1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
1 x | MICROMOT tool holder |
1 x | 6-piece wrench key set ESD |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | OPTI BF20 VARIO |
1 x | Replacement carving blades for MSG |
1 x | 6-piece screwdriver set ESD |
1 x | Conjunto de três brocas de ponto |
1 x | 6-piece TORX-screwdriver-set ESD |
1 x | Mill/Drill Unit BFB 2000. |
1 x | Broca de ponto 3.15 x 1.00 |
1 x | sanding belts for BBS/s Grit 240 |
1 x | MICROMOT extension cord. 300cm. |
1 x | Aluminium Die-Cast |
2 x | Micro Compound Table KT 70 |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Footswitch FS |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | Flexishaft MICROMOT 110/BF |
1 x | MICROMOT drill stand MB 200 |
1 x | sanding belts for BBS/s Grit 80 |
1 x | OPTI BF16 Vario |
1 x | ACCENT SERVICE TOOLS SET |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Self-adhesive silicone film for easy sanding disc replacement |
2 x | EUROline-Conductive set of pliers |
1 x | 14-piece parallel supports set |
1 x | Broca de ponto 8.00 x 3.15 |
1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Flexishaft MICROMOT 110/P |
1 x | MICROMOT steel collet set |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Three-jaw steel drill chuck |
1 x | Broca de ponto 6.30 x 2.50 |
1 x | Broca de ponto 3.15 x 1.25 |
1 x | OPTI BF20L VARIO |
1 x | Protective device for hand-operated MICROMOT |
1 x | sanding belts for BBS/s Grit 150 |
1 x | Broca de ponto 5.00 x 2.00 |
1 x | Multiform grindstone |
1 x | 6-piece socket wrenches ESD |
1 x | 6-piece screwdriver and cross-recess set ESD |
1 x | Earth wire |
1 x | Earthing module |
1 x | Multipurpose Vices Primus100 |
1 x | Grinding and Polishing Machine SP/E |
2 x | MICROMOT Mains Adapter NG 5/E |
1 x | Belt sander BBS/S |
1 x | Broca de alta duração de 0.8mm |
1 x | Collet Set for accurate use on round components |
1 x | Pensander PS 13 |
1 x | Earth wire with dummy Schunko-plug |
1 x | Delta sander OZI/E |
1 x | Broca de alta duração de 2.1mm |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Broca de alta duração de 2.0mm |
1 x | Universal and oil siphoning pump AP 12 |
1 x | BeeHive204 |
1 x | Broca de alta duração de 2.3mm |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Polishing machine PM 100 |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Three piece thread cutting set |
2 x | MICROMOT Mains Adapter NG 2/S |
1 x | Belt sander BS/E |
1 x | Broca de alta duração de 0.3mm |
1 x | Broca de alta duração de 0.9mm |
1 x | Broca de alta duração de 1.1mm |
1 x | broca de alta duração de 0,6mm |
1 x | Broca de alta duração de 1.2mm |
1 x | Precision Vice FMS 75 |
1 x | Disc Sander TG 250/E |
1 x | Hand magnifier with LED light 3X |
1 x | Broca de alta duração de 2.5mm |
1 x | Plastic magnifying glass |
1 x | Long neck angle grinder LHW |
1 x | Broca de alta duração de 1.4mm |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Broca de alta duração de 1.5mm |
1 x | Centre Turning Attachment |
2 x | Lathe System PD 400 |
1 x | magnifier 3.25 x Ø 45mm with additional lens |
1 x | Machine Vice MS 4 |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | Contact bracelet with spiral cord |
1 x | Screwdriver bit set. 49-piece. |
1 x | Hot wire cutter THERMOCUT 12/E |
1 x | Cutting disc, with reinforcement |
2 x | Precision steel vice PM 40 |
1 x | BeeHive208S |
1 x | Earth wire |
1 x | broca de alta duração de 0,2mm |
1 x | Angle polisher WP/E |
1 x | Precision Vice FMZ |
1 x | Tool holder for rotary tools |
1 x | Broca de alta duração de 0.5mm |
1 x | Cutter head for copy and surface milling MT3 |
1 x | Broca de alta duração de 2.2mm |
1 x | Broca de alta duração de 1.0mm |
1 x | Broca de alta duração de 2.4mm |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Gear Chuck |
1 x | Disc Sander TG 125/E |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Floor cover ESD |
2 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
2 x | CRIMPING PLIERS/WIRE STRIPPER |
2 x | Precision lathe PD 250/E |
1 x | Cutter head for copy and surface milling MT2 |
1 x | Broca de alta duração de 1.3mm |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | Broca de alta duração de 0.7mm |
1 x | Four Jaw Chuck |
3 x | Inspector mirror |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Crocodile clip |
1 x | Broca de alta duração de 0.4mm |
1 x | Hand Magnifier 2-293 |
1 x | HSS boring tool set, 6 pieces |
1 x | Fixed Steady |
1 x | Multipurpose Vices Primus 75 |
1 x | surface planing and thicknessing ADH 250 |
1 x | Slot cutter 6.5mm |
1 x | Magnetic base |
1 x | Solid carbide saw blade |
1 x | Super-Cut |
1 x | Half round cutter 13mm |
1 x | Diamond Coated |
1 x | HSS cutting blade for OZI |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | HSS immersion saw blades for OZI |
1 x | Diamond cutting blade for OZI |
1 x | Angle cutter 45 ° |
1 x | Slot cutter 5.0mm |
1 x | Special Fused Alumina (Hardness N). |
2 x | Inpection mirror 1-978 |
1 x | Rebating cutter 6.4mm |
1 x | Rounding over cutter 6.4mm |
1 x | ESD Brushe |
2 x | Glass fibre contact cleaner brush |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | Diamond blade |
1 x | 10-piece wood router cutter set |
1 x | V-slot cutter 6.5mm |
1 x | Crosscut 'Super-Cut' blade |
1 x | surface planing and thicknessing ADH 200 |
1 x | Polishing Set |
1 x | HSS immersion saw blades for OZI |
1 x | ESD Brushe |
1 x | Precision magnetic gauge stand |
1 x | Silicon-Carbide. |
1 x | Edge cutter with pin 6.4mm |
1 x | magnetic base 80kg |
1 x | Tungsten tipped saw blade |
3 x | Insulation Resistance Tester MG500 |
1 x | Core box bit 3.2mm |
2 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
1 x | Combi cutter 6.5/2.5mm |
1 x | ESD-handling set |
1 x | ESD-handling ser 9-361 |
1 x | Sanding pads for OZI 220/E grit 80 |
1 x | Slot cutter 3.2mm |
3 x | Insulation Resistance Tester MG125 |
1 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
2 x | Brass contact cleaner brush |
1 x | Saw blade made of high-alloy special steel |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Cutting tool 10 mm |
1 x | Diamond-coated cutting disc for MIC |
1 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | Mini side cutters EUROline-Conductive |
1 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | Collet chuck ER32 for D250X550 |
1 x | Tool holder type D for SWH 1-A |
1 x | Three jaw chuck for the lathe DB 250 |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Grinding mop cylinder grit 120 |
1 x | Face clamping disc for D250X550 |
1 x | |
1 x | centrically clamping 125mm |
1 x | Collet chuck ER25 for D250X550 |
1 x | Blade guides separately |
1 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Follow rest for D250X550 |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Grinding mop cylinder grit 80 |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Diamond blade for MBS 240/E |
1 x | Grinding mop cylinder grit 120 |
1 x | Grinding mop cylinder grit 240 |
1 x | Supercut jig saw blades of special steel |
1 x | End side cutters EUROline-Conductive |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Independent four jaw chuck for the DB 250 |
1 x | Precision quick-action drill chuck 0-13mm B16 |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Side cutters EUROline-Conductive |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Beeprog2C |
1 x | quantum revolving center CM2 |
1 x | machine base with shelves for D250X550 |
1 x | Blade for Wood and Plastics |
1 x | End side cutters 45º EUROline-Conductive |
1 x | Jig saw blades made of HSS |
1 x | Flat nose pliers 45º EUROline-Conductive |
1 x | Universal polishing paste |
1 x | Glass fibre contact cleaner brush |
1 x | BeeProg2 |
1 x | Blade for Steel and brass |
1 x | Mini side cutters EUROline-Conductive |
1 x | 4-jaw chuck individually clamping 125mm |
1 x | Quick-action tool holder kit SWH AA |
1 x | Steady rest for D250X550 |
1 x | Lathe tools 10mm pastilhados |
1 x | lathe tools 10mm |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | MICROMOT Mains Adapter NG 2/E |
1 x | Morse taper MT2 - B16 |
1 x | 3-jaw chuck centrically clamping 125mm |
1 x | Mini side cutters EUROline-Conductive |
1 x | Lathe chuck flange for D250X550 |
1 x | Five piece HSS chisel set |
1 x | Round nose pliers 45º EUROline-Conductive |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Super jig saw STS/E |
1 x | Sanding fleece for LWS |
1 x | Backing disc for LWS |
1 x | Scroll saw DS 230/E |
1 x | Tungsten carbide cutters set |
1 x | MICRO shaper MP 400 |
1 x | 2-speed scroll saw DSH |
1 x | Corundum fan sander for LWS |
1 x | Corundum sanding discs for LWS |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Corundum fan sander for LWS |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | MICRO Band Saw MBS 240/E |
1 x | Corundum bound cutting disc for LWS |
1 x | Corundum sanding discs for LWS |
1 x | Motor-driven carving device MSG |
1 x | Step clamps made of steel |
1 x | Chuck for TBM 220 |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Sanding fleece for LWS |
|
€36,870.81 |