1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Professional polishing sponge |
1 x | MICRO shaper MP 400 |
1 x | Bench Circular Saw KS 230 |
1 x | Super-fine sanding discs grain 2000 |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Hot wire cutter THERMOCUT 12/E |
1 x | Lambswool polishing disc |
1 x | Microfibre cloth |
1 x | Cut off/mitre saw KGS 80 |
1 x | Thicknesser DH 40 |
1 x | Surface planer AH 80 |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Universal polishing paste |
1 x | Multiform grindstone |
1 x | Super jig saw STS/E |
1 x | Scroll saw DS 230/E |
1 x | Motor-driven carving device MSG |
1 x | Backing disc for LWS |
1 x | MICRO cutter MIC |
1 x | Super-fine sanding discs grain 400 |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | 2-speed scroll saw DSH |
2 x | Footswitch FS |
1 x | MICRO woodturning lathe DB 250 |
1 x | Jig saw STS 12/E |
1 x | Polishing felt, medium hard |
1 x | Super-fine sanding discs grain 000 |
1 x | |
1 x | MICRO Band Saw MBS 240/E |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Replacement carving blades for MSG |
1 x | Table Saw FET |
1 x | Spare cutting wire |
2 x | Professional set for finish grinding and polishing |
1 x | Flexishaft MICROMOT 110/P |
1 x | Blade guides separately |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | sanding belts for BBS/s Grit 80 |
1 x | Centre Turning Attachment |
1 x | Blade for Wood and Plastics |
1 x | Flexishaft MICROMOT 110/BF |
1 x | Angle cutter 45 ° |
1 x | Mill/Drill Unit BFB 2000. |
1 x | Tool holder for rotary tools |
1 x | Sanding pads for OZI 220/E grit 80 |
1 x | HSS boring tool set, 6 pieces |
1 x | Three piece thread cutting set |
1 x | sanding belts for BBS/s Grit 150 |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | HSS immersion saw blades for OZI |
1 x | Cutting disc, with reinforcement |
1 x | Combi cutter 6.5/2.5mm |
1 x | Fixed Steady |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | Slot cutter 3.2mm |
1 x | Multipurpose Vices Primus 75 |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | Lathe System PD 400 |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | MICROMOT extension cord. 300cm. |
1 x | Slot cutter 5.0mm |
1 x | V-slot cutter 6.5mm |
1 x | Precision Vice FMZ |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Diamond blade for MBS 240/E |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Super-Cut |
1 x | 14-piece parallel supports set |
1 x | MICROMOT tool holder |
1 x | Four Jaw Chuck |
1 x | 10-piece wood router cutter set |
1 x | Aluminium Die-Cast |
1 x | Precision lathe PD 250/E |
1 x | Precision Vice FMS 75 |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | Protective device for hand-operated MICROMOT |
2 x | Micro Compound Table KT 70 |
1 x | Gear Chuck |
1 x | MICROMOT drill stand MB 200 |
1 x | MICROMOT steel collet set |
1 x | Blade for Steel and brass |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Multipurpose Vices Primus100 |
1 x | Core box bit 3.2mm |
1 x | Rounding over cutter 6.4mm |
1 x | Edge cutter with pin 6.4mm |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | HSS immersion saw blades for OZI |
1 x | Half round cutter 13mm |
1 x | Collet Set for accurate use on round components |
1 x | Three-jaw steel drill chuck |
2 x | Precision steel vice PM 40 |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Diamond-coated cutting disc for MIC |
1 x | HSS cutting blade for OZI |
1 x | Diamond Coated |
1 x | Rebating cutter 6.4mm |
2 x | Machine Vice MS 4 |
1 x | Diamond cutting blade for OZI |
1 x | Slot cutter 6.5mm |
1 x | MICROMOT Mains Adapter NG 2/S |
1 x | Coarse-toothed (18 TPI per 25mm) |
1 x | Wood Lathe DB450 |
1 x | MICROMOT Mains Adapter NG 5/E |
2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Wood Lathe DB900 |
1 x | Tungsten carbide cutters set |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | surface planing and thicknessing ADH 200 |
1 x | Self-adhesive silicone film for easy sanding disc replacement |
1 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Table Saw TKS 2500 SC |
1 x | Screwdriver bit set. 49-piece. |
1 x | Table Sawr TKS 315 E |
1 x | Step clamps made of steel |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Universal and oil siphoning pump AP 12 |
1 x | Chuck for TBM 220 |
1 x | Blade holders for DS 460 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | surface planing and thicknessing ADH 250 |
1 x | Vacum SAA 901 |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
1 x | Universal holder UHZ |
1 x | MICROMOT Mains Adapter NG 2/E |
1 x | MICROMOT glue gun HKP 220 |
1 x | Replacement glue sticks for HKP 220 |
1 x | Diamond blade |
1 x | Tungsten tipped saw blade |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | sandpaper for PS 13 Grot 180 |
|
€13,999.63 |