1 x | Disc Sander TG 125/E |
2 x | Belt sander BBS/S |
1 x | Multipurpose Vices Primus100 |
1 x | Universal and oil siphoning pump AP 12 |
1 x | MICROMOT 230/E |
1 x | Precision Vice FMZ |
1 x | Professional Drill/Grinder IBS/E |
1 x | Precision Vice FMS 75 |
1 x | MICRO Miller MF 70 |
1 x | MICROMOT 50/E |
2 x | DIL40/QFP100 ZIF AVR-1 |
1 x | Super safety and specialty bit set, 75-piece |
1 x | DIL16W/SOIC16 ZIF 300mil |
1 x | Lathe System PD 400 |
1 x | Precision steel vice PM 40 |
1 x | HSS boring tool set, 6 pieces |
1 x | Precision lathe PD 250/E |
1 x | Machine Vice MS 4 |
1 x | Long neck angle milling/drilling unit LWB 220/E |
1 x | Long neck straight drill/grinder LB/E |
1 x | MICROMOT 50/EF |
1 x | Multipurpose Vices Primus 75 |
1 x | Precision drill grinder FBS 12/EF |
2 x | Bench drill machine TBM 220 |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | MICROMOT 50 |
1 x | Screwdriver bit set. 49-piece. |
2 x | BGA-0246/0243 |
1 x | Mill/Drill System BFW 40/E |
1 x | MICRO Miller FF 500 |
1 x | Precision Drill/Grinder FBS 240/E |
1 x | MICRO Miller FF 230 |
1 x | Three piece thread cutting set |
2 x | Bench drill press TBH |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Angle polisher WP/E |
1 x | DIL28/PLCC28 ZIF |
1 x | |
1 x | Scroll saw DS 230/E |
1 x | MICRO Band Saw MBS 240/E |
1 x | MICRO cutter MIC |
1 x | 14-piece parallel supports set |
1 x | MICRO shaper MP 400 |
2 x | Ball-shaped diamond coated 3.2mm |
1 x | Blade for Steel and brass |
2 x | OPTI BF16 Vario |
1 x | Aluminium Die-Cast |
2 x | Ball-shaped diamond coated 2.2mm |
2 x | Bench Circular Saw KS 230 |
2 x | DIL28/TSOP28 ZIF 11,8mm Flash |
2 x | Bottom PSOP44 NOR-3 |
1 x | Jig saw STS 12/E |
2 x | 10-piece wood router cutter set |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Belt sander BS/E |
2 x | DIL40/MLF64 ZIF-CS AVR-1 |
2 x | 2-speed scroll saw DSH |
1 x | MICRO woodturning lathe DB 250 |
1 x | Thicknesser DH 40 |
2 x | Angle cutter 45 ° |
1 x | Surface planer AH 80 |
1 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | Motor-driven carving device MSG |
2 x | Ball-shaped diamond coated 1.2mm |
2 x | Ball shaped milling cutters |
1 x | Cut off/mitre saw KGS 80 |
1 x | Table Saw FET |
1 x | Super jig saw STS/E |
1 x | Backing disc for LWS |
1 x | Universal holder UHZ |
2 x | DIL32/MLF32-1 ZIF |
1 x | DIL44/MLF44-1 ZIF-CS |
1 x | Router base OFV |
1 x | Hot wire cutter THERMOCUT 650 |
2 x | Bottom PSOP44 NOR-2 |
1 x | Hot wire cutter THERMOCUT 12/E |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | MICRO Heat gun MH 550 |
1 x | Beeprog2C |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Compact workshop vacuum cleaner CW-matic |
1 x | DIL48/TSOP56 ZIF 18.4mm Flash-1 |
2 x | DIL40/QFP64-3 ZIF NEC-1 |
1 x | Complete Engraving Kit with trial glass |
1 x | MICROFLAM gas soldering set MGS |
1 x | MICROFLAME burner MFB/E |
1 x | MICRO-screwdrivers |
1 x | Engraving tool GG |
1 x | MICROMOT glue gun HKP 220 |
1 x | BGA-Bottom-13 |
1 x | BGA-Bottom-132 |
1 x | SCMT09T304 |
1 x | BGA-Bottom-150 |
1 x | BGA-Bottom-140 |
1 x | DIL16/SOIC16-1 ZIF 170mil |
1 x | BGA-Bottom-223 |
1 x | BGA-Bottom-146 |
1 x | TCMT090204 |
1 x | BGA-Bottom-138 |
1 x | SCMT060204 |
1 x | BGA-Bottom-127 |
1 x | TU 2404 |
1 x | ESD Brushe |
1 x | Turning inserts SCMT09T304 |
2 x | Precision quick-action drill chuck 0-8mm B16 |
1 x | Turning inserts CCMT09T304 |
1 x | TU 2004V |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | BGA-Bottom-9 |
1 x | Threading inserts 60º |
1 x | quantum revolving center CM2 |
1 x | BGA-Bottom-151 |
1 x | ESD Brushe |
1 x | Revolving center with replacement lathe centers |
1 x | BGA-Top-4 ZIF-CS |
1 x | DIL18W/SOIC18 ZIF 300mil |
1 x | Threading inserts 60º |
1 x | RT200 - Horizontal-vertical circular dividing table |
2 x | DIL40/QFP64-4 ZIF NEC-1 |
1 x | BGA-Bottom-5 |
2 x | DIL48/QFP100 ZIF MB90F-1 |
1 x | RT100 - Horizontal-vertical circular dividing table |
1 x | quantum revolving center CM1 |
1 x | Threading inserts 60º |
1 x | TU 1503V |
1 x | RT150 - Horizontal-vertical circular dividing table |
1 x | BGA-Top-132 ZIF-CS |
2 x | Precision quick-action drill chuck 0-16mm B16 |
1 x | TCMT110204 |
1 x | 6-piece set of ESD/EGB tweezers |
1 x | Turning inserts WCMX050308F |
1 x | BGA-Bottom-215 |
2 x | IC Test clip 20 pins |
1 x | BGA-Bottom-2 |
1 x | BGA-Bottom-195 |
2 x | Pinça SOIC de 8 pinos |
1 x | DIL28/QFP64 ZIF H8/3644 |
1 x | BGA-Bottom-216 |
1 x | DIL48/QFP100-1 ZIF NEC-3 |
1 x | BGA-Bottom-208 |
1 x | DIL28W/SOIC28 ZIF 300mil |
1 x | ESD Tweezers 5-194 |
1 x | ESD Tweezers 5-193 |
1 x | BGA-Bottom-209 |
2 x | DIL32/QFP64 ZIF H8-1 |
1 x | Floor cover ESD |
1 x | BGA-Bottom-199 |
1 x | BGA-Bottom-196 |
1 x | DIL32/PLCC32 ZIF-CS NOR-1 |
2 x | DIL28/QFN28-2 ZIF-CS |
1 x | ESD Tweezers 5-192 |
1 x | Conj 5 pinças ESD |
1 x | BGA-Bottom-207 |
1 x | ESD Tweezers 5-195 |
1 x | DIL28/TSSOP28 ZIF 170mil |
3 x | DIL28/QFP52 ZIF-CS SX52 |
2 x | Side cutters EUROline-Conductive |
1 x | ESD Tweezers 5-191 |
1 x | BGA-Bottom-198 |
1 x | DIL14W/SOIC14 ZIF 150mil |
1 x | WCMT050308 |
1 x | Turning inserts VCMT070204 |
1 x | BGA-Bottom-202 |
1 x | DIL32/SDIP64-1 ZIF Toshiba-BM1136 |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
1 x | DIL48/QFP100 ZIF PLD-4 |
1 x | 6-piece screwdriver set ESD |
1 x | Top PSOP44 ZIF 600mil |
1 x | DIL40/QFP64-1 ZIF-CS NEC-1 |
1 x | DIL40/QFP64 ZIF LPC-1 |
1 x | DIL48/QFP100 ZIF PLD-2 |
1 x | DIL40/QFP80 ZIF M37702 |
1 x | DIL48/QFP100 ZIF PLD-3 |
1 x | DIL48/QFP100 ZIF PLD-1 |
1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
1 x | DIL40/QFP144 ZIF H8S-1 |
1 x | Crocodile clip |
1 x | 6-piece socket wrenches ESD |
1 x | DIL40/QFP144 ZIF LPC-1 |
1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
1 x | DIL48/QFP100 ZIF NEC-1 |
1 x | Contact bracelet with spiral cord |
1 x | Earth wire with dummy Schunko-plug |
1 x | DIL16/SOIC16 ZIF 200 mil |
1 x | DIL40/QFP64-2 ZIF-CS NEC-1 |
1 x | DIL28/PLCC84 ZIF HS538ESC01H |
1 x | DIL48/MQFP80 ZIF C500 |
1 x | Earth wire |
1 x | Earthing module |
1 x | DIL44/PSOP44 ZIF 600 mil |
1 x | 6-piece wrench key set ESD |
1 x | DIL40/MQFP52 ZIF ADuC812 |
1 x | 6-piece TORX-screwdriver-set ESD |
1 x | DIL48/MQFP80 ZIF C164 |
1 x | DIL48/TSOP56 ZIF 18.4mm Flash-5 |
1 x | DIL48/QFP100 ZIF NEC-2 |
1 x | 6-piece screwdriver and cross-recess set ESD |
1 x | Earth wire |
2 x | 4-jaw chuck individually clamping 80mm |
2 x | Precision magnetic gauge stand |
1 x | DIL24/TSSOP24 ZIF 170mil |
2 x | Precision quick-action drill chuck 0-13mm B16 |
1 x | precision machine vices FMS200 |
2 x | 3-jaw chuck centrically clamping 100mm |
1 x | Snipe nose pliers 45º EUROline-Conductive |
2 x | CM2 - B16 - M10 |
2 x | Dial gauge |
1 x | lathe tools 8mm |
2 x | 3-jaw chuck centrically clamping 80mm |
2 x | Morse taper MT3 - B16 |
1 x | IT 200 - Indirect dividing attachment |
1 x | PLCC Extractor |
1 x | BGA-Bottom-11 |
1 x | DIL20W/SOIC20 ZIF 300mil |
1 x | precision machine vices FMS100 |
1 x | OPTI BF20 VARIO |
1 x | lathe tools 12mm |
1 x | OPTI BF20L VARIO |
2 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | Round nose pliers 45º EUROline-Conductive |
4 x | Cutter head for copy and surface milling MT3 |
1 x | Flat nose pliers 45º EUROline-Conductive |
1 x | Cutting tool 10 mm |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | DCMT070204 |
1 x | End milling cutter kit HSS 20 pcs |
1 x | End side cutters EUROline-Conductive |
1 x | End milling cutter kit HSS 12 pcs |
2 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | Cutting tool 8 mm |
2 x | 3-jaw chuck centrically clamping 125mm |
1 x | Cutting tool HM 20 mm |
2 x | Polishing felt, medium hard |
2 x | 4-jaw chuck individually clamping 125mm |
1 x | DIL48/QFP112 ZIF HCS12-1 |
1 x | lathe tools 10mm |
2 x | Morse taper MT2 - B16 |
1 x | 3-jaw chuck centrically clamping 160mm |
1 x | precision machine vices FMS150 |
1 x | Mini side cutters EUROline-Conductive |
1 x | Mini side cutters EUROline-Conductive |
1 x | centrically clamping 100mm |
1 x | IT 150 - Indirect dividing attachment |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Cutting tool 16 mm |
1 x | precision machine vices FMS125 |
2 x | 4-jaw chuck individually clamping 100mm |
1 x | Cutter head for copy and surface milling MT2 |
1 x | Mini side cutters EUROline-Conductive |
1 x | End side cutters 45º EUROline-Conductive |
1 x | ACCENT SERVICE TOOLS SET |
3 x | Broca de alta duração de 2.1mm |
1 x | DIL48/QFP80 ZIF-CS Z8F-1 |
1 x | EUROline-Conductive set of pliers |
3 x | Broca de alta duração de 2.0mm |
3 x | Broca de alta duração de 2.4mm |
1 x | DIL24/QSOP24 ZIF 150mil |
1 x | DIL48/QFP64 ZIF PLD-1 |
1 x | BGA-0246/0244 |
1 x | Disc cutters |
1 x | DIL48/QFP208 ZIF PLD-1 |
1 x | HSS drill bits 1.0mm |
1 x | HSS drill bits 0.8mm |
1 x | DIL48/QFP64 ZIF 68HC-2 |
2 x | BeeHive208S |
1 x | Cylindrical cutters |
1 x | Set of precision cutters |
3 x | Broca de alta duração de 2.3mm |
1 x | Set of special steel cutters |
1 x | HSS drill bits 1.6mm |
1 x | Tungsten carbide drills Ø2mm |
1 x | Tungsten carbide drills Ø1mm |
1 x | Wolfram vanadium steel milling bits |
2 x | Tungsten carbide cutter 3.0mm |
1 x | Tungsten carbide cutters set |
1 x | HSS twist drill set to DIN 338 |
1 x | Conjunto de três brocas de ponto |
1 x | Wolfram vanadium steel milling bits |
1 x | Cone shaped milling cutter |
1 x | Broca de alta duração de 0.9mm |
1 x | Broca de alta duração de 1.1mm |
1 x | HSS drill bits 1.2mm |
1 x | Tungsten carbide cutter 1.0mm |
1 x | Solid carbide stylus for engraving |
1 x | Tungsten carbide drills Ø1,5mm |
1 x | broca de alta duração de 0,6mm |
1 x | Flame shaped milling cutters |
1 x | Solid carbide stylus for engraving |
1 x | HSS twist drill set with centring pin |
1 x | Tungsten carbide cutter 2.0mm |
1 x | Cylinder shaped milling cutters |
1 x | Sanding Discs |
1 x | Combi cutter 6.5/2.5mm |
1 x | Nylon Fleece Brushes |
1 x | Flap Wheels |
1 x | Sanding Drums |
1 x | Rebating cutter 6.4mm |
1 x | Core box bit 3.2mm |
1 x | Slot cutter 5.0mm |
1 x | Flap Wheels |
1 x | Slot cutter 3.2mm |
1 x | Half round cutter 13mm |
1 x | Sanding Drums |
1 x | Slot cutter 6.5mm |
1 x | Sanding bands 14x13mm |
1 x | DIL48/QFP80-1 ZIF MCS51-1 |
1 x | Sanding Drums |
1 x | Rounding over cutter 6.4mm |
1 x | Broca de alta duração de 3.0mm |
1 x | Sanding Drums |
1 x | Sanding bands 14x13mm |
1 x | Sanding Discs |
1 x | Edge cutter with pin 6.4mm |
1 x | V-slot cutter 6.5mm |
1 x | Felt polishers |
1 x | Flexible polishing pad set |
1 x | Flexible silicon discs |
1 x | Felt polishers |
1 x | Felt polishers |
1 x | Flexible silicon discs |
1 x | Flexible silicon discs |
2 x | Diamond Cutting Discs |
1 x | Cotton polishers |
1 x | Diamond Grinding Bits 5mm |
1 x | Diamond Grinding Bits 1,8mm |
1 x | Flexible polishing pad set |
2 x | Diamond Cutting Discs |
1 x | Cotton polishers |
1 x | Cotton polishers |
1 x | Polishing paste |
1 x | Diamond Twist Drills |
1 x | Diamond Grinding Bits 1mm |
1 x | Diamond Cutting Discs |
1 x | Diamond Grinding Bits 1,8mm |
1 x | DIL48/QFP144 ZIF PLD-1 |
1 x | Felt polishers |
2 x | Diamond Cutting Discs |
1 x | High quality corundum grinding bits |
1 x | High quality corundum grinding bits |
1 x | DIL48/QFP64 ZIF MSP430-1 |
1 x | Metal Cutting Blades |
1 x | High quality corundum grinding bits |
1 x | Fibre-Cut Discs |
1 x | High quality corundum grinding bits |
1 x | High quality corundum grinding bits |
1 x | High quality corundum grinding bits |
1 x | Fibre-Cut Discs |
1 x | Fibre-Cut Discs |
1 x | Fibre-Cut Discs |
|
€67,825.21 |