| 1 x | Replacement carving blades for MSG |
| 1 x | Precision quick-action drill chuck 0-8mm B16 |
| 2 x | Flexishaft MICROMOT 110/P |
| 4 x | Footswitch FS |
| 2 x | MICROMOT steel collet set |
| 2 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 2 x | Hot wire cutter THERMOCUT 12/E |
| 2 x | 14-piece parallel supports set |
| 2 x | Mill/Drill Unit BFB 2000. |
| 2 x | sanding belts for BBS/s Grit 80 |
| 1 x | Engraving tool GG |
| 2 x | Router base OFV |
| 3 x | MICROFLAME burner MFB/E |
| 2 x | Precision quick-action drill chuck 0-10mm B16 |
| 3 x | Tungsten carbide cutters set |
| 1 x | Sanding Discs |
| 2 x | MICROMOT drill stand MB 200 |
| 2 x | Rounding over cutter 6.4mm |
| 1 x | Sanding bands 14x13mm |
| 3 x | Diamond-coated cutting disc for MIC |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | Universal holder UHZ |
| 1 x | Disc cutters |
| 2 x | Flexishaft MICROMOT 110/BF |
| 1 x | TU 1503V |
| 1 x | TU 2404 |
| 3 x | Tool holder for rotary tools |
| 1 x | MICROMOT tool holder |
| 2 x | Wolfram vanadium steel milling bits |
| 2 x | Diamond blade for MBS 240/E |
| 3 x | Diamond Coated |
| 1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | 3-jaw chuck centrically clamping 80mm |
| 1 x | Morse taper MT3 - B16 |
| 1 x | 4-jaw chuck individually clamping 125mm |
| 1 x | Set of special steel cutters |
| 2 x | Corundum bound cutting disc for LWS |
| 1 x | Fluted filter for CW-matic |
| 3 x | Tungsten Carbide Tipped (TCT) |
| 2 x | centrically clamping 125mm |
| 2 x | Cylinder shaped milling cutters |
| 1 x | CM2 - B16 - M10 |
| 1 x | Dial gauge |
| 3 x | Four Jaw Chuck |
| 1 x | MICRO Heat gun MH 550 |
| 2 x | Morse taper MT2 - B16 |
| 2 x | Tungsten carbide cutter 1.0mm |
| 2 x | Micro Compound Table KT 70 |
| 2 x | 3-jaw chuck centrically clamping 125mm |
| 1 x | MICROMOT glue gun HKP 220 |
| 1 x | Precision quick-action drill chuck 0-16mm B16 |
| 1 x | centrically clamping 100mm |
| 3 x | Three jaw chuck for the lathe DB 250 |
| 1 x | Lathe System PD 400 |
| 1 x | Flap Wheels |
| 1 x | MICRO-screwdrivers |
| 2 x | 6-piece socket wrenches ESD |
| 2 x | Antiallergical Tweezers 5-117-1 |
| 2 x | Safety Insulated Phillips Screwdriver 14-631VDE |
| 2 x | Blade for Steel and brass |
| 1 x | Follow rest for D250X550 |
| 1 x | High quality corundum grinding bits |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 2 x | 6-piece screwdriver and cross-recess set ESD |
| 2 x | 6-piece screwdriver and cross-recess set |
| 2 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Universal polishing paste |
| 2 x | ACCENT SERVICE TOOLS SET |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 3 x | High quality corundum grinding bits |
| 1 x | End side cutters 45º EUROline-Conductive |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | 6-piece wrench key set ESD |
| 1 x | Screwdriver 3.0 |
| 2 x | Hand Magnifier 2-293 |
| 2 x | EUROline flat nose pliers |
| 1 x | Gear Chuck |
| 1 x | Side cutters 160mm |
| 1 x | Side cutters 160mm |
| 3 x | HSS drill bits 1.2mm |
| 3 x | High quality corundum grinding bits |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Flexible silicon discs |
| 2 x | 6pcs Double Open End wrench set |
| 2 x | EUROline mini side cutter |
| 2 x | Antiallergical Tweezers 5-155-1 |
| 2 x | Antiallergical Tweezers 5-121-1 |
| 1 x | Angle cutter 45 ° |
| 1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
| 1 x | Metal Cutting Blades |
| 1 x | Ball shaped milling cutters |
| 2 x | Antiallergical Tweezers 5-125-1 |
| 1 x | ESD-handling set |
| 2 x | 6-piece screwdriver and cross-recess set |
| 2 x | Safety Insulated Phillips Screwdriver 14-632VDE |
| 1 x | Side cutters 195mm |
| 1 x | Sanding bands 14x13mm |
| 1 x | ESD Tweezers 5-195 |
| 2 x | Grinding mop cylinder grit 80 |
| 1 x | Safety insulated screwdrivers 14-603 VDE |
| 3 x | High quality corundum grinding bits |
| 2 x | Drill chuck with sliding sleeve for the tailstock |
| 2 x | sanding belts for BBS/s Grit 240 |
| 1 x | Centre Turning Attachment |
| 1 x | Round nose pliers 165mm |
| 1 x | Collet chuck ER32 for D250X550 |
| 2 x | 6-piece TORX-screwdriver-set |
| 1 x | Chuck for TBM 220 |
| 3 x | Diamond Cutting Discs |
| 2 x | Coarse-toothed (25 TPI per 25mm) |
| 3 x | magnifier 3.25 x Ø 45mm with additional lens |
| 2 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | Lathe chuck flange for D250X550 |
| 2 x | Milling cutter set (2 - 5mm) |
| 2 x | 6-piece screwdriver set ESD |
| 1 x | Screwdriver 2.5 |
| 1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
| 3 x | HSS drill bits 0.5mm |
| 2 x | End side cutters EUROline-Conductive |
| 1 x | Safety insulated screwdrivers 14-606 VDE |
| 1 x | Fibre-Cut Discs |
| 2 x | Ceramic tweezers 5-081 |
| 1 x | Safety insulated screwdrivers 14-604 VDE |
| 3 x | Slot cutter 5.0mm |
| 1 x | Sanding Drums |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | Felt polishers |
| 1 x | Cross-recess Screwdrivers Pozidriv 2 |
| 1 x | Tool holder type D for SWH 1-A |
| 2 x | High quality corundum grinding bits |
| 3 x | HSS drill bits 0.8mm |
| 1 x | Collet chuck ER25 for D250X550 |
| 1 x | V-slot cutter 6.5mm |
| 3 x | Tungsten carbide drills Ø1,5mm |
| 1 x | PVC-insulated tweezers 5-107-6 |
| 2 x | Felt polishers |
| 1 x | Three piece thread cutting set |
| 1 x | sandpaper for PS 13 Grot 180 |
| 2 x | Antiallergical Tweezers 5-107-1 |
| 1 x | Fibre-Cut Discs |
| 1 x | Sanding Drums |
| 1 x | ESD-handling ser 9-361 |
| 1 x | Screwdriver 4.0 |
| 1 x | Screwdriver 5.5 |
| 1 x | EUROline set of pliers |
| 1 x | Cutting tool 10 mm |
| 1 x | Super-Cut |
| 1 x | PLCC Puller |
| 1 x | ESD Tweezers 5-191 |
| 1 x | Side cutters 160mm |
| 1 x | PRECISION WIRE STRIPPER ESD-PLUS |
| 2 x | Edge cutter with pin 6.4mm |
| 2 x | 6-piece TORX-screwdriver-set ESD |
| 2 x | High quality corundum grinding bits |
| 1 x | ESD Brushe |
| 1 x | Backing disc for LWS |
| 1 x | Grinding mop cylinder grit 120 |
| 2 x | Slot cutter 6.5mm |
| 1 x | Screwdriver 2.5 |
| 1 x | Fibre-Cut Discs |
| 3 x | Replacement cutting wire for the THERMOCUT 12/E |
| 1 x | lathe tools 10mm |
| 2 x | HSS drill bits 1.0mm |
| 1 x | BGA-Bottom-157 |
| 1 x | Safety insulated screwdrivers 14-602 VDE |
| 1 x | Precision caliper square |
| 1 x | PVC-insulated tweezers 5-121-6 |
| 1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
| 1 x | Screwdriver 5.5 |
| 2 x | Cotton polishers |
| 1 x | |
| 1 x | MULTI 200ml |
| 1 x | Fixed Steady |
| 1 x | ESD Tweezers 5-193 |
| 1 x | DIL3/SOT23-3 ZIF-CS |
| 1 x | Three-jaw steel drill chuck |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Diamond-coated cutting and roughing disc |
| 2 x | Flexible polishing pad set |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | EUROline mini side cutter |
| 1 x | PLCC Extractor |
| 3 x | Flexible polishing pad set |
| 2 x | Diamond Cutting Discs |
| 1 x | Safety insulated screwdrivers 14-608 VDE |
| 1 x | 6-piece set of ESD/EGB tweezers |
| 1 x | Brass contact cleaner brush |
| 1 x | PVC-insulated tweezers 5-117-6 |
| 1 x | Safety Insulated Phillips Screwdriver 14-633VDE |
| 1 x | sandpaper for PS 13 Grit 400 |
| 1 x | Screwdriver 3.0 |
| 1 x | Side cutters 180mm |
| 1 x | Flame shaped milling cutters |
| 4 x | Slot cutter 3.2mm |
| 2 x | Tungsten carbide drills Ø1mm |
| 1 x | Hand magnifier with LED light 3X |
| 1 x | ESD Tweezers 5-192 |
| 1 x | Collet Set for accurate use on round components |
| 1 x | Milling cutter set (6 - 10mm) |
| 2 x | Blade guides separately |
| 1 x | Screwdriver 3.0 |
| 1 x | ESD Tweezers 5-194 |
| 1 x | Grinding and Polishing Machine SP/E |
| 1 x | Cylindrical cutters |
| 1 x | Cone shaped milling cutter |
| 1 x | ESD Brushe |
| 1 x | Cotton polishers |
| 1 x | Precision quick-action drill chuck 0-13mm B16 |
| 2 x | 6-piece screwdriver and cross-recess set |
| 3 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | EUROline round nose pliers |
| 1 x | Wolfram vanadium steel milling bits |
| 2 x | Five piece HSS chisel set |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Flexible silicon discs |
| 2 x | Plastic magnifying glass |
| 4 x | Rebating cutter 6.4mm |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Glass fibre contact cleaner brush |
| 2 x | Tungsten carbide drills Ø2mm |
| 1 x | Steady rest for D250X550 |
| 1 x | HSS twist drill set with centring pin |
| 1 x | EUROline mini side cutter |
| 2 x | Felt polishers |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | Tool holder type H for SWH 1-A |
| 3 x | Diamond Cutting Discs |
| 1 x | BIT-SET |
| 2 x | Core box bit 3.2mm |
| 1 x | Mini side cutters EUROline-Conductive |
| 2 x | Diamond Cutting Discs |
| 1 x | Solid carbide stylus for engraving |
| 1 x | Fibre-Cut Discs |
| 1 x | Safety Insulated Pozidriv Screwdriver 14-641VDE |
| 2 x | Cotton polishers |
| 1 x | Safety insulated screwdrivers 14-601 VDE |
| 1 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | Safety Insulated Phillips Screwdriver 14-634VDE |
| 1 x | Sanding Drums |
| 1 x | High quality corundum grinding bits |
| 2 x | 10-piece wood router cutter set |
| 2 x | Half round cutter 13mm |
| 1 x | Cross-recess Screwdrivers 000 |
| 1 x | Crimping plier for BNC |
| 1 x | Cross-recess Screwdrivers Pozidriv 1 |
| 1 x | Cross-recess Screwdrivers 1 |
| 2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | Wood Lathe DB450 |
| 1 x | Blade holders for DS 460 |
| 1 x | sandpaper for PS 13 Grit 240 |
| 3 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Cross-recess Screwdrivers 0 |
| 1 x | Flat nose pliers 160mm |
| 1 x | Pensander PS 13 |
| 1 x | Disc Sander TG 250/E |
| 1 x | EUROline snipe nose pliers |
| 1 x | EUROline side cutter rounded head |
| 1 x | Telephon pliers straight 200mm |
| 1 x | Tungsten tipped saw blade |
| 1 x | Solid carbide saw blade |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | Angle polisher WP/E |
| 1 x | Telephone pliers bent 165mm |
| 1 x | Spare cutting wire |
| 1 x | EUROline top cutter |
| 1 x | Telephone pliers bent 205mm |
| 1 x | Precision lathe PD 250/E |
| 1 x | Flat nose pliers 45º EUROline-Conductive |
| 1 x | Belt sander BS/E |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | Cross-recess Screwdrivers 0 |
| 1 x | Cross-recess Screwdrivers 00 |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | Diamond Twist Drills |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | Earth wire |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Machine Vice MS 4 |
 |
| €17,715.09 |
