3 x | 2-speed scroll saw DSH |
1 x | Backing disc for LWS |
3 x | 14-piece parallel supports set |
2 x | Ball-shaped diamond coated 3.2mm |
3 x | Diamond blade |
1 x | DIL40/TQFP44 ZIF PIC-1 |
1 x | DIL40/QFP64-4 ZIF NEC-1 |
1 x | DIL40/SOIC28 ZIF AWM-1 |
2 x | Diamond Twist Drills |
2 x | Three-jaw steel drill chuck |
1 x | Felt polishers |
2 x | Fibre-Cut Discs |
1 x | DIL40/TQFP44 ZIF AWM-1 |
2 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Felt polishers |
2 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | DIL40/SOIC20 ZIF AWM-1 |
1 x | Disc cutters |
2 x | Fluted filter for CW-matic |
1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
1 x | DIL40/PLCC68 ZIF AWM-1 |
1 x | DIL40/TSOP40 ZIF 18.4mm |
3 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Flap Wheels |
1 x | BGA-Bottom-208 |
3 x | Dividing attachment TA 230 for PF 250 |
1 x | DIL40/PLCC44 ZIF W-EPROM / MCS51 |
2 x | Replacement belts for BSL 220/E |
2 x | Silicon-Carbide. |
3 x | Lathe System PD 400 |
3 x | Fixed Steady |
3 x | Solid carbide saw blade |
1 x | Replacement belts for BSL 220/E |
2 x | Universal and oil siphoning pump AP 12 |
2 x | Coarse-toothed (18 TPI per 25mm) |
1 x | DIL40/QFP64-2 ZIF-CS NEC-1 |
3 x | Diamond Coated |
3 x | Crosscut 'Super-Cut' blade |
1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
1 x | Polishing Set |
2 x | Spare cutting wire |
3 x | Replacement glue sticks for HKP 220 |
1 x | DIL40/TQFP44-1 ZIF MCS51 |
2 x | |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
2 x | Fine dust paper filter for CW-matic |
3 x | Chuck for TBM 220 |
2 x | Diamond Grinding Bits 1,8mm |
1 x | Special Fused Alumina (Hardness N). |
1 x | DIL40/PLCC44 ZIF AWM-1 |
2 x | BGA-Bottom-115 |
1 x | DIL40/SDIP52 ZIF 55x |
1 x | DIL44/QFN44-2 ZIF-CS |
1 x | DIL40/TQFP80-1 ZIF AWM-1 |
2 x | Fibre-Cut Discs |
1 x | BGA-0246/0244 |
3 x | Delta sander OZI/E |
2 x | Diamond blade for MBS 240/E |
1 x | DIL44/SOIC44 ZIF-CS |
1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
3 x | Tungsten Carbide Tipped (TCT) |
2 x | Pensander PS 13 |
1 x | DIL34/SSOP34-1 ZIF-CS |
1 x | DIL40/SOIC20 ZIF MB95-1 |
3 x | Step clamps made of steel |
4 x | Compact workshop vacuum cleaner CW-matic |
1 x | DIL40/QFP64-3 ZIF NEC-1 |
1 x | DIL44/PLCC44 ZIF-CS |
2 x | Precision lathe PD 250/E |
1 x | DIL44/TQFP44-2 ZIF |
1 x | DIL40/VQFP64 ZIF AWM-1 |
3 x | Blade holders for DS 460 |
2 x | Super-Cut |
1 x | DIL40/QFP80 ZIF M37702 |
2 x | Fibre-Cut Discs |
1 x | Flame shaped milling cutters |
1 x | Diamond Cutting Discs |
3 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
3 x | Diamond Cutting Discs |
1 x | DIL40/TQFP64 ZIF CC-1 |
1 x | Drill chuck with sliding sleeve for the tailstock |
2 x | Disc Sander TG 125/E |
2 x | HSS boring tool set, 6 pieces |
3 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Super safety and specialty bit set, 75-piece |
4 x | Collet Set for accurate use on round components |
2 x | High quality corundum grinding bits |
2 x | Polishing felt, medium hard |
2 x | Hot wire cutter THERMOCUT 12/E |
2 x | MICRO Heat gun MH 550 |
2 x | Coarse-toothed (25 TPI per 25mm) |
2 x | Hot wire cutter THERMOCUT 650 |
1 x | Sanding bands 14x13mm |
1 x | HSS twist drill set with centring pin |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
2 x | Diamond Cutting Discs |
1 x | Professional Drill/Grinder IBS/E |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | Tungsten carbide cutter 3.0mm |
1 x | Blade guides separately |
1 x | High quality corundum grinding bits |
2 x | Precision steel vice PM 40 |
2 x | Tool holder for rotary tools |
1 x | Tungsten carbide cutter 1.0mm |
2 x | MICROFLAME burner MFB/E |
1 x | BGA-Bottom-196 |
2 x | Sanding Drums |
1 x | Steel cups |
1 x | Sanding Drums |
2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
2 x | Core box bit 3.2mm |
2 x | Jig saw STS 12/E |
2 x | Hot wire cutter THERMOCUT 230/E |
1 x | CM2 - B16 - M10 |
1 x | MICROFLAM gas soldering set MGS |
1 x | 3-jaw chuck centrically clamping 160mm |
1 x | Grinding mop cylinder grit 240 |
1 x | MICROMOT Mains Adapter NG 2/S |
1 x | Beeprog2C |
2 x | centrically clamping 125mm |
1 x | Cutter head for copy and surface milling MT2 |
2 x | 10-piece wood router cutter set |
1 x | Precision quick-action drill chuck 0-16mm B16 |
2 x | Complete Engraving Kit with trial glass |
3 x | Three piece thread cutting set |
2 x | Angle cutter 45 ° |
3 x | Grinding mop cylinder grit 120 |
1 x | Angle polisher WP/E |
1 x | DIL20W/SOIC20 ZIF 300mil |
1 x | Diamond Grinding Bits 1,8mm |
2 x | MICROMOT Mains Adapter NG 2/E |
2 x | Metal Cutting Blades |
1 x | Cylinder shaped milling cutters |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Grinding mop cylinder grit 80 |
2 x | Machine Vice MS 4 |
2 x | HSS drill bits 0.5mm |
2 x | Tungsten carbide drills Ø2mm |
1 x | Precision quick-action drill chuck 0-10mm B16 |
2 x | BGA-Bottom-106 |
2 x | Surface planer AH 80 |
1 x | High quality corundum grinding bits |
2 x | Centre Turning Attachment |
1 x | BGA-Bottom-201 |
2 x | Tungsten tipped saw blade |
1 x | Long neck angle milling/drilling unit LWB 220/E |
2 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Conjunto de três brocas de ponto |
1 x | BGA-Bottom-105 |
2 x | Long neck straight drill/grinder LB/E |
1 x | Screwdriver bit set. 49-piece. |
2 x | Digital caliper gauge 300 mm |
1 x | Precision quick-action drill chuck 0-10mm B16 |
3 x | Half round cutter 13mm |
1 x | sandpaper for PS 13 Grit 400 |
1 x | BGA-Bottom-140 |
2 x | Belt sander BS/E |
1 x | Set of precision cutters |
1 x | Morse taper MT2 - B16 |
1 x | Tungsten carbide drills Ø1mm |
2 x | Scroll saw DS 230/E |
1 x | centrically clamping 100mm |
1 x | Precision quick-action drill chuck 0-8mm B16 |
1 x | Wolfram vanadium steel milling bits |
1 x | High quality corundum grinding bits |
1 x | BGA-Bottom-102 |
3 x | Slot cutter 3.2mm |
3 x | Slot cutter 6.5mm |
1 x | HSS drill bits 1.0mm |
2 x | MICRO Band Saw MBS 240/E |
2 x | Jig saw blades made of HSS |
1 x | High quality corundum grinding bits |
2 x | Thicknesser DH 40 |
2 x | MICRO woodturning lathe DB 250 |
1 x | BGA-Bottom-211 |
2 x | Mill/Drill System BFW 40/E |
1 x | Diamond Grinding Bits 5mm |
1 x | Sanding Discs |
1 x | High quality corundum grinding bits |
1 x | Cups brushes |
2 x | Bench Circular Saw KS 230 |
1 x | BGA-Bottom-11 |
1 x | 4-jaw chuck individually clamping 80mm |
1 x | BGA-Bottom-214 |
1 x | Diamond Cutting Discs |
3 x | Cylinder sander WAS/E |
1 x | Steel brushes |
1 x | BGA-Bottom-145 |
2 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | HSS drill bits 0.8mm |
1 x | Stainless steel brushes |
1 x | HSS twist drill set to DIN 338 |
1 x | Set of special steel cutters |
1 x | Rounding over cutter 6.4mm |
1 x | Grinding mop cylinder grit 120 |
2 x | Brass brushes |
2 x | Cut off/mitre saw KGS 80 |
2 x | BGA-Bottom-108 |
1 x | MICROMOT Mains Adapter NG 5/E |
1 x | Tungsten carbide cutters set |
1 x | Fibre-Cut Discs |
1 x | BGA-Bottom-103 |
1 x | Saw blade made of high-alloy special steel |
1 x | Combi cutter 6.5/2.5mm |
1 x | Precision magnetic gauge stand |
1 x | Stainless steel cups |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | HSS drill bits 1.6mm |
1 x | BGA-Bottom-125 |
3 x | 4-jaw chuck individually clamping 125mm |
1 x | BGA-Bottom-10 |
1 x | Ball shaped milling cutters |
1 x | 4-jaw chuck individually clamping 100mm |
1 x | BGA-Bottom-135 |
3 x | Gear Chuck |
1 x | Solid carbide stylus for engraving |
1 x | Wheels brushes |
1 x | Four Jaw Chuck |
1 x | Tungsten carbide drills Ø1,5mm |
1 x | Bench drill press TBH |
2 x | BGA-Bottom-118 |
1 x | Bench drill machine TBM 220 |
2 x | Precision quick-action drill chuck 0-13mm B16 |
1 x | BGA-Bottom-15 |
1 x | Cutting disc, with reinforcement |
2 x | Super jig saw STS/E |
1 x | HSS drill bits 1.2mm |
2 x | Precision drill grinder FBS 12/EF |
1 x | Cutting tool 8 mm |
1 x | Cone shaped milling cutter |
2 x | Router base OFV |
2 x | Microfibre polishing wheel, 15-ply (100mm) |
2 x | Cutting tool 10 mm |
1 x | Solid carbide stylus for engraving |
3 x | Disc Sander TG 250/E |
2 x | MICRO cutter MIC |
1 x | High quality corundum grinding bits |
2 x | Slot cutter 5.0mm |
1 x | Morse taper MT3 - B16 |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | MICRO Miller MF 70 |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | precision machine vices FMS100 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Protective device for hand-operated MICROMOT |
1 x | HSS immersion saw blades for OZI |
1 x | lathe tools 10mm |
1 x | Corundum grinding disc for LWS |
1 x | Polishing machine PM 100 |
1 x | OPTI BF20L VARIO |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | MICROMOT drill stand MB 200 |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | Cutter head for copy and surface milling MT3 |
1 x | precision machine vices FMS200 |
1 x | Universal polishing paste |
1 x | DIL40/SOIC16 ZIF MB-1 |
2 x | precision machine vices FMS150 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | BGA-Top-4 ZIF-CS |
1 x | End milling cutter kit HSS 12 pcs |
1 x | Sanding fleece for LWS |
1 x | Grinding and Polishing Machine SP/E |
1 x | MICROMOT steel collet set |
1 x | Supercut jig saw blades of special steel |
1 x | Sanding Drums |
1 x | MICRO Miller FF 230 |
2 x | Flexishaft MICROMOT 110/BF |
1 x | Corundum fan sander for LWS |
1 x | BGA-Bottom-149 |
1 x | MICROMOT extension cord. 300cm. |
2 x | Micro Compound Table KT 70 |
1 x | Cutting tool HM 20 mm |
1 x | BGA-Bottom-192 |
1 x | Long neck angle grinder LHW |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | BGA-Bottom-2 |
1 x | MICROMOT 50/EF |
1 x | HSS immersion saw blades for OZI |
1 x | Milling cutter set (6 - 10mm) |
1 x | Table Saw FET |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
1 x | DCMT070204 |
1 x | MICRO-screwdrivers |
1 x | Corundum sanding discs for LWS |
1 x | Aluminium Die-Cast |
1 x | 3-jaw chuck centrically clamping 100mm |
1 x | Corundum fan sander for LWS |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Motor-driven carving device MSG |
1 x | sandpaper for PS 13 Grot 180 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Turning inserts WCMX050308F |
1 x | MICROMOT glue gun HKP 220 |
1 x | MICROMOT 230/E |
1 x | 3-jaw chuck centrically clamping 80mm |
1 x | Sanding fleece for LWS |
1 x | Sanding bands 14x13mm |
1 x | lathe tools 8mm |
1 x | BGA-Bottom-204 |
|
€40,709.43 |