chisel set |
| 2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | DEGRESER 200ml |
| 1 x | Delta sander OZI/E |
| 1 x | Spiral blade. 125mm long with plain ends (without pins). |
| 2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | Self-adhesive silicone film for easy sanding disc replacement |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | Chuck for TBM 220 |
| 2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | Sanding pads for OZI 220/E grit 80 |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Solid carbide saw blade |
| 1 x | Blade holders for DS 460 |
| 1 x | VIDEOCLEAN 200ml |
| 1 x | Jig saw blades made of HSS |
| 2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Hand magnifier with LED light 3X |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | PLCC Extractor |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | FLUX-OFF 400ml |
| 2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | Warding files set, 6pcs |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | Polishing machine PM 100 |
| 1 x | Crosscut 'Super-Cut' blade |
| 1 x | HSS cutting blade for OZI |
| 1 x | Pensander PS 13 |
| 1 x | FLUX DISPENSING PEN, LEAD FREE |
| 1 x | Angle polisher WP/E |
| 1 x | Long neck angle grinder LHW |
| 1 x | Belt sander BS/E |
| 1 x | Tungsten tipped saw blade |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
| 1 x | Router base OFV |
| 1 x | Cylinder sander WAS/E |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | CD-CLEANER 200ml |
| 1 x | |
| 1 x | Super-Cut |
| 1 x | Blade for Wood and Plastics |
| 1 x | Tool holder for rotary tools |
| 1 x | Precision Vice FMZ |
| 1 x | Super safety and specialty bit set, 75-piece |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
 |
| €18,536.69 |
.jpg "Super safety and specialty bit set, 75-piece")
